A review of the Elecraft KX2 general coverage QRP transceiver

The following review first appeared in the November 2016 issue of The Spectrum Monitor magazine.


elecrat-kx2-review

The Elecraft KX2 tuned to Radio Australia.

It’s not every day that I get exciting news about the production of a new radio.

It was two days before the 2016 Dayton Hamvention–the day before the Four Days in May QRP conference–as I was eating lunch en route to Ohio, that I received the news: Elecraft had just announced a new transceiver, the Elecraft KX2.

Elecraft being known for their exceptional products, I thought instantly, hmmmm, this could be interesting.  I immediately dropped everything and contacted Elecraft, asking, “When can I see this new rig?”

Wayne Burdick (N6KR) of Elecraft kindly sent me a few specs, and the following day, I previewed the KX2.

What is the KX2?

In short: the KX2 is a feature-rich pocket QRP transceiver. For those who are familiar with the Elecraft product line, it’s like a KX3 (feature rich portable rig) in a KX1-sized (much smaller, handheld/pocket) package.

The Elecraft KX2 (left) and KX1 (right)

The Elecraft KX2 (left) and KX1 (right)

The day before the Dayton Hamvention, Elecraft allowed me to snap some photos, ask some questions, and generally give their new little rig a once-over.  After holding their new offering in my hand–it’s slightly narrower, if a bit thicker, than a paperback book–was already tempted to plunk down $749 for the KX2 right then and there.

Comparing the size of the Elecraft KX3 (top) and KX2 (bottom) at Elecraft's Dayton Hamvention booth.

Comparing the size of the Elecraft KX3 (top) and KX2 (bottom) at Elecraft’s Dayton Hamvention booth.

So, what what stopped me? For one, I was less than two weeks away from taking a two month trip in Canada, and already had an (embarrassingly) large number of radios to take along. I also had a few other reviews in the works and needed to finish them prior to evaluating the KX2.  And–let’s face it–that kind of cash is significant to a reviewer like me.

Yet there was another consideration–two, actually: I already own both the KX1 and KX3 transceivers, and like them very well. Come on,  I chastised myself, as I continued to admire the latest Elecraft in its tiny package. Wouldn’t a KX2 be rather…redundant?

Nonetheless, in August I took the plunge and ordered a KX2. Perhaps it was a leap of faith…or a momentary lapse of judgement that led me down temptation lane. At any rate, I had been doing enough NPOTA activations that I fell for the idea that I could potentially have the advantages and performance of the KX3 in an even smaller, even more portable, package.

Would there be buyer’s remorse? The only way to tell, obviously, was to put the KX2 on the air.

Learning my way around the KX2

I imagine a lot of new KX2 owners will be Elecraft veterans like myself. Once you’ve used Elecraft equipment for a while, you begin to understand how the company designs their menu trees and functions. In other words, once you’ve experienced the Elecraft ecosystem, moving from one radio to another becomes easier.

The KX2's on-board microphone is located on the left side of the front panel and works very effectively especially in an HT configuration.

The KX2’s on-board microphone is located on the left side of the front panel and works very effectively especially in an HT configuration.

I approached the KX2 with confidence, having owned the similar KX3 for three years and the K2, K1 and KX1 for many years.

 The left side of the KX2 is where all connections are located, save the antenna connector.

The left side of the KX2 is where all connections are located, save the antenna connector.

The BNC antenna jack is located on the right side of the KX2.

The BNC antenna jack is located on the right side of the KX2.

I plugged the KX2 into my power supply, main antenna, and powered it up by pressing the Rate and A/B buttons simultaneously (a clever keylock method). The KX2 defaulted to the 20-meter band. I started tuning around and quickly realized that the SSB mode was set to the lower instead of the upper sideband. No problem, I thought, and instinctively pressed and held the MODE button to switch from LSB to USB. This is where I found the first difference between KX2 and KX3 functions. Pressing and holding mode button on the KX3 toggles USB/LSB, but on the KX2 it enters the frequency memory store mode.

I tinkered with the KX2 MODE button to no avail, so reached for the KX2 owner’s manual, fortunately a well-written tome. Turns out, to switch between USB/LSB, you:  enter the KX2 menu system, select the ALT MD entry, then switch the “alternate” to the “normal” SSB band mode, which moves it to USB on the 20-meter band.

A number of functions accessed on the front panel of the KX3 require using the menu system on the KX2. RF Gain is another example of this, as I discovered pretty quickly.

