{"id":50316,"date":"2021-09-24T06:31:34","date_gmt":"2021-09-24T10:31:34","guid":{"rendered":"https:\/\/swling.com\/blog\/?p=50316"},"modified":"2021-09-24T09:11:58","modified_gmt":"2021-09-24T13:11:58","slug":"hfdy-vs-fire-brothers-dan-compares-two-chinese-clone-malahit-sdrs","status":"publish","type":"post","link":"https:\/\/swling.com\/blog\/2021\/09\/hfdy-vs-fire-brothers-dan-compares-two-chinese-clone-malahit-sdrs\/","title":{"rendered":"HFDY vs. Fire Brothers: Dan compares two Chinese Malahit SDR clones"},"content":{"rendered":"<p><b><strong>Many thanks to\u00a0<em>SWLing Post<\/em>\u00a0contributor,\u00a0<a href=\"https:\/\/swling.com\/blog\/tag\/dan-robinson\">Dan Robinson<\/a>, for the following guest post and review:<\/strong><\/b><\/p>\n<hr \/>\n<h1><b><a href=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view.jpeg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-50318\" src=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view.jpeg\" alt=\"\" width=\"1200\" height=\"900\" srcset=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view.jpeg 1200w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view-300x225.jpeg 300w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view-1024x768.jpeg 1024w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view-768x576.jpeg 768w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view-624x468.jpeg 624w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/a>Two Chinese Clones: \u00a0 A Look at Noise Levels<\/b><\/h1>\n<p>Arriving recently here in the radio shack, were a Chinese clone under the name\u00a0of \u201c<strong>Fire Brothers<\/strong>\u201d and another under the name <strong>HFDY<\/strong>.\u00a0 I thought it would be constructive to note the key differences between these two clones, both of which\u00a0are running Malahit 1.10c firmware, and post some video of a brief comparison.<\/p>\n<p>A note in advance of any comments \u2013 I am primarily a HF listener so these comparisons do not cover frequencies above 30 MHz.\u00a0 For those whose focus is on higher frequencies I recommend looking through the many comments on the <a href=\"https:\/\/www.facebook.com\/groups\/malahitdsp\/posts\/2523805574432301\/\" target=\"_blank\" rel=\"noopener\">Malahit Facebook group<\/a> and Telegram by those who use these receivers in those ranges.<\/p>\n<h1><b>HFDY<\/b><\/h1>\n<p><a href=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Front-view.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-50275\" src=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Front-view.jpg\" alt=\"\" width=\"720\" height=\"960\" srcset=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Front-view.jpg 720w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Front-view-225x300.jpg 225w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Front-view-624x832.jpg 624w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><\/a><\/p>\n<ul>\n<li>Constructed of metal-like material (a correction from my previous articles that this is fiberglass of the kind used in printed circuit boards \u2013 thanks to Georgiy of Malahiteam for pointing this out)<\/li>\n<li>Front speaker grille is gold color and appears to be metal but may be fiberglass as well \u2013 audio is quite good<\/li>\n<li><b>Two top-mounted antenna jacks, one 50 ohm, the other Hi-Z (makes switching between HF and FM\/VHF reception easier) with in-use LED indicators<\/b><\/li>\n<li><b>Two high quality right side mounted black metal encoder knobs<\/b> with large power button (<b>clear printed Frequency\/STDBY\/Volume printed on panel<\/b>)<\/li>\n<li>Cabinet held together with TORX screws<\/li>\n<li>1.10c firmware<\/li>\n<li>Receiver is elongated left to right to accommodate left side front-firing speaker, but is thinner overall and could be easily placed in a pocket though not recommended to prevent damage<\/li>\n<li>Like every one of these SDRs, suffers from body sensitivity to touch which reduces signal levels unless some sort of additional ground is attached to cabinet<\/li>\n<li>Internal flat-type Lithium battery of 3300 mAh though apparently capable of fitting up to 8000 mAh<\/li>\n<\/ul>\n<p><!--more--><\/p>\n<h1><b>\u201cFIRE BROTHERS\u201d<\/b><\/h1>\n<p><a href=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Full-front-with-speakers.jpeg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-50324\" src=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Full-front-with-speakers.jpeg\" alt=\"\" width=\"1200\" height=\"1600\" srcset=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Full-front-with-speakers.jpeg 1200w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Full-front-with-speakers-225x300.jpeg 225w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Full-front-with-speakers-768x1024.jpeg 768w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Full-front-with-speakers-1152x1536.jpeg 1152w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Full-front-with-speakers-624x832.jpeg 624w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/a><\/p>\n<ul>\n<li>Vertical format with encoder\/volume knobs on top makes for <b>surprisingly easy tuning, in some respects superior to side or front mount controls.