Category Archives: Radios

PSA: Your (new) radio’s filters may be wider than you think

AM bandwidth confusion: IF Filters today vs. yesterday

by 13dka

Whether or not a radio is a joy to listen to, or apt for difficult DX is decided to a large part by the last IF filter stage. Most radios of the past didn’t come with many IF filters to begin with, their quality varied a lot and harsh compromises had to be made in multi-purpose radios. With the advent of digital filtering and inexpensive DSP portables, we got spoiled by a rich choice of selectivity settings that came with an idiosyncrasy I had to wrap my head around first, namely a shift in how some (digital) filters are labeled now.

Continue reading

Spread the radio love
RF75A Radio

Raddy RF75A Review – Pocket Radio with Interesting Bells and Whistles

Radioddity Raddy RF75A

By Robert Gulley K4PKM

The RF75A is an interesting little radio which (currently) retails on Amazon for ~$53.00 in the States. It can also be purchased via Radioddity directly for $53–if you use this referral code, you can save $15 off a $65 purchase.

Before we get into specifics, two things are worth mentioning right off:

  1. I was asked if I would be interested in reviewing this radio by our fearless shortwave listening leader, Thomas, and the copy I have was provided to me at no cost by Radioddity directly. (I have no other affiliation with them, but have recently purchased a GMRS mobile radio from them which I am looking forward to using when I finish my review of the RF75A.)
  2. This is, as you will see from the photos I am including, a pocket radio, not to be confused with a tabletop radio or a small portable radio such as the CCRadio Skywave or similar radio. I mention this because invariably there will be folks who expect tabletop or portable quality from a radio about the size of a playing card. It is not going to happen!

Having those thoughts out of the way, the quick and dirty answer as to the quality of the radio is, I am impressed. For those who have not read anything related to my past experience with radios, I have been a shortwave listener since I was about 10 years old, and now in my early sixties. So, I have seen a fair number of radios in my time (speaking as an old codger, or is that curmudgeon?) and have even moved with the times to incorporate SDRs into my radio arsenal.

Each style of radio has its place, and a pocket radio is designed to be the ultimate in portability and space savings. As light as this shirt pocket radio is, it still manages to feel reasonably solid, and of course, it could be packed into anything one was taking along for a trip.

Size Comparison with Playing Card and Cell Phone Battery

The radio measures 2.5″ x 3.5″ x 1″. Playing card and cell phone battery for comparison.

Here are some specs from the manufacturer’s website (saving you my long-winded descriptions!):

  • APP Control SW Radio: Thanks to the app intelligent remote control and Bluetooth 5.0 features, you can enjoy the convenience of RF75A. With its intuitive user interface and powerful wireless capabilities, you can easily control your radio from your devices (support iOS, Android, and HarmonyOS systems).
  • Wider Reception Range: Listen to FM, VHF, AM, SW, and WB, and stay up-to-date with your favorite radio shows and music with this powerful multi-band receiver. RF75A has a wider range of shortwave frequencies compared to the RF750.
  • Automatic Scan and Manual Storage: You can save up to 396 stations, so you can easily access your favorite stations. Experience powerful sound and crystal-clear reception with its 9.85′ wire antenna.
  • Personal Music Player: Boost your music experience with this all-in-one outdoor audio system. With Bluetooth 5.0 feature, a 3.5mm earphone socket, and a TF card socket, you can easily connect to your personal audio devices and connect to your computer as a speaker.
  • Outdoor Companion: This one-of-a-kind radio is designed to be small and lightweight, making it ideal for travel and outdoor activities. Use the flashlight and SOS for emergencies.

What’s in the box?

  • 1 x Raddy RF75A
  • 1 x Storage bag
  • 1 x Lanyard
  • 1 x Wire antenna
  • 1 x Type-C charging cable
  • 1 x Earphone

Reception

I always like to start a radio review by either listening to AM stations first, or WWV time stations for checking out shortwave reception. In this instance I started listening to AM stations in the daytime to see what I could hear on a typical day (no storms nearby, early spring, etc.).

Living in a fairly remote area I was surprised it captured as many stations as it did, making me think the ferrite bar inside must designed well for such a small radio. Evening and nighttime listening brought in many of the usual stations with which we are familiar, particularly the so-called Clear Channel stations. What was more impressive were the many small stations I was able to pick up, not only at night, but early in the morning around 8 a.m.