This got me thinking.  I don’t envy the folks at Elecraft who have to sort out the ergonomics and functionality on a radio as small as the KX2. I decided I’d better check out the owner’s manual and familiarize myself with the functions I use the most in the field.

Elecraft manuals are superb; they're spiral bound, easy to read and comprehensive.

Elecraft manuals are superb; they’re spiral bound, easy to read and comprehensive.

I must say, Elecraft has done an admirable job of keeping the most essential functions on the face of the radio and tucking the less-used functions into the background of their menu system [Not to suggest access is ever complicated, considering that you just 1) enter the menu, 2) select the function, and 3) change the parameter…that’s it.]  No doubt, the reason for their success is the fact that their key designers, like co-founder, Wayne Burdick (N6KR), actually operate radio in the field–they get it.

Speaking of the field, that’s exactly where I wanted to take the KX2 to test, since that’s clearly where the rig’s designed for use. Note here that this is not a base rig: its size and features lends itself very well to a pack radio–one I wanted to keep packed and at-the-ready!

Packing up…

Prior to receiving the KX2, of course, I did some pack research (those of you who know me know that I’m a bit of a pack geek).

Elecraft was actually selling two models of a LowePro pack that fit the KX2 exactly: the ViewPoint CS 40 and ViewPoint CS 60. Though I searched far and wide, I couldn’t find a pack from some of my favorite manufacturers (such as Spec-Ops Brand, Red Oxx, and Tom Bihn) that has the right amount of padding, exact space and fit for the KX2, as did the CS 40 and CS60. So I purchased the larger CS 60–the larger of the two packs.

kx2-lowe-cs60-bag

My Elecraft KX2 kit then consisted of the following:

  • The Elecraft KX2, with internal battery and ATU options
  • An LnR Precision EFT Trail-Friendly antenna (purchased at the Dayton Hamvention)
  • An assortment of relevant connectors and adapters
  • An Elecraft hand mic, borrowed from my KX3
  • A CW paddle (the KXPD2)

All of this–save  fishing line, weight, six-foot coax cable and clipboard–were protected by the compact and perfectly portable LowePro ViewPoint CS 60 padded case, and fit it like a glove. I tucked the whole kit quite conveniently into my 20-year-old Dana Design lumbar pack.

The only way to know if the kit was complete, was to take it to the field. Nothing like trial by fire.

NPOTA: National Parks On The Air

Elecraft-KX2-Clipboard-NPOTA

My first NPOTA activation with the KX2 field kit was at the Carl Sandburg Home in East Flat Rock, NC.

After hiking about twenty minutes to my trail location and setting up the station, which I found to be a fairly simple process, I realized that the KX2 is so compact that it easily fit on the clipboard I was using to hold my log sheets. Thus, the clipboard instantly became my laptop operating table.

As soon as I sat down in my folding chair, I turned on the KX2, set the frequency to 14,286 kHz, and pressed the ATU button, which gave me a 1:1 match (since the EFT is resonant).

Next, I recorded my CQ call into the KX2’s built-in voice keyer by:

  1. pressing and holding the MSG button,
  2. assigning the voice message to “memory allocation 1” by pressing the PRE (1) button,
  3. pressing XMIT to start the recording,
  4. reading off my CQ call, thus: “CQ, CQ, CQ, this is K4SWL calling CQ for National Parks on the Air…”, and
  5. pressing XMIT again to stop the recording.

Then, I started calling CQ by simply pressing the MSG button and selecting my message stored in memory allocation 1 by pressing and holding the PRE (1) button.

By pressing and holding the PRE (1) button, I initiated a loop-playback of my CQ call where my KX2 would transmit my call from memory.  Then I waited a few seconds to listen for any replies, and played it again. (In loop-playback mode, I’d learned that the KX2 will repeat my CQ call until I interrupt it by pressing a button or keying my mic.)

It’s a brilliant and easy function which saves my voice. By automatically calling CQ, it  gives me an opportunity to answer questions from curious passersby who were naturally fascinated by a guy sitting on the side of a trail, talking into a little box connected to a tree-branch suspended wire.

In the end, I didn’t even need to use the voice keyer that much. I worked my minimum of ten stations within six minutes! Of course, I continued to call CQ until I worked everyone in the pile-up (including stations from California, Nebraska, Kansas, Texas, and Mexico–thanks, folks!).