<\/b>\u00a0 Power and USB-C also top-mounted<a href=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-direct-controls.jpeg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-50317\" src=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-direct-controls.jpeg\" alt=\"\" width=\"1200\" height=\"900\" srcset=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-direct-controls.jpeg 1200w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-direct-controls-300x225.jpeg 300w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-direct-controls-1024x768.jpeg 1024w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-direct-controls-768x576.jpeg 768w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-direct-controls-624x468.jpeg 624w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/a><\/li>\n<li>Top-mounted antenna jacks, including one very robust built-in whip (with rubber grommet at base) telescopes into receiver body<a href=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Left-rear-with-stand.jpeg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-50323\" src=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Left-rear-with-stand.jpeg\" alt=\"\" width=\"1200\" height=\"1600\" srcset=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Left-rear-with-stand.jpeg 1200w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Left-rear-with-stand-225x300.jpeg 225w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Left-rear-with-stand-768x1024.jpeg 768w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Left-rear-with-stand-1152x1536.jpeg 1152w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Left-rear-with-stand-624x832.jpeg 624w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/a><\/li>\n<li>Actual metal cabinet, TORX type screws<a href=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Right-side-angle.jpeg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-50320\" src=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Right-side-angle.jpeg\" alt=\"\" width=\"1200\" height=\"1600\" srcset=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Right-side-angle.jpeg 1200w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Right-side-angle-225x300.jpeg 225w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Right-side-angle-768x1024.jpeg 768w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Right-side-angle-1152x1536.jpeg 1152w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Right-side-angle-624x832.jpeg 624w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/a><\/li>\n<li>Large front-firing speaker grille with wrap-around side outlets <b>significantly improves sound with listenable audio possible at much lower volume settings <\/b>than HFDY and DSP-2<\/li>\n<li>Despite robust metal cabinet, much more internally-generated noise than HFDY and DSP-2 and more vulnerable to environmental noise \u2013 in some cases stations only audible with PRE-AM and NR engaged<\/li>\n<\/ul>\n<h1><b>COMMENTS ON \u201cFIRE BROTHERS\u201d<\/b><\/h1>\n<p><a href=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view.jpeg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-50318\" src=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view.jpeg\" alt=\"\" width=\"1200\" height=\"900\" srcset=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view.jpeg 1200w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view-300x225.jpeg 300w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view-1024x768.jpeg 1024w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view-768x576.jpeg 768w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Top-controls-view-624x468.jpeg 624w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/a>Before it arrived, I had high hopes for this vertical format clone, which is labeled as\u00a0Fire Brothers.\u00a0 These clones have been seen on eBay for some time \u2013 as of this writing one other appears but with only a single top-mounted antenna jack, and encoder knobs on the right side.\u00a0 Interestingly, this appears also under HFDY and other seller names.<\/p>\n<p>In some respects, particularly when switching frequency STEP and rapid tuning, this top-mounted encoder knob solution is actually more comfortable than side or front mounted.\u00a0 But as I observed, currently the \u201cFire Brothers\u201d version of the receiver appears to be the only one that places all five main controls on top.