Ferrite Bar- Front View

Surprisingly effective Ferrite Bar

Ferrite Bar Side view

Side vide showing the magnetic wire wrap

One in particular caught my attention as I am quite certain I have never captured them before, was WHKY 1290, Hickory North Carolina. That’s a distance of about 285 miles, received in the morning. I am only about 50 miles from Cincinnati and cannot receive some of their smaller stations on any radio! Color me impressed!

Nighttime brought stations in from several thousand miles, as you would expect, yet I was likewise impressed with this little radio’s capabilities on AM.

FM

I confess to not being much of an FM listener, but I did tune around the band for FM stations to test its ability to “lock on” to signals (as indicated by a tiny red light) and to pick up stations from quite a good distance away with clarity and good sound.

This might be a good time to mention the quality of sound from the small 3 Watt(!) speaker and bass boost from the back. Again, this is not my Sangean 909 X2 with a large speaker, nor my CC Radio EP, but it has rather amazing clarity and volume capability for such a small radio. I cranked the volume up quite high with no distortion, and even though the speaker is small, the bass boost seems to round out the sound quite nicely, avoiding some of tinny sounding speakers common in such a small radio.

Weather

The radio has coverage of the NOAA weather radio stations and it surprised me with being able to receive 4-5 stations, more than I have gotten with most other radios. All but one of the signals were crystal clear, with the fifth having some noise, but still quite intelligible.

Air Band

This radio includes the air band frequencies and amateur 2-meter frequencies (30.000-199.975 MHZ). I am usually able to receive some signals, but I am quite far away from any local airports or repeaters, so my main reception is from CVG, Greater Cincinnati Airport. While the radio scans the air band frequencies, like any other radio, it is best to find local frequencies you want to hear and program them into memory so you are not wasting a lot of time scanning dead air (these are country specific). Likewise amateur repeaters or GMRS, marine, or public service channels would be best used in memory channels except when scanning for new frequencies.

SWL

Shortwave listening is very respectable, with frequency ranges between 4.750-21.850 MHz (it does not have SSB capability). Tuning can be accomplished by pressing and holding one of the directional tuning keys for about 2 seconds, a long press scans faster. A single press of either directional button will move the frequency increment based on the band/mode chosen.

The radio also features something I have come to really like: a pause button which works not only in music mode, but also when receiving regular radio signals, activated by a quick press of the power button. The frequency is held while pause is active, and then releasing the pause with a second quick press of the power button resumes with all your setting still active.

When comparing this with another radio it was particularly useful instead of having to turn the volume down like most radios. This feature is also nice for answering a call or other interruption, and you resume right where you left off.

Sound Effects, TF Card, Audio in, Bluetooth Usage and other Errata

I have not covered these features as they do not impact radio reception, but I mention them just for completeness. All of these features are available and can be read about in the user’s manual. I will mention the flashlight feature and the emergency siren features, as these are useful for portable operation. The light is quite bright, and the siren will hurt your ears if you trip it accidentally, especially more than once. Ask me how I know!

There is a sleep timer as well as an alarm clock function, with the sleep timer adjustable by default starting at 90 minutes. Most buttons have multiple functions depending on the mode employed, so reading the manual is important for some of these features. I was able to get up and running without reading the manual initially, but some features were functional only in certain modes, so eventually you will need the manual which can be downloaded from the Radioddity site.

The App

A bit of a novelty in this size and type of radio is the Apple/Android app available to control radio functions remotely through Bluetooth connectivity. I have to say, on Android at least, the app is beautiful and I wish more apps used such a clear color scheme and large controls. Your mileage may vary based on your preferences, but I like it!

Phone App on Android

The free Phone app on an Android phone. I like the crisp, clear layout and colors, and the intuitive design.

As to function, the app gives you more information than the radio screen, such as the Bandwidth, SNR, received signal strength and the volume setting in one display. As a side note, the radio can still be adjusted at the radio, and then changes are reflected in the app almost instantaneously.

Of course, the main use for the app is to operate remotely, and the controls are easy to use, including, most importantly, direct keyboard entry of frequencies! This is always the biggest drawback to small radios without a keypad. There are instructions for using the app, but for the most part the app is laid out so well you can control the radio pretty much intuitively.

Negatives –

Yep, there are a few. When tuning with a single press each time there is some soft muting – fortunately it does not last long, but it is there. The buttons also make a clicking sound, not too loud, but it is there. If something like that annoys you, be aware all the buttons make a mechanical click.

