Radio SE-TA 2 to begin broadcasting on September 1st, 2020

Many thanks to SWLing Post contributor, Harald (DL1AX), who shares the following announcement from Radio SE-TA 2:

RADIO SE-TA 2 will start broadcasting on September 1st, 2020 via our own transmitter in Hartenstein (Saxony), Germany.

There will be a one-hour opening broadcast on the frequency of 6115 kHz from 10:00 UTC (12.00 CEST). In the evening, this one will be repeated again from 18.00 UTC (20.00 CEST).

With these transmissions reception conditions will be tested. But it will also be about program content topics at RADIO SE-TA 2, some of which have already been scheduled and others that are still being planned.

In the future, regular broadcasts are planned via our one transmitter according to a broadcast scheme, which we will inform you about in due course.

Our quarterly broadcasts continue to be aired on the 1st Saturday in the new quarter via the facilities of MEDIA BROADCAST in Nauen on 6095 kHz with a radiation power of 125 KW.

Transmissions are already booked as follows:

  • 03.10.2020 – 10.00-12.00 UTC (= 12.00-14.00 CEST) – special length!
  • 02.01.2021 – 11.00-12.00 UTC (= 12.00-13.00 CET)
  • 03.04.2021 – 10.00-11.00 UTC (= 12.00-13.00 CEST)

Your letters with comments, criticisms, music requests and reception reports are welcome to: [email protected]

Yours sincerely
Christoph
Radio SE-TA 2

Spread the radio love

August 28 test of 9670; FTIOM & UBMP August 30-September 5

There will be a special test of FTIOM and UBMP on 9760 kHz (Channel 292 from Germany) on August 28 from 1600-1800 UTC.

From the Isle of Music, August 30 to September 5:
This week, we present a potpourri of various styles of Cuban music.
The broadcasts take place:
1. For Eastern Europe but audible well beyond the target area in most of the Eastern Hemisphere (including parts of East Asia and Oceania) with 100Kw, Sunday 1500-1600 UTC on SpaceLine, 9400 KHz, from Sofia, Bulgaria (1800-1900 MSK)
2. For the Americas and parts of Europe, Tuesday 0000-0100 on WBCQ, 7490 kHz from Monticello, ME, USA (Monday 8-9PM EDT in the US).
3 & 4. For Europe and sometimes beyond, Tuesday 1900-2000 UTC and Saturday 1200-1300 UTC on Channel 292, 6070 kHz from Rohrbach, Germany.
5. NEW: For Europe and possibly beyond, Saturday 0800-0900 UTC (1000-1100 CEST) on Channel 292, 9670 kHz from Rohrbach, Germany.
Our Facebook page is https://www.facebook.com/fromtheisleofmusic/
Our V-Kontakte page is https://vk.com/fromtheisleofmusic
Our Patreon page is https://www.patreon.com/tilford

Uncle Bill’s Melting Pot, August 30, September 1 and 5:
Episode 180 presents various styles of music by Chicago-based bands.
The transmissions take place:
1.Sunday 2200-2300 (6:00PM -7:00PM EDT) on WBCQ The Planet 7490 kHz from the US to the Americas and parts of Europe
2. Tuesday 2000-2100 UTC on Channel 292, 6070 kHz from Rohrbach, Germany for Europe.. NEW SATURDAY TEST 0900-1000 UTC (1100-1200 MESZ) on Channel 292, 9670 kHz from Rohrbach, Germany for Europe and beyond.
If you don’t have a shortwave radio or are out of range, you can listen live to an uplink from different web SDRs in Europe
Our Facebook page is https://www.facebook.com/UncleBillsMeltingPot/
Our V-Kontakte page is https://vk.com/fromtheisleofmusic
Our Patreon page is https://www.patreon.com/tilford

Spread the radio love

Tecsun PL-990x Initial Assessment

SWLing Post contributor, Dan Robinson, and I have been evaluating a pre-production model of the Tecsun PL-990x portable shortwave radio–the same model which will be soon sold by Anon-Co.

Dan has just completed his initial assessment and included a long-format video. Many thanks to Dan for sharing the following:


Tecsun PL-990x:  An Initial Assessment

by Dan Robinson

Recently, Thomas Witherspoon posted the first photos of the Tecsun PL-990x – we both received units from Anon-co in Hong Kong for testing.