<\/p>\n<p>Where performance is concerned, again I had hopes that the all-metal body of the receiver would help with touch-sensitivity.\u00a0 Unfortunately, that does not appear to be\u00a0the case.\u00a0 There is some substantial signal drop off when leaving the receiver standing on its own as opposed to hand holding.<\/p>\n<p>Most disappointing, after using the Russian Malahit DSP-2 and then the HFDY receivers, was <b>obvious high noise levels on the Fire Brothers unit<\/b> \u2013 internally-generated and apparent leakage into the circuit, of environmental house noise.\u00a0 At\u00a0times, this was <b>so bad as to render the Fire Brothers SDR unusable in my view<\/b>.<\/p>\n<p>Another point \u2013 the Fire Brothers SDR appears to <b>require almost constant use of the PRE-AMP setting<\/b>.\u00a0 Tuning 15,770 kHz or 9,330 kHz without it yielded a barely audible signal.\u00a0 Engaging the amplifier brought signals back to at least normal level.\u00a0 This was noticeable also on the stronger 9,980 kHz frequency of a U.S. religious broadcaster \u2013 with PRE-AMP activated, it was easy listening, but the signal dropped right off the cliff without it.<\/p>\n<p>Samples were taken mostly indoors on whip antennas and an indoor You Loop \u2013 HF conditions were not great, but sufficient to provide a comparison between the clones.<\/p>\n<h1><b>COMMENTS ON HFDY<\/b><\/h1>\n<p><a href=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-50274\" src=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone.jpg\" alt=\"\" width=\"942\" height=\"606\" srcset=\"https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone.jpg 942w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone-300x193.jpg 300w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone-768x494.jpg 768w, https:\/\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone-624x401.jpg 624w\" sizes=\"auto, (max-width: 942px) 100vw, 942px\" \/><\/a>In comparison, the HFDY clone did quite a bit better.\u00a0 <b>internally-generated noise was lower<\/b>, as was the impact of environmental noise at various locations inside my house.\u00a0 In one particular location farthest from incoming broadband and other connections, the <b>HFDY was able to hear stations whereas the Fire Brothers was not<\/b>.<\/p>\n<p>Use of the PRE-AMP, while almost always improving reception on shortwave frequencies, was <b>not as critical as it was on the Fire Brothers receiver<\/b>.\u00a0 Noise levels as observed on the HFDY display were noticeably lower.<\/p>\n<p>Tests of the HFDY on mediumwave, and in comparison to the Fire Brothers SDR, showed interesting results as well.\u00a0 HFDY was clearer, with less noise, than the Fire Brothers.\u00a0 I show this in the video, on 630 kHz WMAL and 1090 kHz WBAL.\u00a0 Those stations could be heard more clearly using HFDY than on the Fire Brothers receiver.<\/p>\n<h1>Video Comparison<\/h1>\n<p><span class=\"embed-youtube\" style=\"text-align:center; display: block;\"><iframe loading=\"lazy\" class=\"youtube-player\" width=\"625\" height=\"352\" src=\"https:\/\/www.youtube.com\/embed\/SYMptJMfbNo?version=3&#038;rel=1&#038;showsearch=0&#038;showinfo=1&#038;iv_load_policy=1&#038;fs=1&#038;hl=en-US&#038;autohide=2&#038;wmode=transparent\" allowfullscreen=\"true\" style=\"border:0;\" sandbox=\"allow-scripts allow-same-origin allow-popups allow-presentation allow-popups-to-escape-sandbox\"><\/iframe><\/span><\/p>\n<p style=\"text-align: center;\"><a href=\"https:\/\/youtu.be\/SYMptJMfbNo\" target=\"_blank\" rel=\"noopener\">Click to view on YouTube.<\/a><\/p>\n<h1><b>OVERVIEW<\/b><\/h1>\n<p>For whatever reason, and despite seemingly more robust metal cabinet of the Fire Brothers brand, the HFDY receiver almost routinely cleaned the clock of the other clone.\u00a0 As you can see in the video, noise level differences were striking.<\/p>\n<p>Both the HFDY and Fire Brothers SDRs use 1.10c firmware whereas the Russian-made DSP-2 uses the latest official 2.10D firmware.\u00a0 Both of the clones were sold as the \u201cadvanced\u201d version with official firmware, and both have CPU identifications.<\/p>\n<p>Meanwhile, one user on the Malahiteam Telegram group provided the following summary of his experiences using the Russian DSP-1 and DSP-2 receivers (note that this user had removed the L7 inductor):<\/p>\n<p style=\"padding-left: 40px;\"><b><i>\u201cDSP1 and DSP2 Users:\u00a0 I did [a] comparison of sensitivity between my DSP1\u00a0<\/i><\/b><b><i>(with optional board) and DSP2 (with Inductor L7 removed) yesterday comparing Longwave and MW to 1700kHz .\u00a0 Testing was done using a Comet SMA-W100RX 1m long telescopic whip (outdoors and indoors) and on a G5RV 34 meter long wire antenna.