Result?  Wow.  That first field experience at the Carl Sandburg home couldn’t have gone better. And the KX2 had quite a lot to do with that outcome–both in function and form-factor.

Since then, I have taken the KX2 on more than twenty NPOTA field activations, and my compact field kit is making impromptu activations a breeze. Indeed, by the time you read this review, I’m guessing I’ll have added a dozen more NPOTA activations with the KX2 field kit.

[Update: At time of posting this review, I have a total of 54 NPOTA activations–almost forty have been made with the KX2.]

Internal battery option

Activating PK01 (The Appalachian Trail) with the KX2

Activating PK01 (The Appalachian Trail) with the KX2

One of the things that make the KX2 so easy to set up is the fact it can run quite effectively on a high-capacity internal LiPo battery pack.

kx2-battery

The KX2’s 10.8V 2600 mAh LiPo battery

On one particular set of activations, while returning from the W4DXCC conference in late September, I activated several sites, including a couple of “two-fer” sites, just during my drive home. I only used the KX2’s built-in battery to power the rig. I was on the air almost three full hours of fairly intense transmitter use (repeating my CQ call through the voice keyer). The KX2 was able to pump out a full 10 watts of power for a little over one hour, then as the voltage dropped, it reduced output to 5 watts.

I feel like this is impressive performance from such a small battery pack. It’s a little pricey (at $84.90 US for both the battery and external charger), but very much worth the cost if you’re splurging for a KX2, anyway.

View of the Elecraft KX2 battery compartment. Note the speaker wires which attach the two halves of the chassis.

View of the Elecraft KX2 battery compartment. Note the speaker wires which attach the two halves of the chassis.

One complaint: I’m not crazy about the fact that the LiPo battery must be removed from the KX2 in order to be charged. To gain access to the battery, you loosen the two thumb nuts on either side of the KX2, then carefully open the back compartment. You must be careful because two speaker wires are attached to the back panel which holds the internal speaker; if you yank it open, you could disconnect the speaker.

I’ve read a report from an NPOTA activator who said that, in the process of multiple openings/closings of the back plate, the speaker wires have rubbed bare spots on the insulation. He used black electrical tape to fix the problem. So far, I haven’t noticed this, but I certainly see how it could happen with time.

Operating a NPOTA "two-fer" under the Blue Ridge Parkway and in the Great Smoky Mountains National Park.

Operating a NPOTA “two-fer” under the Blue Ridge Parkway and in the Great Smoky Mountains National Park.

In the end, I give Elecraft a little grace on this point. After all, this is the first transceiver they’ve ever produced that doesn’t have a kit form, plus they’re trying to satisfy the needs of battery and charging circuit while keeping costs down, as well as make everything fit in an almost paperback-sized enclosure.  Frankly, this works fine.  I don’t mind the extra care required because, in the end, having such a capable internal battery outweighs any inconvenience of charging at home.

Elecraft, if there’s a way to reinforce the speaker wires, that would likely help.

KXAT2 Internal ATU Option

I ordered the KXAT2 internal ATU option with my KX2. Having used the KX3 internal tuner for years, I guessed this might be an excellent ATU, as well.

And it is. In the field, I’ve used a variety of wire antennas, and the KX2’s internal ATU has matched them beautifully.

So, exactly how good is the KXAT2? The following story will give you an idea.

I brought my KX2 along to the W4DXCC conference in late September. The conference has a club station that consists of two Icom IC-7300s which are hooked up to a variety of antennas. During the conference, my buddy WD8RIF was activating a particularly rare NPOTA site. My only chance of working him was on 40 meters.

Conference attendees took turns operating the KX2.

Conference attendees took turns operating the KX2.

Unfortunately, out of all of the self-supporting antennas erected on site, none were resonant below the 20 meter band. I had no means to properly hang my 10/20/40 meter EFT Trail-Friendly antenna at the hotel, so out of desperation, I tried to load a 20 meter hex beam on 40 meters at QRP power using the IC-7300 and its internal tuner. In short, the IC-7300’s ATU couldn’t find a match and refused to transmit.

But I had my KX2 in my field pack. I set up the KX2, connected it to the 20M hex beam, tuned it to 40 meters, and hit the ATU button.  The KXAT2 promptly found a 1:1 match!

Using the Elecraft KX2 on 40 meters at the W4DXCC conference while attached to a 20 meter hex beam.

