Tecsun PL-680: Rolf touts enhanced performance using PL-660 mod

Many thanks to SWLing Post contributor, Rolf Snijder, who writes:

I have made the same modification to the Tecsun PL-680, that was done [by many on the] PL-660 earlier.

The PL-680 is now a great radio; I think now one of the best! I do not own a PL-660, so I cannot compare.

Photo detail

Overview of modification.

For disable soft mute you can see the 2 joints and you must scratch a path on the print near the switch. (same on a PL-660)

Closeup of joint #1 (click to enlarge)

Closeup of joint #2 (click to enlarge)

With the tone switch [on the left side panel of radio] you can turn the muting on and off. On FM I need to set it on for better results, but on LW MW and SW always off!

Frequency adjust is with the pot: adj1391 in the right corner. (for the 1 kHz off freq)

Click to enlarge.

Hope I can help someone with this on your great site.

Greetings,

Rolf Snijder
Netherlands

Many thanks for sharing this PL-680 mod, Rolf! This seems like a simple enough project and one that can be undone if you aren’t pleased with the results.

Post readers: Please comment if you’ve made this modification to your PL-680 or PL-660 or if you have other successful modifications to share!

Spread the radio love

4 thoughts on “Tecsun PL-680: Rolf touts enhanced performance using PL-660 mod

  1. Edward

    This mod is a good example of how marketeers seem to be drifting by their customers like ships in the night and not listening to them. I performed a similar mod on my realistic DX440. I don’t get it. Why do us customers have to do these hacks to our radios to get them to work the way we want them to?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.