The new LNR Precision LD-11 transceiver is essentially general coverage

LNR-Precision-LD-11

A couple weeks ago, LNR Precision sent me their new LD-11 Digital Direct Conversion QRP transceiver on loan for review.

The LD-11 is basically a small, tabletop SDR transceiver. It’s like a miniature, simplified version of the Icom IC-7300 I’ve also been evaluating.

The LD-11 is an all-mode and all-band transceiver–meaning, it includes SSB, CW, CW-R, Digi, AM and FM modes on all amateur radio bands (160 – 10 meters).

Though the LD-11 isn’t advertised as having a general coverage receiver, it will indeed tune the entire HF band.

You do this by entering the LD-11’s administration mode. LNR describes this in the LD-11 product manual, but suggests you contact them for help the first time you do this. In the admin panel, you’ll find functions that allow you to set the band edges on each amateur radio band.

For a preliminary test of broadcast reception, I moved the lower band edge of the 30 meter ham radio band to 8.2 MHz.

LNR-Precision-LD-11-front panel

After saving the settings and re-starting the LD-11 in normal operation mode, I could then tune the entire 31 meter broadcast band on the LD-11.

Hypothetically, you could either widen each amateur radio band to include adjacent broadcast bands, or you could simply set one of the ham bands to include the entire HF spectrum. To make it easier to navigate and tune through the bands, I’m choosing the former method over the latter.

Since the LD-11 has a proper AM mode, broadcasts sound great–especially via headphones!

Proper AM filters for broadcast reception!

Better yet?  The AM filter width can be widened to an impressive 9.6 kHz! Woo hoo!

LNR-LD-11-Shortwave-AM

The LD-11 has four filter slots: F1, F2, F3 and F4.

The F1-F3 slots can be set to a fixed user-defined widths (common widths are default).

F4 can be altered to any available filter width without having to enter the admin mode of the transceiver. Simply press the “F” (blue function button) and the FILTER button simultaneously and use the encoder/tuning knob to specify the filter width in .1 kHz steps. Pressing the F and FILTER button simultaneously again, will save your filter width for the F4 position.

I’ve been using the F4 filter position for widths between about 8.2 and 9.6 kHz in AM.

It’s still early days with the LD-11, but I’m enjoying this little transceiver immensely. It reminds me of one of my favorite QRP transceivers of yesteryear: the Index Labs QRP Plus (though the LD-11 is much smaller, more versatile and has a much better front end than the QRP Plus!).

LNR Precision sold out all of their first run LD-11 units within moments of having announced availability. I’m willing to bet they’ll bring a few LD-11s to the upcoming Dayton Hamvention, though.

Check inventory status and view LD-11 details on LNR Precision’s website. 

Spread the radio love

21 thoughts on “The new LNR Precision LD-11 transceiver is essentially general coverage

  1. Jerry Stewart

    An HW-8 was $129 in 1977. In today’s dollars, that is $490 for a 4-band, single mode, 2 watt TX, with direct conversion RX transceiver and a LOT of compromises (not to say they are not fun to operate, regardless). For those that want a full HF multi-mode SDR that is assembled and has capabilities that were unavailable in ANY radio made in 1977 at less than the cost of an HW-8, dream on. Hams are notoriously cheap but at half that price, you can buy a single band analog SSB transceiver and power supply from MFJ, so there are your options. Get real.

    Reply
  2. Aaron

    I’m interested to see this compared to the KX3 and the FM-DUO. It’s really exciting to see this many $1000-ish rigs that are portable, have good receivers, and are highly capable when connected to a computer. (maybe the FLEX-1500 and ANAN-10E as well, SDR QRP is getting exciting!)

    Reply
  3. Erica cole

    Does this tranceiver have a voice guide option for screen-free operation? I’d love to play with something like this but bet none of them have speech output (frequency And keypress announcement).

