ADS-B for SDRplay RSP1 and RSP2 now available

I was very happy to see the following message from Jon Hudson at SDRplay this morning:

“ADS-B for both RSP1 and RSP2 is now available for the Raspberry Pi 2 & 3 – you can get the software from downloads – http://www.sdrplay.com/downloads

If you are an RSP2 user, make sure you use Antenna Port B when running ADS-B.”

This is great news as I’ve had a number of readers ask if the RSP series SDR was compatible with the DUMP1090 ADS-B system.

The SDRplay RSP2

If you have an RSP1 or RSP2 and either a Raspberry Pi 2 or Pi 3, this will be an easy, accessible way to experiment with ADS-B.

In the long run, however, I’d never devote an RSP as a dedicated ADS-B feeder. Why? The RSP is a very versatile, full-featured SDR and I wouldn’t want to tie it up with such a relatively routine, simple task.

Instead, I’d give ADS-B a try with the RSP, and if I liked it, I’d purchase this inexpensive FlightAware RTL-SDR dongle with a built-in 1090 MHz bandpass filter for $18.95.

Click here to read my recent article about setting up a FlightAware ADS-B feeder.

I’m always so happy to see such active application development from “Mom and Pop” companies like SDRplay and AirSpy. Just more ways to put your SDR to work for you!

Spread the radio love

3 thoughts on “ADS-B for SDRplay RSP1 and RSP2 now available

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.