Monthly Archives: December 2013

Voice of Russia to remain on the air in 2014

RIA Novosti Newsroom, Moscow (Source: Wikipedia)

RIA Novosti Newsroom, Moscow (Source: Wikipedia)

This year has been a confusing one for Voice of Russia listeners.  At least two separate news sources–in August and December–announced that VOR would be leaving the shortwaves effective Jan 1, 2014, but VOR couldn’t confirmed or denied the news.

Then, only two weeks ago, Russian President Vladimir Putin surprised us all by essentially liquidating the Voice of Russia and merging it with Rossia Segodnya newswire in sweeping changes affecting all Russian state media.

I was curious if this move might have changed VOR’s outlook on the shortwaves, so I contacted VOR to see if they had any official word. I received the following response this morning:

“We are glad to let you know that the Voice of Russia will stay on the air in 2014, however, considerable changes in our frequency schedule are expected. The information on the updated frequency chart will become available on the Voice of Russia’s web site before the New Year at http://voiceofrussia.com/radio_broadcast/frequencies/ , so please stay logged in.

You may have already read about the planned merger of the VOR an RIA Novosti Press Agency in the upcoming year, for details please see the article at http://voiceofrussia.com/news/2013_12_09/President-Vladimir-Putin-issues-decree-to-reorgonize-Voice-of-Russia-RIA-Novosti-to-Rossia-Segodnya-news-wire-1689/

Spread the radio love

Just arrived! The 2013 Pirate Radio Annual

Happiness is finding the new 2013 Pirate Radio Annual in your mailbox!

2013 Pirate Radio Annual

If you love pirate radio, or simply want to learn more about it, the Pirate Radio Annual is a must read!

Find out how to get your own Pirate Radio Annual by clicking here. I’ll try to post an overview in the coming weeks.

Spread the radio love

WG2XFQ: Brian Justin’s holiday longwave broadcasts

Reginald Fessenden: "The Father of Radio Broadcasting" (Source: Wikipedia)

Reginald Fessenden: “The Father of Radio Broadcasting” (Source: Wikipedia)

SWLing Post reader, Tom, recently shared a link to an article on the ARRL news page which describes this annual longwave broadcast:

“As he has over the past several years, Brian Justin, WA1ZMS/4 — an active participant in the ARRL’s WD2XSH 600 meter experimental project — will transmit voice and music on 486 kHz as WG2XFQ on Christmas Eve and Christmas Day and again on New Year’s Eve and New Year’s Day. Transmissions will begin at 0001 UTC and end at 2359 UTC.

Justin, who may be better known for his microwave exploits on ham radio, will use an AM audio loop modulating his vintage-style, homebrew transmitter to honor Reginald Fessenden’s Christmas Even 1906 AM voice transmission.”

Since I’m a sucker for radio history, I contacted Brian Justin and he kindly answered a few questions:

Brian Justin with his homebrew transmitter (Source: http://w4dex.com/500khz/wd2xsh31.htm)

Brian Justin with his homebrew transmitter (Source: w4dex.com)

SWLing: How did you first become interested in longwave (LW)?
Justin: Always had an interest in history of radio since becoming a ham at age 11. Early wireless had emphasis on LW and so it was a good trail to follow in my years as a ham.

SWLing: Is the process of getting a license to broadcast complicated?
Justin: Yes and No. What I hold is not a broadcast license as a TV or FM or AM station would have. I hold an FCC Part 5 license which is for The Experimental Radio Service. The LW and MF spectrum is formally US Govt spectrum that is managed by the NTIA (the US Govt Agency version of the FCC). So before the FCC can issue any license that is in non-FCC regulated bands the NTIA must first approve any license Grant. A good number of people who are involved in radio today don’t always understand the difference between FCC and NTIA spectrum. But licenses can be granted if you have the willingness to wait and know how the application process works. It’s not all that difficult once you know the context of what one is asking for.

