Tag Archives: Made in USA

Lazy Dog Engineering LD-1B2

The LD-1B a general-coverage, 100 kHz – 30 MHz, USB-controlled shortwave receiver. The LD-1B2 comes with an installed USB isolator, which improves the noise floor (and sensitivity) by about 6 dB over previous LD models. The LD-1B2 is manufactured by … Continue reading

Posted in Lazy Dog Engineering, Made in USA, Software-Defined Radios (SDR) | Tagged , , , , , | Leave a comment

RFspace NetSDR

The NetSDR radio is a high performance networked SDR with 1.6 MHz bandwidth. The NetSDR uses a high performance 80 MHz, 16 bit ADC with both dithering and randomization for best performance. The output I/Q bandwidth is configurable via software. … Continue reading

Posted in Made in USA, RFSpace, Software-Defined Radios (SDR) | Tagged , , , , , | 3 Comments

Ten-Tec Model 1253 – 9-Band SW Receiver

The Ten-Tec Model 1253 9 band regenerative shortwave receiver kit. A classic “first radio kit”. Ten-Tec has combined the very same audio output circuit of Ten-Tec transceivers with a modern FET design for classic regenerative SWL receiving plus one-button electronic … Continue reading

Posted in Kits, Made in USA, Ten-Tec | Tagged , , , , , | Leave a comment

Ten-Tec Model 1054 – Regenerative 4-Band SWL Receiver

The Ten-Tec Model 1054 is a simple 4 band regenerative shortwave receiver kit. Band coverage: 49 meter SWL band, 40 meter ham band, 31 meter SWL band, plus 12-15 MHz tuning for daytime shortwave listening, 20 meter ham band and … Continue reading

Posted in Kits, Made in USA, Ten-Tec | Tagged , , , , , | Leave a comment

Ten-Tec Model 1254 – Superhet Receiver Kit

The Ten-Tec Model 1254 Superhet Receiver Kit combines the satisfaction of the kit building experience with the performance features expected in a modern HF receiver.  You will build a true dual-conversion superhet with a microprocessor-controlled frequency synthesizer. Digital LED readout. … Continue reading

Posted in Kits, Made in USA, Ten-Tec | Tagged , , , , , | 1 Comment

Ramsey SR2C – Shortwave Receiver Kit

The Ramsey SR2C is a complete shortwave radio kit guaranteed to inspire awe in any listener. This very sensitive (about a microvolt!) receiver is a true superhet design with AGC and plenty of speaker volume. Features: Tunable over 2 MHz … Continue reading

Posted in Kits, Made in USA, Ramsey Electronics | Tagged , , , , , | Leave a comment

Midnight Science XSS-MMSW

The My Marconi Shortwave Crystal Set Kit features a single-tuned front end followed by a two-transistor audio amplifier, and accepts a dual-earphone assembly or high-Z headphones. The set is reasonably selective for having only one tuned circuit. The set covers … Continue reading

Posted in Kits, Made in USA, Midnight Science | Tagged , , , , , | Leave a comment

Ten-Tec RX-340

The Ten-Tec RX-340 is a multi-mode, general coverage synthesized receiver utilizing extensive Digital Signal Processing. DSP brings the performance and repeatability of expensive military grade communications receivers into the price range of top end commercial receivers for shortwave listeners. Tunable … Continue reading

Posted in DRM, Made in USA, Professional, Ten-Tec | Tagged , , , , | 1 Comment

RFspace SDR-IP

The SDR-IP is an internet protocol (TCP/IP), high-performance, software defined receiver with 1.8 MHz bandwidth. It offers versatility for scientific research, radio astronomy, shortwave listening and amateur radio. Specs: Frequency Range: 0.01 – 34 MHz * Digital Down Converter: Xilinx … Continue reading

Posted in Made in USA, RFSpace, Software-Defined Radios (SDR) | Tagged , , , , , | Leave a comment

RFspace SDR-14

The SDR-14™ is a 14-bit software defined radio receiver. It offers a broad range of spectrum analyzer and demodulation capabilities. Specs: Maximum display bandwidth of 30 MHz at a 254 HZ RBW. Records and plays back spectrum segments up to … Continue reading

Posted in Made in USA, RFSpace, Software-Defined Radios (SDR) | Tagged , , , , , | Leave a comment