\u00a0\u00a0<\/i><\/b><\/p>\n<p style=\"padding-left: 40px;\"><b><i>HiZ and 50ohm settings as well as PREAMP, RF Gain and Attenuator settings were used for optimal reception and both ran on full charged batteries.\u00a0 Here are my observations:\u00a0\u00a0<\/i><\/b><\/p>\n<p style=\"padding-left: 40px;\"><b><i>[On] Longwave 60kHz to 450kHz [the] DSP2 heard weak airport navigation beacons far better than [the] DSP1.\u00a0 MW performance [was] about the same between 530kHz and 1000kHz.\u00a0 [The] DSP1 worked much better with weak AM broadcasters between 1000kHz and 1700kHz where [the] DSP2 had no reception at all on certain weak stations while [the] DSP1 heard the weak station and [could] identify the song played and radio station identification.\u00a0\u00a0<\/i><\/b><\/p>\n<p style=\"padding-left: 40px;\"><b><i>[On] SW and up &#8211; seems like they are equal in performance.\u00a0 I will work on a detailed plot to characterize both radios using a calibrated signal source that modulates in AM\/FM and SSB when I get a chance.\u00a0 I have a technician friend who will help.<\/i><\/b><\/p>\n<p style=\"padding-left: 40px;\"><b><i>. . .I suspect that DSP Malihit receivers reception performance would vary very slightly between each other (I am referring to comparing one DSP-1 to another\u00a0<\/i><\/b><b><i>DSP-1 and DSP-2 compared to another DSP-2).\u00a0 I like the DSP-2 more as noise\u00a0<\/i><\/b><b><i>on VHF is virtually non-existent and LW performance [is] outstanding.\u201d<\/i><\/b><\/p>\n<p>Another user on the Telegram group stated that \u201cMW performance [was] about the same between 530kHz and 1000kHz&#8221; suggesting that [the] DSP-1 is the same as the DSP-2 or the same on LW [and] better [than the] DSP-2.\u201d.<\/p>\n<p>In a comment on my previous article, Georgiy of Malahiteam responded with some observations covering a number of points and I thank him for this quick response.<\/p>\n<p>He acknowledges that a front-facing speaker will produce better audio and says shielding in the HFDY clone appears to have been done well, as shown in a photo, but reiterates that the most critical path of interference is \u201cdirect airborne&#8230;.from the display to the antenna\u201d thus shielding is \u201cabsolutely without impact.\u201d<\/p>\n<p>As for antennas, Georgiy also reiterates that for HF\/Shortwave reception, it is always better to use longer antennas over whips.\u00a0 And he questions the advisability of leaving two antennas simultaneously saying that this \u201cworsens the reception due to the fact that the resistance of the receiver will no longer be 50 ohms&#8230;.and alignment will be broken.\u201d<\/p>\n<p>Finally, Georgiy also states that Malahiteam is <b>not connected with Chinese manufacturers in any way<\/b>, with copyright belonging only to the Russian team.<\/p>\n<p>\u201cSome clone manufacturers buy keys from us,\u201d he says, but \u201cthis number is disproportionately less than the total number of clones sold.\u201d<\/p>\n<p>There continues to be one major ongoing reality for current and prospective users of Malahit\/Malachite receivers, whether original Russian versions or Chinese clones:\u00a0 these really are not good performers on a whip antenna.<\/p>\n<p>As one user noted:\u00a0 <b>\u201cWhen using the whip antenna the interference from the touch screen is not acceptable\u201d<\/b> \u2013 which pretty much sums the continuing challenge for developers and clone makers.<\/p>\n<p>Some people, of course, have been trying MLA-30 and amplified antennas from Greece with the Malahit receivers with varying results.\u00a0 I have never found the Greek antennas to do much to improve things.<\/p>\n<p>When testing both of these particular clones, as with the Russian-made DSP-2, on an un-amplified You Loop located indoors, things improved over using just a telescopic whip.\u00a0 But as noted above, the \u201cFire Brothers\u201d SDR was all but useless due to internally-generated and environmental noise at several indoor locations.<\/p>\n<h1><b>CONCLUSIONS<\/b><\/h1>\n<p>Would I recommend acquiring either of these China-made clones?\u00a0 The answer is, as with many things, yes and no.<\/p>\n<p>The cost of acquiring one of these Chinese clones is in the $150 to $180 range.\u00a0 The HFDY has certain qualities that push it above the crowd \u2013 with considerable curb appeal with its front gold speaker producing excellent audio.<\/p>\n<p>It comes with an attractive package with carrying case, USB-C, small metal stand, and a rubber whip antenna.<\/p>\n<p>The other clone under the \u201cFire Brothers\u201d label is the only one of its kind seen with all controls and jacks at the top of the cabinet.\u00a0 It&#8217;s an interesting arrangement (reminds one of some of the old Rhode &amp; Schwarz frequency measurement devices).<\/p>\n<p>Placement of encoders at the top does not, in my view, significantly reduce the tuning experience.