I have noticed on several occasions that the band/mode button may stick slightly and take you past where you want to go. Not a big problem, but it does happen now and again. Of course, this could just be my unit.

Also, naturally, the buttons are small. And while I did not have much of an issue even with fairly large fingers, there were times when I pressed the desired button but also hit the one below it. Not a problem for me, but again, if you have very large fingers you may find the radio a bit tricky to navigate in some places. (This only happened on the front buttons for me, the tuning buttons are adequately spaced for most anyone I think.)

The telescoping antenna is probably the weakest point on the radio – similar to most radios, really. It is thin and could be bent easily. I had no difficulties, but I always took care to raise it gently and watched where I was moving the radio around. Then again, I do that will all my radios with telescoping antennas. Just a heads-up to be careful.

Concluding Thoughts

I like this little radio, and will probably keep it in my car for those times when I might want to listen to the radio out and about, check the NOAA weather forecast, use the flashlight, or (hopefully never need) to use the siren. The battery seems to last a long time on a charge when using the radio – I cannot speak to the MP3 drain or a prolonged flashlight/siren drain, but under normal use it seems excellent. It uses a USB-C connection like my phone, so charging is not an issue for me. It will almost fully charge in an hour; the instructions say 2 hours.

Pocket radios certainly have their niche, and I think this one does quite well in that role. If you are in the market for such a radio, I think you will be pleased, especially for the price and the addition of the free remote-control app. 73!

Click here to check out the Raddy RF75A at Radioddity.

Click here to check it out on Amazon.com (affiliate link).

Spread the radio love

Comparing the Watkins-Johnson WJ-8711 & WJ-8712 with TEN-TEC RX-340 & RX-331 receivers

Many thanks to SWLing Post contributor, Paolo Viappiani, who shares the following guest post:


The WJ-8711 & WJ-8712 vs. Ten-Tec RX-340 & RX-331 Receivers

by Paolo Viappiani, Carrara, Italy

In recent years, a renewed interest has grown in regards to the best HF receivers using “first generation” DSPs, typically the HF-1000/HF-1000A, WJ-8711/WJ-8711A and WJ-8712 models by Watkins-Johnson and the RX-340 and RX-331 models by Ten-Tec. Even today, the aforementioned receivers are considered among the best performers of all times; this is a well-deserved fame in the case of the W-Js, a bit less with regard to the units manufactured by Ten-Tec, a firm that once had a good reputation but that has been recently acquired by a new owner (who sold the old facilities by transferring the company and distorting the sales, support and assistance policies of the previous company [2]). I therefore believe that this article serves as a dutiful information for the readers who are potentially interested in these receivers.

A Bit of History

In the years between the last and the present century, two receivers very similar to each other in terms of design and structure were released almost simultaneously by Watkins-Johnson of Gaithersburg, Maryland [1] and by Ten-Tec of Sevierville, Tennessee [2]: the WJ-8711 (later upgraded to the A and A-3 versions and followed for a short period by the HF1000 and the  HF1000A  “civilian” versions [3]) and the Ten-Tec RX-340; both of them are shown in Figure 1.

Figure 1: The WJ-8711A (above) and Ten-Tec RX-340 (below). Notice the similarity of the front panels of the two radios.

The WJ-8712/WJ-8712A and the Ten-Tec RX-331 receivers were released by their respective manufacturers in that period also (the latter one was preceded by the RX-320 and RX-330 models). All these types were nothing more than “black-box” units, that in all respects corresponded to the WJ-8711A and to the Ten-Tec RX-340 receivers but that had not been provided with true front panels, as they were controlled by special hardware interfaces or from a PC, look at Figures 2 and 3.

Looking at the appearance of the WJ-8711/HF1000 receiver series and of the Ten-Tec RX-340 units, a relative similarity to each other is evident, and it has led to various speculations regarding the design of both devices.

One of the theories was revealed by James (Jim) C. Garland W8ZR of Santa Fe, New Mexico [4], about which he claims to have obtained information from a Ten-Tec employee directly. James claims that in 1991 the US Government Agency NSA (National Security Agency), which used to purchase numerous HF receivers for surveillance and interception, decided that the current cost of the receivers were too high and formed a special group in order to study how to obtain a possible price reduction.

At that time the high-end HF receiver market was dominated by a few manufacturers: Watkins-Johnson, Racal, Cubic, Rockwell-Collins and a few others, and Ten-Tec applied for joining the group.