    Reply
  4. ? Blind

    What is/are the receive bandwidth(s) on SSB? How does skirt selectivity compare with other similarly priced transceivers (not that i’d understand the spec…)? Is transmit bandwidth fixed, or can transmit bandwidth be widened for ESSB?

    Reply
  5. Steven Andros

    I wanted one of these – bad – until I saw the price!

    Whiskey Tango Foxtrot!!! 775 bucks?
    Even at half that price – I’m not interested…

    Obviously there’s a market for it.

    Reply
    1. Nick

      Steven ,
      I am one of the creation group. Just software (firmware) cost is over 40000usd.
      BOM is having 700+ components. Other hardware is about 120usd/pp.
      Price is features defined, always!

      Reply
  6. Mario

    I want this radio and in the red color! From what I’ve seen and heard so far there is nothing not to like. Takes me back 1981 when I bought my first QRP transceiver, the TenTec Argonaut.

    Indeed this is a great time to be a radio hobbyist with all the new SDR technology becoming mainstream. And the LD-11 seems a lot less complicated than some of the high end Japanese radios with tons of keypads and knobs. My spending finger is getty itchy hi hi.
    Thanks Thomas.

    Reply
    1. Thomas Post author

      I agree, Mario! Seems like all of my other radios are a variant of black. It’s kind of nice to have a red chassis–looks great on the table, too.

      You couldn’t be more correct about the advent of the SDR. It has made some pretty amazing features and performance accessible to most every ham. The prices also keep getting lower and lower.

      Over the course of the next few weeks, I’ll be comparing the LD-11 to my KX3.

      One of my favorite features on the LD-11 is the panadapter/spectrum display. It’s very basic, but quite useful to have in the field!

      -Thomas

      Reply
      1. Nick

        Thomas,
        Thanks for comments, I am happy to see some acceptance. Cost us lot of sleepless nights and nerves.
        I will be pleased to talk to you outside this site.

        Reply
  7. Edward

    How does it sit on the table? Does it have a stand or do you have to prop it up on some books? I like the fact that they labeled the controls and located the tuning knob directly below the display.

    Reply
    1. Thomas Post author

      It has two legs that fold out from the bottom of the unit–they prop the radio up for a proper operating angle. Of course, it can also sit flat, too, as it has small rubber/silicon pads on the bottom.

      The layout of the buttons is quite well thought through. I wish the encoder had a finger dimple, but that can be fixed easily enough!

      Reply
  8. gw1hin

    OMG. I want one and I want it now please. It is obviously the future in SDR transceivers yet to come. If the price can be kept down by mass production them I think many people will buy one, just for the ‘fun factor’, if nothing else.
    Ron

    Reply
  9. Mick

    It has an “administration mode”.
    Contact the factory before using general coverage radio !!
    It does not look like a radio.
    One of the pleasures of QRP is the use of simple equipment. Perhaps it is my age but this machine is not in keeping with what I would regard as being QRP, or any radio for that matter !

    Reply
    1. Thomas Post author

      This is actually a pretty simple purpose-built piece of QRP kit.

      The first day I used it, I worked the Czech Republic, Hungary, Spain, and Bermuda with 5 watts in SSB! All from here on the east coast of the US.

      I’m with you: I *love* simple QRP rigs, but it is awfully nice to have small, lightweight, multi-purpose modern rigs as well.

      I reckon I’m a bit radio geek and okay with the full spectrum of QRP radios!

      -Thomas

      Reply
      1. Mick

        I use QRP at 5 watts, the lowest my FT991 will go. I do have an FT817 on order, waiting for another delivery to the UK.

        Reply
          1. Mick

            Aaron.
            My FT817 arrived last week and the menus were very easy to set up. There is no need to enter the hidden menus. The article you link to is pointless, for example, “believed to be”, if they do not know then why publish such rubbish ? I am delighted with the FT817 receiver, it makes you wonder why any more is needed….

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.