SWLing: What is the best time to listen for WG2XFQ and how can listeners improve their chances of hearing you?
Justin: The transmissions are only a few times each year to mark historical dates in radio history. I try to make at least two each year, one for Fessenden and one for the Berlin Radio Treaty. I also ran one on the 100th Aniv of the sinking of the Titanic since wireless played a big role in the tragic event.

A loop antenna is a good antenna to try as one can at least null any loud noise source. But simple E-field probe antennas have worked for many in years past.

Anyone who copies WG2XFQ is encouraged to submit a logging of it at 500kc.com.

Thank you and good DX to all this Holiday Season. I hope I can deliver a tiny DX gift to all if the band is in good condition this year.


Many thanks, Brian!

I will be listening for WG2XFQ on 486 kHz on December 24th and 25th, then again on December 31st and January 1st. With any luck, and if conditions are favorable, perhaps I’ll hear a little longwave DX commemorating Reginald Fessenden’s Christmas Even 1906 AM voice transmission.

Readers, be sure to check out Brian Justin’s web page and the ARRL 600 meter experimental group’s website. Please log your WG2XFQ listener reports at: 500KC.com

If you would like to learn more about Reginald Fessenden, check out Fessenden.ca.

Spread the radio love

David Goren’s numbers station piece featured on 99% Invisible

99invisible-logo-itunes-badgeWe’ve mentioned “Shortwaveologist” David Goren on the SWLing Post multiple times. David is a talented radio producer who also happens to be a life-long avid shortwave radio listener.

One of David’s productions, Atencion! Seis Siete Tres Siete Cero: The Mystery of the Shortwave Numbers Stations, first aired in 2000 as part of the NPR series Lost and Found Sound. It’s a richly layered soundscape, a sonic journey woven together by David’s narration and a series of interviews in a form of personal documentary–and it’s simply inspired.  This piece caught the attention of Roman Mars, producer of my all-time favorite podcast, 99% Invisible. I’m pleased and proud to report that 99% Invisible‘s latest podcast features this brilliant numbers station piece of David’s.

For those of you who don’t know, 99% Invisible now has, deservedly, one of the largest listenerships in the podcasting world. A version of their show is also produced and aired over NPR. This piece will give shortwave radio significant exposure, and in turn make it a little less…well, invisible.

Intrigued?  Join us–and begin by listening to David’s feature.  Either subscribe to 99% Invisible via your favorite podcasting software, download the show as an mp3, or simply listen on 99% Invisible‘s website by clicking here.

ShortwaveologyLogoBe sure to check out David Goren’s updated website Shortwaveology.net which has an array of his own audio productions as well as a sound clips and a listener’s (b)log.  It’s terrific.

PS–If you would like to meet David in person, plan to attend his annual listening event: the Shortwave Shindig at the Winter SWL Festival in Pennsylvania (you have registered for the annual SWL Fest, right?).

David, we look forward to any and all of your future work (rumor has it that he’s working on Shortwaveology #3)…Stay tuned!

Spread the radio love

Video: PL-880 soft muting on SSB

Many on the PL-880 Yahoo Group have been reporting “soft mute” or “noise gate” audio jumps that are heard when the PL-880 is tuned to a weak SSB signal.

SWLing Post reader, Tim, has a Tecsun PL-880 with firmware version 8819 (mine is 8820) that exhibits this soft mute behavior. Check out the following video where he uses the built-in attenuator to force the PL-880 to engage the soft mute. Tim notes that the sound quality of his $30 camera phone is poor, but I can still easily hear what’s happening:

There have even been confirmed reports of SSB soft muting in PL-880s with 8820 firmware. With that said, I have now spent hours trying to force my PL-880 to engage soft muting in SSB, but to no avail.  My SSB copy is solid, regardless of signal strength, noise level, or adjacent signals (at 5, 10 or 15 kHz and much closer)–no muting at all in SSB.

