QuickSilver QS1R

The Quicksilver QS1R software defined radio

The Quicksilver QS1R Receiver is a software direct sampling receiver. It features a Linear Technologies LTC2208 16 bit, 130 MSPS Analog Digital Converter (ADC) and an Altera EP3C25 Cyclone III FPGA. Connectivity to the PC is through a high speed USB 2.0 interface.

Specs:

  • Frequency Range (BNC LPF Input): 15 kHz to 62 MHz
  • Frequency Range (SMA direct input): 15 kHz to 300 MHz
  • Input Impedance: 50 ohms
  • Clipping RF Level: +9 dBm
  • Maximum Display Bandwidth: 4 MHz
  • DC Sampling Clock: 125 MHz (1 – 130 MHz with external encode input)
  • I/Q Image Rejection: >110 dB
  • MDS (500 Hz): -111 dBm @ 14.1 MHz
  • BDR: 125 db
  • Voltage: 5 – 6 VDC, 2A fused, reverse polarity protected
  • Current Draw: 500 mA (typ.)
  • Connectors: BNC (RF IN LPF), SMA (RF IN, EXT ENCODE CLOCK), USB Type “B”, 2.1 mm DC Power
  • LEDS: Power, Clipping, Debug (internal)
  • Dimensions: 160 x 100 mm (3.299″ x 3.940″) (board size)

Resources:

  • Manufacturer’s Product Page – Quicksilver QS1R
  • Reviews
  • Retailers
    • Manufacturer’s Product Page – Quicksilver QS1R
This entry was posted in Made in USA, Quicksilver, Software-Defined Radios (SDR) and tagged , , , , . Bookmark the permalink.