Using the Elecraft KX2 on 40 meters at the W4DXCC conference while attached to a 20 meter hex beam.

Granted, we were only operating 10 watts, but even the IC-7300’s internal ATU wouldn’t work at that same power level.

In short, if you plan to operate portable with the KX2, do yourself a favor and order the KXAT2 internal tuner, as well. Clearly, it’s ability to match is impressive.

KXPD2 keyer paddle option

Elecraft also sells a small, attachable paddle that is custom-made for the KX2–it’s called the KXPD2 keyer paddle.

elecraft-kx2-kxpd2-paddles

I had not planned on acquiring a KXPD2 as I’m not the biggest fan of paddles that are attached directly to radios. I did, however, think back to my KX1 and the many times I operated CW while holding that little rig in my hands. To be clear, though, the KX1 paddles are primitive in comparison to the KXPD2, which has adjustable contact spacing and even built-in allen wrench storage.

One night at my local radio club, I passed the KX2 around with the KXPD2 attached and received a number of positive comments about it. I find it a pleasure to use, too, and lightyears better than my KX1 paddle.

In the field, I personally find the two thumb screws which attach the KXPD2 a little small to turn fluidly. This is due, primarily, to the fact I have bigger fingers. Steve (WG0AT) experienced the same problem, and came up with a creative solution: silicone rubber tape. He simply wrapped the tape around the thumb screws, giving them a larger tactile surface area. I’ll try this with my KXPD2 paddle screws, as well.

The KXPD2 is a brilliant little key, I must admit. I say this even though I feel the $109.95 price is rather high. Still: it’s a quality little product and I’ve been very pleased with its smooth action and precision. And, oh, yeah–a bonus–it will fit my KX3 as well!

General coverage receiver

In August, Elecraft pushed out a Beta firmware release on the KX2 which included AM mode. Following this release, I received a number of inquiries from SWLing Post readers asking for a comparison and audio samples.

Elecraft-KX2-Voice-Of-Greece-AM-Mode

At the time, I had the excellent LnR Precision LD-11 transceiver in the shack, so I thought I’d do a quick audio comparison with the KX2 since both price points are similar and both are transceivers with AM mode.

I set the LD-11 to a bandwidth of 9.6 kHz, and the KX2 to 5 kHz: the widest AM filter settings of each. Keep in mind, of course, that this is was not an apples-to-apples comparison, but it did showcase each radio’s potential AM audio fidelity.

To make the playing field as even as possible for these two disparate units, I tuned both rigs to the Voice of Greece on 9420 kHz around 00:30 UTC. VOG’s signal was strong into North America.

I made the following recordings with my Zoom H2N digital recorder, feeding in-line audio patched from each radio’s headphone jack. I tried to balance the audio levels between the two rigs as closely as possible to one another.

The LNR Precision LD-11

LNR-Precision-LD-11-AM-Mode-Voice-Of-Greece

Click here to download the audio.

The Elecraft KX2

Elecraft-KX2-Voice-Of-Greece-AM-Mode

Click here to download the audio.

The Elecraft KX2 in “Delay” audio mode

Elecraft-KX2-Delay-Audio-AM-Mode

Click here to download the audio.

The results from both radios are duly impressive. Since the LD-11’s bandwidth can be widened to 9.6 kHz, strong signals like this one sound pretty darn amazing. In truth, I actually prefer a filter width of about 8.2 kHz on strong signals, but VOG was wide enough to justify 9.6 kHz.  I believe the LD-11 would rival many dedicated tabletop receivers.

The Elecraft KX2, in normal audio mode, sounds flatter and narrower than the LD-11 of course, but still remarkably pleasant–a surprise, considering its limitations.

In the KX2’s “delay” DSP audio mode–available when headphones are used–the signal sounds much wider than 5 kHz, though the effect adds a little graininess to the audio. That’s okay, however; I appreciate having the “delay” audio option in my tool bag.

In the past several months, I’ve used the KX2 for shortwave broadcast listening, and each time I’ve been happy with it. It’s an exceptionally sensitive and selective receiver, with a stable AGC, thus would please the most dedicated DXer. Does it have the audio fidelity of the Drake R8B? No way. But its audio is very good, nonetheless, and it can dig weak DX out of the noise as well as any of my dedicated receivers.

After all, this is a ham radio transceiver, not a broadcast receiver, so I’m impressed that it can double as both.

Mediumwave reception?