While I’m very pleased with my PL-880, I would encourage many readers to consider waiting a couple of months before making the purchase. Many of the PL-880 early adopters have felt a bit like Beta testers–admittedly, I’ve felt this way as well–but with time, I imagine many of the 880 quirks will be ironed-out by Tecsun.

Spread the radio love

Repairing the Tecsun PL-600 after electrostatic discharge (ESD)

SWLing Post reader, Michael Taniwha (NZ1MT), has kindly documented how he repaired his Tecsun PL-600 after it went silent on the shortwave bands. If this has happens to you, don’t toss your PL-600, use Mike’s excellent guide below for an inexpensive repair.
(Click on images to enlarge)


TECSUN PL-600 – Electrostatic Discharge Repair
Tecsun-PL600

My TECSUN PL-600 had been a trusty bedside radio companion for the last two years. The radio is also my alarm clock and I use the timers to wake me up each morning to my local AM station WHYN or Radio Australia on SW.

On November 29, 2013 I turned the TECSUN PL-600 on and attempted to tune into some SW stations and was surprised to find the radio stone deaf on all the SW bands….similar to the Steely Dan song FM (No Static At All) except in this case it was SW (No Static At All). Immediately my first thought was that the radio had probably suffered an Electrostatic Discharge (ESD) when I had touched the external antenna while moving it around earlier in the day. I reset the radio and tested all the bands, AM and FM bands seemed to be working OK, yet SW remained dead.

My next step was to open up the radio and look for the obvious.

IMGP0092

Upon opening the radio I was surprised to see two back-to-back IN4148 diodes (D17 & D18) fitted across the external antenna input to ground and that the diode D17 was cracked in half. The back-to-back diodes offer a very high resistance at the micro-volt RF level, but will conduct once the forward voltage (Vf) raises above 1.0V. So for the cost of a few pennies we have a relatively cheap and dirty ESD protection circuit.

IMGP0095

My first thought on the cause of the cracked diode was a manufacturing defect when the diode was soldered in at the factory (in fact I later discovered it was likely broken during assembly of the rear cover at the factory – read on). My next thought was just my luck that the broken diode was probably in the polarity direction that I needed the ESD protection.

The next step was to locate a schematic diagram and start circuit tracing to find the likely blown front-end RF pre-amplifier FET/MOSFET that had been damaged. As luck would have it a schematic of sorts is posted in the TECSUN PL-660/PL-600 Yahoo Groups. See the following Link.
http://groups.yahoo.com/neo/groups/TecsunPL660TecsunPL600/files/PL%20600%20Schematics/

The only issue is the text is mostly in Chinese! However, the parts on the radio PC board are clearly labeled as are the parts on the schematic.

IMGP0109 schem

What I quickly notice is that the schematic shows no ESD protection on the front end (upper highlighted circle), but in fact the radio has additional parts D17and D18 (the back-to-back diodes), and C57 on the PC board coming from the external antenna jack. Whenever the external antenna jack is used the jack disconnects the radios telescopic antenna which is connected to C68 to the antenna jack switch circuit. After this antenna switch the schematic from C126 onwards is correct. Following the schematic we see that both the telescopic antenna and the external antenna go through the DX/NORM/LOCAL antenna switch to the IQ3 (AGC?) transistor and then to the RF pre-amp 2Q1 FET (lower highlighted circle). My educated guess was that the 2Q1 FET type 2SK2394 was damaged by the ESD. Yes the 2Q1 it is a very small SMD type FET.

IMGP0097

My reasoning for the 2Q1 having failed is that FM reception was not affected as the antenna circuit goes directly to the TA75358AP FM decoder chip IC1.

SchematicPL-600

Similarly, AM reception was not affected as the AM signal is primarily from the ferret bar AM ANT coil that uses the 1Q1 FET for RF pre-amplification.

PL-600 Scem2

At this stage I contacted Kaito Electronics Inc. the official US based distributor of TECSUN radios and inquired if they provide component level repairs or provide replacement SMD components. The answer was no to both questions.