I was able to spend some time outside my house here in Maryland, running the 990x and comparing it to the older receiver by Tecsun, the PL-880.

Tecsun undertook a thorough re-design of the PL-880, which among other things was known for its superb sound through a large speaker.

The 880 was available both on its own, or in a hard-case kit that also included (or includes assuming these are still purchasable) a separate Tecsun-branded solid state recording device, spare knobs and other accessories including Li-ion batteries.

So, the long-awaited PL-990, which we have been seeing in YouTube videos being tested by various individuals who purchased pre-production versions from Asian sites such as AliExpress, is finally here – or will be in coming weeks and months.

Those who view my videos know that I like to do fairly long hands-on tests of receivers, and this is no exception, at about 50 minutes.  My test did not include medium wave or FM, focusing only on shortwave performance and using only the telescopic whip antenna.

Throughout the video, I do put the 990x up against the older PL-880, which had the well-known issue of poorly-implemented synchronous detection (SYNC was not an official feature in the older receiver).

IMPORTANT NOTE:   On the 990x, hitting the “4” key while the radio is powered on activates DNR (Dynamic Noise Reduction) which then activates auto-bandwidth switching, a feature I found quite annoying in the PL-880 and would no doubt find just as annoying in the 990x.  I can’t imagine why anyone would want bandwidths auto-switching on their own.

I always tell people who come to me for advice about radios that you don’t always have to have the latest receiver to enjoy what’s left of shortwave.

I am a big fan of classic older portables such as the SONY ICF SW55s, 7600GRs, SW100s, SW-07s, SW-1000Ts, SW-77s, etc along with other classics such as the Panasonic RF-B65.  I own one or more of most of these – they’re a joy to use assuming they are in good condition.

One more thing – I did not compare the 990x to the Tecsun S-8800.  I think they are really different radios – the 8800 has that gorgeous remote control and fantastic audio . . . I really don’t put it in the same category as the 880/990s or even the 600 series Tecsuns.

I will leave extensive tests of the 990x on medium wave and FM to others – there are already quite a few YouTube demonstrations online showing this.  In the tuning I did on MW and FM, the radio did seem quite sensitive.  I noted that whereas the 9 kHz bandwidth is not visible on shortwave, it is on MW.

Here is my list of high points and low points for the 990x.  Since this receiver, and the still-to-be-released H-501, may in fact be the last we will ever see from Tecsun, it’s up to the individual to make a judgment as to whether to buy.

PL-990x High Points

  • A thorough physical re-design of the old PL-880
  • Tecsun has mostly fixed the problem with synchronous mode which is now a regular as opposed to a hidden feature.
  • Selectivity options are still excellent.
  • Calibration function retained (but see below)
  • Audio is fairly full and powerful.
  • Sensitivity seems good
  • Tecsun has added mp3 play capability and a microSD slot
  • Tecsun has added bluetooth capability (NOTE:  This is activated by pressing the RADIO/MP3 key in powered off state, and then toggling Bluetooth on or off with the PLAY/PAUSE button).
  • Tuning and other knobs remain of high quality as on the PL-880
  • Bandwidths given their own separate buttons
  • Line out retained and hidden feature can adjust line out level
  • Claimed “Triple Conversion” in AM mode
  • Timer functions
  • ATS (automatic station tuning) retained
  • Nice faux-leather case retained

PL-990x negatives:

  • Re-design appears to have come at expense of speaker real estate.
  • Synchronous mode improved, but there still seems to be some distortion which is more noticeable on some frequencies and in some reception situations than others.
  • PL-880’s wide AM bandwidth of 9 kHz is no more at least on SW, but it does appear when using MW.
  • Sensitivity seems good BUT in some situations, PL-880 sounded better and seemed to bring in stations better
  • MicroSD capability does not provide recording from broadcasts (likely due to copyright issues)
  • Method for re-calibrating radio is puzzling – more information needed on this
  • Birdies are present
  • Top element of telescopic antenna is VERY thin, vulnerable to bending and breaking
  • Number keys seem to be not as good as they could be – the white paint on the keys is certain to fade over time.  On my test unit part of the “W” on the MW/LW key was already beginning to disappear.

