Tecsun ICR-100 | The SWLing Post

Many thanks to SWLing Post contributor, Egil (LA2PJ), who writes:

Hi Thomas,

In the middle of march, Steve Allen (KZ4TN) posted this article showing a case for the BELKA-DX.

I found his idea so good that I ordered two of the small boxes, using the Amazon link given in his article.

The boxes arrived here in Norway just twelve days after ordering, and was delivered to my door by a local transporter.

Never before have I experienced that kind of service on any purchase via Amazon!

Tecsun ICR-100

While packing the BELKA-DX in one of the boxes, I discovered that my Tecsun ICR-100 speaker/audio recorder fit snugly in the other box. The two boxes also contains a six meters long wire antenna, charging cables for both units, earphones, and even an USB charger, just in case I get the opportunity to recharge the batteries.

Belka-DX and accessories

The attached pictures show my new setup. Two items are not shown in that picture: a wire antenna plus a 20Ah powerbank from Anderson. We are going to an off grid cabin for the Easter holidays, and hope that when leaving home with everything fully charged, the powerbank will keep this setup plus my smartphone happy for a whole week.

73s Egil – LA2PJ

Thank you so much for sharing this, Egil! It’s absolutely amazing that the shipping service to Norway was so efficient.

I think you’ll have no problem at all enjoying hours upon hours of DXing with the Belka-DX in your off-grid cabin. No doubt you’ll be escaping the RFI and enjoying much lower noise floors while on vacation–this will give you an opportunity to truly take advantage of the Belka-DX receiver. You’ll have to report back with your experience and photos (hint, hint!).

Spread the radio love

Many thanks to SWLing Post contributor, Paul Walker, who shares the following video and notes:

Here is a 10 minute narrated, detailed video on my 25 foot long by 10 foot tall “Volleyball Net” Loop antenna using a Wellbrook ALA100LN amp control head and antenna interface.

Click here to view on YouTube.

Great job, Paul!

I like how Paul is using the antenna space he has so effectively. Though he has no antenna restrictions, his mag loop can be deployed and taken down quite easily; it’s obviously serving him well on both the HF and mediumwave bands. As he mentions, it’ s also manually steerable.

Those of you with the Wellbrook ALA100LN amplifier might try building this loop as well.

I also like how Paul is using the Tecsun ICR-100 recorder. Not only does it provide an easy way to record line-in audio from his radio, but the built-in speaker serves as an excellent monitor. It’s pretty affordable, too.

I agree with Paul about the Emtech ZM-2 ATU: it’s an exceptional little tuner that can be used for both QRP and SWL applications. I recently purchased the ZM-2 after having borrowed one from my buddy Eric (WD8RIF). Great value, in my opinion.

Thanks again, Paul!

Post readers: If you have an antenna design you’d like to share, please comment or contact me.

Spread the radio love