Figure 2: The WJ-8712A (above) and Ten-Tec RX-331 (below). While the Watkins-Johnson model is two rack units high and half wide, the Ten-Tec develops less in height (only one rack unit) and more in width (standard 19” rack). However, both receivers are quite deep (more than 20”-50 cm.).

Figure 3: The Tmate unit of the WoodBoxRadio is shown here; it is one of the possible accessories which, together with a PC monitor, allow using the “black-box” receivers via an RS-232 interface.

According to the information provided by Jim Garland, the Watkins-Johnson and the Ten-Tec designers worked together for about one year in order to agree on the technical characteristics and guidelines of the “radio of the future” which must meet all the requirements that the NSA requested.

Continue reading

Spread the radio love

Survey results: What type of radio is your daily driver?

Last week, I published a post asking SWLing Post readers what type of radio their “daily driver” is at present. Click here to read that post.

I created a survey form and left it open for about five days. In that time, we received 639 responses! If you’d like to read the results, continue scrolling or click on continue reading below.
Continue reading

Spread the radio love

Survey: What type of radio is your daily driver?

A little over a week ago, many of us participated in the 2023 Virtual Winter SWL Fest.

I enjoyed all of the presentations and the casual conversations many of us had in the hospitality lounge and various break-out rooms. Again, kudos to the Fest organizers and all of the volunteers who moderated the various rooms and forums–you all did an amazing job!

The one thing I always pick up when hanging with other radio enthusiasts is the type or class of radio they tend to operate the most.

Case in point: I noticed one friend is currently enamored with tube/valve radios–in past years he loved compact DSP portables. Another friend switched from using primarily a portable radio to a Drake R8 series tabletop radio.  I noticed that many others have been bitten the SDR bullet since last year.

Daily drivers

For many of us, the type of radio we use daily changes over time.

For example, when I first started listening to shortwave in my youth my daily driver was a portable radio. When I got my ham license I found that I enjoyed using my general coverage transceiver connected to a multi-band doublet. Later, with the advent of Software Defined Radios, I became an avid SDR enthusiast.

At present, I’m back to using general coverage transceivers (specifically, the Icom IC-705).

Of course, I always have portables and vintage radios on the air, but they’re not my primary, or “daily driver,” these days. 

Survey

I’m curious: what’s your daily driver?

I’ve created a short survey. If you’d like to participate, simply enter your answer in the form below, click the submit button and it will tally the results. Alternatively, you canclick on this link to open the survey form in a new tab/window. Of course, feel free to comment on this post as well! Thank you!

Spread the radio love

Radio Waves: Listeners Share LRA36 Recordings, CW Clock, Tabletop Radio, and Dropping AM in Cars

Radio Waves:  Stories Making Waves in the World of Radio

Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

Many thanks to SWLing Post contributors Adrian Korol, Richard Cuff, and Dennis Dura for the following tips:


Radio Nacional Arcangel San Gabriel picked up around the world (Radio Nacional)

Radio Nacional Arcangel San Gabriel broadcasts on the short wave on Wednesdays from 21 to 23 UTC and on Saturdays from 21 UTC until 03:00 on Sunday on frequency 15476 Khz (USB).

Due to improvements in the audio chain and transmission line and good propagation, we are receiving messages from listeners who had not been able to listen to it for decades and also reception reports from countries such as India, Iceland, Japan, United States, Spain, Italy, United Kingdom, Mexico, Chile, Brazil, Uruguay and all the National territory.

During the summer we broadcast a program called “Uniendo Voces”, a production of the Joint Antarctic Command, the University of Quilmes and RAE, with the presentation of Juan Carlos Benavente.

We also share with you videos and posts in which listeners from around the world share their reception of LRA36. [Continue reading…]

Morse Code Clock For Training Hams (Hackaday)

It might seem antiquated, but Morse code still has a number of advantages compared to other modes of communication, especially over radio waves. It’s low bandwidth compared to voice or even text, and can be discerned against background noise even at extremely low signal strengths. Not every regulatory agency requires amateur operators to learn Morse any more, but for those that do it can be a challenge, so [Cristiano Monteiro] built this clock to help get some practice.