Selectivity comparison of the PL-990x and PL-880

PL-990x

Selectivity Options on SW:

2.3, 3.5, 5.0, 6.0

Selectivity Options LSB/USB:

0.5, 1.2, 2.3, 3.0, 4.0

Selectivity Options LW/MW:

2.3, 3.5, 5.0, 9.0

PL-880

Selectivity Options SW/LW/MW:

2.3, 3.5, 5, 9

Selectivity Options LW/MW:

0.5, 1.2, 2.3, 3.0, 4.0

Video


Many thanks, Dan, for sharing your initial review with us. As always, your expertise as an experienced DXer is incredibly valuable. 

I’ve tested every function on the PL-990 save some of the hidden features (yes, there will be hidden features). Dan and I are both trying to sort out the calibration sequence so that when these units hit the market, there’ll be a documented procedure in place. 

We’ve been comparing notes along the way and are in agreement on all of the major points with this radio. Still more testing to do, but updated with be posted here with the tag: Tecsun PL-990x


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Listening to the Hurricane Watch Net on shortwave

As Hurricane Laura starts to make landfall this evening (Wednesday, August 26, 2020), it is expected to be a category four hurricane—producing extreme winds, life-threatening storm surge and flash flooding.

This has been an active and early tropical storm season here in North America and September may produce even more named systems.

A few readers have asked about frequencies to monitor the HWN, so I thought I’d share this short primer.

Hurricane Watch Net (HWN)

hwn-hurricane-watch-netThe Hurricane Watch Net is a group of amateur radio operators who are trained and organized “to provide essential communications support to the National Hurricane Center during times of Hurricane emergencies.” The HWN focuses on “ground truth” observations (much like SkyWarn nets).

The Hurricane Watch Net is activated when a hurricane is within 300 statute miles of expected land-fall. The HWN covers the Caribbean, Central America, Eastern Mexico, Eastern Canada, and all US Coastal States.

The HWN operates in both English and Spanish, and is active on 14.325 MHz (upper sideband) during the day and 7.268 MHz (lower sideband) at night. The HWN is known to operate on both frequencies if propagation allows.

The HWN provides updates on their website regarding activation times and frequencies. As an example, here’s the latest for Hurricane Laura:

The Hurricane Watch Net will activate Wednesday morning at 8:00 AM CDT (1300 UTC) on our primary frequency of 14.325.00 MHz. Beginning at 4:00 PM CDT (2100 UTC), we will begin simultaneous operations on 7.268.00 MHz. Once activated, we will remain in continuous operation on both frequencies until the bands close. We will resume operations on those bands just as soon as propagation returns.

Please keep HWN frequencies clear

If you’re an amateur radio operator, please avoid using 14.325 MHz and 7.268 MHz anytime the HWN has been activated.

Monitoring hurricane frequencies

If you have a shortwave radio with a BFO/SSB mode, or a ham radio transceiver–and you live within the propagation footprint–you can monitor the Hurricane Watch Net.

Note that you’ll need to use upper sideband on 14.325 MHz and lower sideband on 7.268 MHz.

You can also monitor the Hurricane Watch Net via a number of WebSDRs on the KiwiSDR network and even potentially via the U Twente WebSDR in the Netherlands if propagation is favorable (although a WebSDR in North America would be preferable).

Click here to view the Hurricane Watch Net website.

If you live in an area prone to hurricanes, tropical storms and other natural disasters, please keep an emergency kit fully-stocked and at the ready. Click here for some ideas about building your own simple kit.

Spread the radio love

Listening to shortwave broadcasts with the lab599 Discovery TX-500

The lab599 TX-500 Discovery is a general coverage transceiver with AM mode, which means it can do double-duty as a shortwave receiver.

If you’ve been following previous TX-500 posts, you’ve seen me take this near military-grade portable transceiver to the field. I’ve activated a total of 6 parks in 6 days with it and it’s been a load of fun.

At home, I’ve also been doing a fair amount of SWLing with it in the evenings. I have a pre-production model that doesn’t include all of the accessories that will be provided with the production model. I don’t have a good way to port the audio out of the transceiver for recording at present, but I have been listening to broadcasts in the shack using a simple battery-powered amplified speaker.