While HF reception is very good, Elecraft is the first to tell you that KX2 mediumwave reception is strictly limited, and indeed rather poor:

“Sensitivity rolls off significantly below 3.0 MHz due to protective high-pass filtering. Preamp-on MDS is typically -105 dBm at 1.5 MHz, and -80 dBm at 1.0 MHz, sufficient for emergency AM broadcast signal copy.”

So, don’t plan on doing any mediumwave DXing with the KX2. It is sensitive enough, however, that I can receive strong local stations reasonably well.

Summary

elecraft-kx2-white-bkgrnd

Every radio has its pros and cons. When I begin a review of a radio, I take notes from the very beginning so that I don’t forget my initial impressions and observations. Here’s the KX2’s list, from the first moments I turned it on, to the present:

Pros:

  • Excellent sensitivity and selectivity
  • All modes: SSB, AM, CW, and Data (with built-in PSK/TTY decode/encode)
  • A convenient portable package for the field with needed options:
    • Built-in ATU option
    • Optional internal LiPo battery (see con)
    • With telescopic whip, the KX2 can be used as an HT via the internal microphone
    • Very quick deployment in the field
    • Built-in voice and CW keyer
  • Excellent general coverage receiver; AM mode effective for shortwave broadcast listening
  • Backlit display is easy to read in both shack and field
  • Numeric keypad for direct frequency entry
  • Considerate use of multi-function controls
  • Free and easy firmware updates via supplied software
  • Elecraft support and customer service

Cons:

  • Battery must be removed to charge; battery removal requires careful consideration of speaker wires (see pro)
  • Downward-facing speaker not ideal in the field unless back leg is used to raise off of surface
  • Price (shipped) exceeds $1,000 when loaded with ATU, battery, and external charger
  • Poor mediumwave/AM broadcast band reception (con) by design (pro)

Let’s be frank here: the cons I’ve listed above are rather nitpicky.

I suspect Elecraft will work on a better solution for the speaker wire (for those of us using the internal battery) or else KX2 users will come up with a creative modification.

In a perfect world, I also wish the KX2 were somewhat weather-proof or water-resistant. A couple of times, I’ve been operating in the field when rain caught me off guard. I feel like the KX2 is pretty vulnerable, so I either pack up the radio and stop operating, or I seek shelter if it’s available. It wouldn’t take a lot of moisture to penetrate the KX2 and there’s no way I’m letting rain ruin my rig. But I’m guessing weatherproofing would add significant cost.

So, did I experience any buyer’s remorse after purchasing the KX2?

Not in the least.  Between us, kind reader:  the KX2 has been a difficult rig with which to find fault. Price and inherent compromises for portability aside, there are really no serious negatives about this radio in my book. It suits my purposes very well.

Activating the Blue Ridge Parkway (PK01) with the Elecraft KX2 and "Silver Tip" 20 meter vertical. An effective combo!

Activating the Blue Ridge Parkway (PK01) with the Elecraft KX2 and “Silver Tip” 20 meter vertical. An effective combo!

Yet we reviewers cringe when our reviews appear this “glowing.”

I’m not a fanboy of any brand. I love to see companies introduce successful original products. I believe companies like Elecraft, CommRadio, LnR Precision, Elad, Icom, Yaesu, Kenwood, SDRplay, and the like are healthy for our hobby.

Competition and innovation are worthy friends.

Elecraft pushes our ham radio hobby forward, and it’s innovations like the KX2 that make our radio market and our hobby a dynamic and inventive space.

To be clear, I know the KX2 didn’t come out of nowhere. It’s the culmination of many iterations of Elecraft transceiver designs over the past eighteen years. Elecraft has taken feedback from customers, made notes, and improved their products with time, and it shows in this little rig.

The Elecraft KX2 is clearly a product of iterative agility.  It will, no doubt, be a market success.

I remember when Elecraft co-founder Wayne showed me the KX1 many, many years ago at the Dayton Hamvention. He told me that the KX1 was a step toward the perfect portable radio he’d dreamed of as a kid. The KX2 is simply that–and a profound upgrade of the KX1.  But more to the point, it might have been the portable of which I dreamed, too.