I then started hunting around online to locate a replacement 2SK2394 FET which is a Sanyo manufactured FET and finally found one for sale on eBay from hkutsource (Hong Kong UT Source) for $2 + $4 shipping. See following eBay link.

http://www.ebay.com/itm/2SK2394-7-Manu-SANYO-Encapsulation-SOT-23-High-Speed-High-Current-Switching-/130835554230?ssPageName=ADME:L:OU:US:1120

This FET is listed as a 2SK2394-7 but all the specifications line up against the specifications for a 2SK2394. I ordered it on December 6th and it arrived 10 days later enclosed in an ESD bag and packaged in a sturdy little box.

IMGP0116

IMGP0117

IMGP0118

Now the fun starts. To replace the 2Q1 SMD FET I used my needle nosed 40W soldering iron, vacuum pump solder remover and wore my ESD strap to stay grounded. First step was to remove the existing 2Q1 FET.

IMGP0119

Next step was to install the replacement 2Q1, if you haven’t worked with SMD devices before let’s just say it is like working with a live insect, they are small and seem to move around on their own accord.

After much tooth pick (my hi-tech SMD tool) maneuvering I finally had it installed. OK I admit it is a little skewed. Have you noticed I have also installed a replacement D17 diode at the top right of the picture?

IMGP0122

The moment of truth! At this stage I did a quick radio check and fired up the PL-600 on the SW band and tuned into CHU, the Canadian Time Station on 3330 kHz, and picked up a time pip signal. In addition I was tuning into other SW stations and had plenty of static as well.

I now decided to install additional ESD protection on the telescopic antenna input as well using two IN4148 back-to-back diodes. After a quick hunt around in my junk box I located an old PC board with a few IN4148 diodes attached. Quickly removed and tested them using my multimeter diode checker.

IMGP0112

IMGP0111

I then installed the additional ESD diodes as shown below (the ATN label on the PC board is where the antenna wire from the telescopic antenna on the back over is attached).

IMGP0124

Finally it was time to reassemble the radio. This is when I started having real problems as the rear cover just would not reattach. When I looked closely I could see that the plastic support screw hole on the rear cover for the telescopic antenna sits partially against the PC board where the D17 diode is located. Now that explains why that diode was cracked when I first opened up the radio at the beginning of this repair. It appears the two ESD diodes were probably a design afterthought and the rear case wasn’t adjusted to accommodate their location on the PC board.

IMGP0125

To get around this issue I removed the replacement D17 and relocated it to the lower part of the PC board below C57. Once I had moved D17 I could now reassemble the radio and again tested the radio. My TECSUN PL-600 is now back to its trusty role beside my bed and picking up SW stations.

Mike-Tecsun-PL-600-Repaired

In summary if you have a TECSUN PL-600 or PL-660 that is deaf on the SW band it is likely to be an ESD damaged 2Q1 RF pre-amplifier 2SK2394 FET. For $6 and some time and effort you can replace the FET and have your radio back up and running like new.

Michael Taniwha – NZ1MT
Email: To send Michael an email, simply insert his callsign @YMAIL.COM
December 17, 2013


Many thanks, Mike, for the excellent documentation and detailed photos! 

Note that you can also download Mike’s guide as a PDF on the Tecsun PL-660/600 Yahoo Group (membership required).

Spread the radio love

Pirate Radio Recordings: Radio Free Whatever, Pearl Harbor Tribute

960px-USS_SHAW_exploding_Pearl_Harbor_Nara_80-G-16871_2

For your listening pleasure: one hour, seven minutes of the pirate radio station, Radio Free Whatever.

I recorded this broadcast on December 15 2013, starting around 2:40 UTC, on 6,925 kHz AM. This broadcast was a tribute to WWII and Pearl Harbor and contains news clips and music from the same time period. I believe my recording begins about five or so minutes into their broadcast.

Simply click here to download an MP3 of the recording, or listen via the embedded player below:

Spread the radio love