<\/p>\n<p>Add to this what appears to be a double speaker with wrap-around side grilles (this could be a single larger speaker with just additional radiating outlets) producing superior sound and you have another interesting feature which enhances listening.<\/p>\n<p>As for battery power, reports from users indicate that the HFDY can accept up to an 8,000 mAh flat lithium battery, though I have not opened the cabinet on mine to check on how easy it would be to replace.\u00a0 The thickness of the \u201cFire Brothers\u201d SDR seems to indicate that user replacement would also be possible on that clone.<\/p>\n<p>Meanwhile, it remains to be seen how quickly the Russia Malahiteam can bring to market their DDC version of the Malahit, which we can hope has less noise than the original DSP-1 and DSP-2 versions of the receiver, and what cost to the consumer.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Many thanks to\u00a0SWLing Post\u00a0contributor,\u00a0Dan Robinson, for the following guest post and review: Two Chinese Clones: \u00a0 A Look at Noise Levels Arriving recently here in the radio shack, were a Chinese clone under the name\u00a0of \u201cFire Brothers\u201d and another under the name HFDY.\u00a0 I thought it would be constructive to note the key differences between [&hellip;]<\/p>\n","protected":false},"author":15,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[3194,433,836,3,3196,26,129,43,154,158],"tags":[2635,9464,9463,9453,9452,9372,3355,157,4087],"class_list":["post-50316","post","type-post","status-publish","format-standard","hentry","category-guest-posts","category-mediumwave","category-new-products","category-news","category-portable-radio","category-radios","category-reviews","category-shortwave-radio","category-shortwave-radio-reviews","category-software-defined-radio","tag-dan-robinson","tag-fire-brothers","tag-fire-brothers-malahit-sdr","tag-hfdy-malahit-clone","tag-malahit-chinese-clone","tag-malahit-dsp-2","tag-portable-sdrs","tag-sdr","tag-software-defined-radio"],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/pn3uc-d5y","jetpack-related-posts":[{"id":50302,"url":"https:\/\/swling.com\/blog\/2021\/09\/dan-adds-updates-to-his-malahit-sdr-and-variant-reviews\/","url_meta":{"origin":50316,"position":0},"title":"Dan adds updates to his Malahit SDR and variant reviews","author":"Thomas","date":"September 22, 2021","format":false,"excerpt":"Many thanks to\u00a0SWLing Post\u00a0contributor,\u00a0Dan Robinson, for the following update to his previous post regard the DSP-2 and HFDY Malahit SDRs: Malahit and HFDY Updates by Dan Robinson HFDY CLONE:\u00a0 As noted by a reader in comments, the Chinese-made HFDY leaves out a large portion of the military AIR band, with\u2026","rel":"","context":"In &quot;News&quot;","block_context":{"text":"News","link":"https:\/\/swling.com\/blog\/category\/news\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/China-Clone.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":50271,"url":"https:\/\/swling.com\/blog\/2021\/09\/malahit-dsp-2-versus-chinese-clone-taking-the-gloves-off\/","url_meta":{"origin":50316,"position":1},"title":"Malahit DSP-2 versus Chinese Clone: Taking the Gloves Off","author":"Thomas","date":"September 20, 2021","format":false,"excerpt":"Many thanks to\u00a0SWLing Post\u00a0contributor,\u00a0Dan Robinson, for the following guest post: Malahit 2 versus Chinese Clone: Taking the Gloves Off New DDC (Direct Digital Conversion) Version in Development by Dan Robinson It's been a few weeks since my last commentary on the Malahit\/Malachite, which as\u00a0of this writing remains at the DSP-2\u2026","rel":"","context":"In &quot;New Products&quot;","block_context":{"text":"New Products","link":"https:\/\/swling.com\/blog\/category\/new-products\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Rear.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Rear.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Rear.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/09\/Rear.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":50089,"url":"https:\/\/swling.com\/blog\/2021\/08\/malahit-dsp-2-dans-thoughts-on-external-antennas-firmware-and-purchase-decisions\/","url_meta":{"origin":50316,"position":2},"title":"Malahit DSP-2: Dan&#8217;s thoughts on external antennas, firmware, and purchase decisions","author":"Thomas","date":"August 27, 2021","format":false,"excerpt":"Many thanks to\u00a0SWLing Post\u00a0contributor,\u00a0Dan Robinson, for the following guest post: Additional Thoughts on the Malahit DSP-2\u00a0 Potential for Noise Reduction Using Non-Whip Antennas Latest Firmware Changes by Dan Robinson After my last update on the Russia-made Malahit DSP-2, I thought it important to add something about the receiver, as