Check out the KX2 on Elecraft’s website: http://www.elecraft.com/KX2/kx2.htm

Spread the radio love

38 thoughts on “A review of the Elecraft KX2 general coverage QRP transceiver

  1. Pingback: SOTA DX with a 20 Meter Delta Loop on beautiful Yonah Mountain! | Q R P e r

  2. Pingback: KX2/AX1 Travel: Two Quick POTA Activations on the South Carolina coast! | Q R P e r

  3. Pingback: Testing the Ionosphere: A 100 milliwatt to 1 watt POTA Activation During a CME? Why not!? | Q R P e r

  4. Pingback: Out Of My Element: An Urban POTA activation at the Thomas Wolfe Memorial | Q R P e r

  5. Pingback: A beautiful (and hot) day for a QRP SOTA activation on Bearwallow Mountain! | Q R P e r

  6. Pingback: One Watt, Low-Profile QRP: A Labor Day POTA Activation at Lake James State Park | Q R P e r

  7. Pingback: Golden Hour QRP POTA Activation with the REZ Ranger 80 Portable Vertical Antenna | Q R P e r

  8. Pingback: Travelogue and Field Report: POTA and Aviation Geekery with Friends in Dayton, Ohio! | Q R P e r

  9. Pingback: Sometimes you just need a little radio-active therapy | Q R P e r

  10. Pingback: Deck Rail SOTA on Mount Pisgah and Improvising my Wire Antenna Deployment! | Q R P e r

  11. Pingback: This seven hour road trip calls for a QRP POTA break at Yatesville Lake State Park! | Q R P e r

  12. Pingback: Beating the POTA propagation blues at Stonelick State Park! | Q R P e r

  13. Pingback: QRP POTA with Friends: Two Park Activations with VE6LK, NJ7V, WD8RIF, and KD8KNC! | Q R P e r

  14. Pingback: Tu-Endie-Wei State Park: Low-impact QRP fun and one speedy P2P confirmation! | Q R P e r

  15. Pingback: Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation | Q R P e r

  16. Pingback: Propagation changes make for a relaxed 17 meter POTA activation at Pilot Mountain State Park | Q R P e r

  17. Pingback: Gazebo Portable! A quick hike and speedy QRP POTA activation with the Elecraft KX2 and a 28.5′ random wire | Q R P e r

  18. Pingback: A QRP SSB POTA activation using only the Elecraft KX2’s internal microphone! | Q R P e r

  19. Pingback: Pairing the Elecraft KX2 and AX1 with a little QRP Coffee for some proper portable POTA fun! | Q R P e r

  20. Pingback: Pairing the Elecraft KX2 and Chelegance MC-750 for a quick QRP POTA activation | Q R P e r

  21. Pingback: Field Report: QRP SOTA and POTA on Big Cedar and Black Mountain in North Georgia | Q R P e r

  22. Pingback: Spring Flashback: Pairing the Elecraft KX2 and Chameleon MPAS Lite at New River State Park | Q R P e r

  23. Pingback: Biplanes, Canoes, Callsigns, and POTA: Looking back on our summer in Canada and final field report from Québec | Q R P e r

  24. Pingback: Activating Plaines d’Abraham in Old Québec with the KX2 and AX1 combo | Q R P e r

  25. Pingback: Fickle weather during an early morning activation at Parc de la Rivière-du-Moulin, Saguenay | Q R P e r

  26. Pingback: An Urban POTA ATNO at Boisé de Marly Provincial Park | Q R P e r

  27. Pingback: Side trail POTA ATNO at Boisé des Compagnons-de-Cartier in Québec City | Q R P e r

  28. Allan Copland

    I have radio no 402 and I have *very* mixed feelings about this radio. I do rather like the RF performance (apart from the LO leakage back into the antenna), and the digital filtering is excellent. Where the KX2 fails for me as a trail radio is that it has more holes for rain to get in than does a Swiss cheese. I don’t see any practical value at all in that huge orange display and it’s cheap perspex cover that lets in water and dirt, but most of all, I loathe the ‘ergonomics’ and dirt cheap plastic control knobs Elecraft used, so for me, it has just become a second shack radio. I live in Scotland where it rains quite a lot and I just wouldn’t take the KX2 outdoors. Don’t get me wrong, the RF performance is adequate but it is not a practical trail radio unless you live in a warm sunny country. At least I have an FT817ND, which although an inferior performer, RF wise, has a nice faux leather sleeve to keep it dry in the Scottish summer and while it has a small LCD display, I find it more than fit for purpose.

    Reply
    1. Thomas Post author

      Yeah–neither of the KX rigs are designed for wet environments. I’ve had both the KX3 and KX2 in the rain and operated a number of times (during NPOTA) but always somewhere covered–even from just inside my truck.