I made a short video demonstrating the shortwave listening experience with the TX-500. It’s not a deep-dive by any means, but I thought it might provide a little more context. Keep in mind, I recorded this with my iPad, so the audio is far from ideal.

In general, the TX-500 is a fine radio for shortwave radio listening. It has the sensitivity and selectivity even a demanding DXer would seek. The TX-500 has a very low noise floor and an effective RF gain for mitigating summer QRN (static crashes) here in North America. I wish I had the time to tinker with the audio and see what sort of fidelity is possible. I’m not sure I’ll have time to cobble together a connection to my station monitors before I need to send it on.

Speaking of which, I’ll be sending this TX-500 to Ham Radio Outlet within the next two days. If you have any questions about it, feel free to ask now!

I will write-up a comprehensive review of the TX-500 in the October issue of The Spectrum Monitor magazine (my IQ32 overview is in the September issue).


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Phillip loves the Icom IC-R30, but frustrated with mono audio out

Many thanks to SWLing Post contributor, Phillip Novak, who writes:

A question or perhaps comment on the Icom IC-R30 that I’m hoping SWLing Post readers might shed some light on.

I’m a very new and extremely pleased owner of one of these units for the past 2 weeks. Aside from receive capability, usability is a big deal for me and this thing has proven to be a joy! The menus, buttons and build quality just feel great and frankly, I’m pretty happy about having made the “investment”.

So, it was with great excitement that my wife and I have the week off at the cottage – more so for me, as I was looking to really break the R30 in while sitting on the lake shore.

And then …. I was extremely disappointed to find out that the r30 headphone jack is mono (just like the IC-R6 that I already owned). On top of that, the jack is slightly recessed into the body of the unit, which renders the mono-to-stereo split adapter useless! (I really thought they would have changed it!)

Someone, please enlighten me as to why Icom would choose a mono plug!

It’s funny you mention the recessed plug as I had the same issue with a portable recently–the audio out port was recessed to the point that only the provided cheap earphones would fit!

Perhaps SWLing Post readers and IC-R30 owners can provide you with a simple solution? Of course, you can always purchase or build a mono-to-stereo adapter or patch cord–one with a slim profile to fit in the IC-R30 audio port recess (that’s the tough part, of course). But perhaps there are even earphones that have this functionality built-in? I honestly don’t know. Any ideas, readers? Please comment.

And, Phillip, we’d welcome your review of the IC-R30!

Spread the radio love

Two September Special Simulcasts on Channel 292 and WBCQ



Both WBCQ The Planet and Radio Channel 292 will be presenting special simulcasts featuring multiple music and variety programs in September, both with time donated by the stations:

I.       Showcase 292 will air with time donated by the station on Radio Channel 292 from Rohrbach, Germany on September 7 from 2100 to 2200 UTC on 3955, 6070 and 9670 kHz.  This is Channel 292’s first collaborative simulcast featuring five music and variety programs that appear on its weekly schedule – Alt Universe Top 40 (rock), Encore (classical music), From the Isle of Music (Cuban music), Uncle Bill’s Melting Pot (world and novelty music) and the Voice of the Report of the Week (listener request music plus commentary).  3955 and 9670 are both new frequencies,  and listeners are encouraged to try them as a DX catch  in eastern Canada and the eastern US.  A special eQSL will be available from the producer (details will be given during the broadcast).  6070 kHz will of course not be receivable in Canada due to CFRX on the same frequency.
II.  WBCQ The Planet from Monticello, Maine, USA continues its popular simulcast series with time donated by Allan and Angela Weiner with    WBCQ Works! on September 7 from 10pm to 11pm EDT (0200-0300 UTC September 8) on 5130, 6160 and 7490 kHz with five of its popular regular music offerings – Area 51, beHAVior night, the Lost Discs Radio Show, Marion’s Attic and Uncle Bill’s Melting Pot.   In another recent broadcast, 6160 was heard as far as Western Russia and may be listenable  throughout most of Canada away from the NE.   5130 may be better for NE Canada, and 7490 may be better out west.  This, too, will have a special eQSL from the producer,  details will be given during the broadcast.  Since it will be Labor Day in the US, many of the songs will be related to work or the lack of it.

Spread the radio love