it\u2026","rel":"","context":"In &quot;Guest Posts&quot;","block_context":{"text":"Guest Posts","link":"https:\/\/swling.com\/blog\/category\/guest-posts\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/07\/Malahit-DSP-2-Teamalahit-1-1.jpeg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/07\/Malahit-DSP-2-Teamalahit-1-1.jpeg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/07\/Malahit-DSP-2-Teamalahit-1-1.jpeg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2021\/07\/Malahit-DSP-2-Teamalahit-1-1.jpeg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":42776,"url":"https:\/\/swling.com\/blog\/2020\/04\/fenu-posts-a-malahit-dsp-afedri-lan-iq-head-to-head-comparison\/","url_meta":{"origin":50316,"position":3},"title":"Fenu posts a Malahit-DSP &#038; Afedri LAN-IQ &#8220;Head to Head&#8221; comparison","author":"Thomas","date":"April 10, 2020","format":false,"excerpt":"Many thanks to SWLing Post contributor, Dan Robinson, who shares the following video from Fernando Duarte, comparing the Malahit-DSP and the new Afedri LAN-IQ: https:\/\/youtu.be\/4n12C9qwzVo Click here to view on YouTube.","rel":"","context":"In &quot;New Products&quot;","block_context":{"text":"New Products","link":"https:\/\/swling.com\/blog\/category\/new-products\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2020\/04\/Malahit-DSP-and-Afedri-LAN-IQ.jpeg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2020\/04\/Malahit-DSP-and-Afedri-LAN-IQ.jpeg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2020\/04\/Malahit-DSP-and-Afedri-LAN-IQ.jpeg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2020\/04\/Malahit-DSP-and-Afedri-LAN-IQ.jpeg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":41940,"url":"https:\/\/swling.com\/blog\/2020\/02\/the-malahit-dsp-a-potential-holy-grail-portable-sdr\/","url_meta":{"origin":50316,"position":4},"title":"The Malahit-DSP: A potential Holy Grail portable SDR?","author":"Thomas","date":"February 9, 2020","format":false,"excerpt":"Many thanks to SWLing Post contributor, Dan Robinson, who provides this update to his article on the Belka DSP receiver. Dan writes: One of the other DSP radios shown being demonstrated on YouTube is this one by Georgy Yatsuk, presumably from somewhere in Russia. In his comments posted on January\u2026","rel":"","context":"In &quot;New Products&quot;","block_context":{"text":"New Products","link":"https:\/\/swling.com\/blog\/category\/new-products\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2020\/02\/edelstein-SDR-Feni.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2020\/02\/edelstein-SDR-Feni.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2020\/02\/edelstein-SDR-Feni.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":40548,"url":"https:\/\/swling.com\/blog\/2019\/11\/the-new-malahit-dsp-a-portable-all-in-one-wideband-sdr-receiver\/","url_meta":{"origin":50316,"position":5},"title":"The new Malahit-DSP: A portable all-in-one wideband SDR receiver","author":"Thomas","date":"November 12, 2019","format":false,"excerpt":"Many thanks to SWLing Post contributor, H. Garcia (PU3HAG), who writes: Hey Thomas, Some very exciting news on the topic of portable all-band receivers comes from Russia! A group of engineers have just released for ordering the new Malahit-dsp. And it's truly impressive! Picture an Icom IC-R8600 with the size\u2026","rel":"","context":"In &quot;New Products&quot;","block_context":{"text":"New Products","link":"https:\/\/swling.com\/blog\/category\/new-products\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2019\/11\/Malahit-dsp-Board.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2019\/11\/Malahit-dsp-Board.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2019\/11\/Malahit-dsp-Board.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/swling.com\/blog\/wp-content\/uploads\/2019\/11\/Malahit-dsp-Board.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]}],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/swling.com\/blog\/wp-json\/wp\/v2\/posts\/50316","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/swling.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/swling.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/swling.com\/blog\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/swling.com\/blog\/wp-json\/wp\/v2\/comments?post=50316"}],"version-history":[{"count":0,"href":"https:\/\/swling.com\/blog\/wp-json\/wp\/v2\/posts\/50316\/revisions"}],"wp:attachment":[{"href":"https:\/\/swling.com\/blog\/wp-json\/wp\/v2\/media?parent=50316"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/swling.com\/blog\/wp-json\/wp\/v2\/categories?post=50316"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/swling.com\/blog\/wp-json\/wp\/v2\/tags?post=50316"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}