      I don’t know of a proper weatherized HF rig. I think there would be a market for such an animal, but likely the costs would be quite high. A radio manufacturer once told me that proper weatherization can increase the price way beyond what the average ham radio operator would pay–it’s a rather expensive design challenge. He used to design HF pack radios for the military so was in the know.

      Reply
  29. Evan Deutsch

    I took my recently purchased KX2 on vacation with me last week, operating from my cabin in northern Michigan. Really fun making DX contacts with a few watts. Thomas, you said this rig is not suitable as a base radio. Allow me to disagree. I have been using it in my shack since I got back. Another dimension to ham radio. Even with a modest dipole, not too tough making contacts into Europe, S. America, Cuba and Africa.

    Reply
    1. Thomas Post author

      Evan, I think I wasn’t clear in that claim. I meant that Elecraft designed this radio to be used in the field, not primarily as a base rig. It can absolutely be used as a base rig, though, and like you I’ve been doing so when I haven’t had it in the field bag. I recently purchased the KXPA100 and it pairs seamlessly with the KX2 as well.

      In short: the KX2 is my favorite of all of the transceivers I’ve ever owned! 🙂 Glad you’re enjoying this little marvel!

      Thomas

      Reply
  30. Dave

    U people in america are so lucky in england the elecraft kx3 costs one thousand one hundred and forty five pounds and elecraft kx2 costs eight hundred and ninety nine pounds the a.t.u is two hundred and forty three pounds the cw key one hundred and fifty nine pounds battery and charger for kx2 one hundred and ten pounds

    Reply
    1. Thomas Post author

      You know, Dave, it might pay off to a make a pilgrimage to the States to gather your Elecraft kit!

      I feel your pain. When I lived in the UK, I quickly realized what a bargain ham equipment was in the US–at least those items either made in the US or by one of the big three.

      -Thomas

      Reply
  31. Doug Turnbull

    Dear OMs,
    Removing the battery for charging is nothing. If you wish just keep the battery external for that matter. I far prefer to open the KX2 and remove the battery than take all eight cells out of the KX3 and from what I can see the KX2 is more robust for this process as you only have the speaker wire to concern yourself with the KX3 has a ribbon cable and speaker wire and is from my point of view more vulnerable

    If this is going to be your base station then get the KX3 but for travel the KX2 gets my vote and I have both radios. Such a wee radio with a great display and incredible functionality. Okay no TB and no 6M but it is hard to put 160M antennas up while in a hotel room and well Six would be nice though I do not operate on the magic band that often.

    I suggest that a magnetic loop such as the AlexLoop makes a good companion antenna. It is easy to install on a balcony or roof top sun deck. A broom handle for a mast and you can strap it to a park bench.

    I like the KX3 but am in love with the KX2. Base station is a loaded K3 and amplifier for DX and contests but it is fun to have a couple of hours operating in another country – the KX2 does this.

    73 Doug EI2CN

    Reply
  32. Joe

    Good, thorough review – with the exception of one area pretty essential to QRP (my biased opinion, of course 😉 -what about digital modes? If you could post-script with a quick usage of, say, an android tablet or HRD in combination with the KX2, that would be greatly appreciated!

    de N0LSD

    Reply
    1. Thomas Post author

      You know, that’s a good point. I actually need to test the KX2 and LD-11 on the digi modes. Need to get a new sound card interface first, though. Perhaps a SignaLink USB.

      Cheers,
      Thomas
      K4SWL

      Reply
  33. Cap

    I thought long and hard about purchasing a KX2 and held off as I thought the price difference between it and the KX3 was not enough to justify buying it and I really wanted I/Q out. That said, if I needed a light portable HF CW transceiver with good battery life I would no doubt buy the KX2, but the revelation of having to remove the battery to charge it resulted in me picking my jaw up off the floor.

    Reply
    1. Thomas Post author

      Honestly, Cap. The KX2 is a field machine!

      The KX3 is the best of both worlds. If you do the occasional–or even very frequent field operation–the KX3 will serve you brilliantly there and in the shack. It’s a Swiss Army Knife of a transceiver.

      The KX2? It’s a smaller Swiss Army Knife. One that fits in your pocket and you don’t even feel it there. One you carry with you everywhere.

      Both are fantastic transceivers. If I could only get one, and I knew I’d mostly use it in the shack? I’d get the KX3.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.