The project is based around his favorite microcontroller, the PIC16F1827, and uses a DS1307 to keep track of time. A single RGB LED at the top of the project enclosure flashes the codes for hours in blue and minutes in red at the beginning of every minute, and in between flashes green for each second. [Continue reading…]

The Changing Face of Tabletop Radios (Radio World)

While some still offer OTA reception, the specialty segment is dominated by online connectivity

There was a time, of course, when radios were fixtures in people’s homes. But according to Edison Research’s “Infinite Dial 2022” report, the percentage of U.S. homes with “zero” radios inside went from 4% in 2008 to 39% in 2022.

Among the radios that remain, clock and emergency radios have the best chances of justifying their presence to internet-centric consumers. But good ol’ fashioned tabletop radios? AM/FM receivers housed in eye-appealing laminated wood cases with big speakers and hefty knobs?

Mass-market companies such as Panasonic and Sony have abandoned such products. But specialty/quality brands such as C. Crane, Grace Digital, Sangean and Tivoli Audio have not.

These brands bring fresh approaches to the tabletop radio segment through innovation and the harnessing of streaming technology. Still, it’s an uphill battle in a world obsessed with all things internet.

There are several reasons conventional AM/FM tabletop radios have been disappearing from homes.

The first and most obvious is that even by the beginning of this century, radio had long ceased being a destination medium around which the family gathered to listen. In recent decades, the more common uses were morning wakeups, rush-hour commutes, sports on the go and weather emergencies, all well-served by portable radios, though there was still some degree of at-home listening.  [Continue reading…]

Who Benefits By Removing AM From Cars? (Radio World)

Three perspectives on this hot potato threat

Car manufacturers claim they cannot suppress noise getting into the AM signals in their electric vehicles. This article presents the viewpoint of three people who beg to disagree.

Tom King, the chairman of Kintronic Labs Inc., is an expert on AM transmission and noise interference. His company manufactures most of the phasing cabinets for directional arrays on AM stations around the world. Continue reading

Spread the radio love

A “knobs and switches” oldster investigates the SDRplay RSPdx . . . Wow!

By Jock Elliott, KB2GOM

It is hard to imagine a less spectacular looking piece of radio gear than the SDRplay RSPdx. It is literally a black box. Aside from the printing on top of the box, the most exciting thing about the RSPdx are the two red plastic covers on the antenna connectors on the side. There are no switches, no knobs . . . you can’t do anything to it except connect an antenna (or antennas) on one side and a USB cable on the opposite.

But once you connect the USB cable to your laptop and fire up the SDRuno software (that you have previously downloaded and installed), you are now in command of a listening post that covers from 1 kHz to 2 GHz.

We’ll get to the important stuff in just a minute, but first a little background.

For an oldster retrocrank like me, a proper radio has knobs and switches . . . preferably a knob or switch for every job. Lately, however, I have noticed that a lot of DXers and ordinary listeners are reporting good success with SDRs – software-defined radios. So I started to wonder about them.

There are three elements to a software-defined radio like the SDRplay RSPdx:  the SDR box itself, which is the part of the system that actually receives the radio signals; a Windows computer (laptop or desktop), which provides the command and control for the SDR; and whatever antennas are required to receive the signals that the listener would like to hear. And, just to be absolutely clear, you need all three elements for the SDR system to work at all.

With my curiosity about SDRs rising, I inquired of Thomas, SWLing’s Maximum Leader, whether SDRplay – one of SWLing Post’s sponsors – might like me to take a look at one of their SDRs. Their answer was an emphatic Yes, and I had an RSPdx in my hands just a couple of days later at no cost to me or the SWLing Post.

I have to admit I had some trepidation about the process of bringing the RSPdx online because any time you have three different elements from three different sources that must work together for a system to function properly, there is always the possibility that some of the elements might not “play well together.”

Installation is easy and fast. Connect the RSPdx to the computer using a USB A-male to B-male cable (which the user must supply; often called a printer cable), then connect the antennas using the appropriate cable. In my case, I connected an MFJ 1886 Receive Loop to the Antenna C connector and an off-center fed dipole to the Antenna A connector.

To SDRplay’s great credit, they have produced an excellent video for first-timers and folks not familiar with SDRs — https://youtu.be/Oj_-dOLVzH8 . I recommend watching it, perhaps a couple of times, before you get started.

When you first fire up the SDRuno software, you will see the main panel:

Click on the “RX” button, and the Receive panel will be displayed. After you slide it over, it will look something like this:

Click on SP1 or SP2 in the main panel, and one of the peak displays will appear:

Finally, click on the PLAY button in the main panel, and whatever frequency you have selected will begin to play. Continue reading

Spread the radio love