US Navy finds ham radio training makes “workers better at their jobs”

(Source: Southgate ARC via Mike K8RAT)

Can learning amateur radio make for better engineers and software developers?

Writing in C4ISRNET – Electronic Warfare, Eric Tegler says:

When a group of [US] Navy engineers and software developers took time away from their day jobs in December, they spent the time pursuing a task long considered passe: they became licensed amateur radio operators.

Some 23 employees from Naval Air Warfare Center Weapons Division (NAWCWD) took a week-long class in amateur radio at Point Mugu, California culminating with an FCC amateur radio license test. All passed and are certified at the “technician” level for amateur radio operation [permitted 200 watts on some HF bands, 1500 watts above 30 MHz].

Now, Navy officials say the move may make the workers better at their jobs. The staff gained an understanding of radio frequency (RF) propagation that’s essential to what they do, said Brian Hill, electromagnetic maneuver warfare experimentation lead and collaborative electronic warfare supervisor at NAWCWD.

Hill, who earned his amateur radio license in high school, noticed that while most of his department’s recent hires had degrees in computer science, many had little background in RF theory or operation.

“You can explain antenna patterns and concepts like omni-directional vs directional using Smith charts, but it’s helpful to add a demonstration to really convey the concept,” Hill said. “You can explain modulation as a concept, but for a demo… let them listen to how modulated digital signals with audio frequencies sound… For those who never knew the joy of hearing a 2400 bps modem connect over a telephone line, it was a new concept!”

These concepts are central to electromagnetic maneuver warfare.

“We need to be able to have awareness of all threats and opportunities from [zero frequency] to light within an integrated system,” Hill said. “Our adversaries are looking at the entire spectrum to use against us, and we need to do the same. Having awareness of how the atmosphere changes from daylight to night and how that affects propagation of [high frequency] is important.”

This can be critical for young developers/engineers whose experience is typically limited to the UHF/EHF-based systems now in vogue across communications, guidance and ISR technologies.

Read the full story at
https://www.c4isrnet.com/electronic-warfare/2019/02/06/can-learning-ham-radio-make-for-better-engineers-and-software-developers/

Spread the radio love

7 thoughts on “US Navy finds ham radio training makes “workers better at their jobs”

  1. Jaakdee

    I have still not worked out how this guy manages to explain antenna radiation patterns using Smith Charts.

    I wouldn’t want to be in his study classes !

    Reply
  2. Jake Brodsky, AB3A

    Uh, yeah. This has been one of the chartered goals of the Amateur Radio Service from the very beginning. It says so, right there in 47CFR97.1(d): “Expansion of the existing reservoir within the amateur radio service of trained operators, technicians, and electronics experts.”

    Reply
  3. DL4NO

    This is *very* old news: Beginning in WW1 the military and other agencies used the knowledge of radio amateurs. An example that appeared in this blog are those hams in GB that wrote down coded German transmissions and sent them to Bletchley Park.

    After WW2 the US military asked hams among the military personel in Germany and South Korea to report to the signal corps. The motive for this was emergency traffic. A few sources for this:

    Foreign Notes. In: QST May 1945, p. 69

    Foreign Notes. In: QST October 1945, p. 37

    Foreign Notes In: QST June 1947, p. 45

    I.A.R.U. Notes. In: QST September 1947, p. 132 I.A.R.U. News. In: QST June 1948, p. 35

    I.A.R.U. News. In: QST October 1948, p. 104

    Reply
  4. Jaakdee

    “You can explain antenna patterns and concepts like omni-directional vs directional using Smith charts,”

    Really ? 😉

    Reply
    1. Ron Wright, N9EE

      A Smith Chart is used to determine how impedance change along a transmission line and also show SWR along the line, nothing to do with the antenna except the feed point that produces the impedance at that point for the feedline. I wondered about that comment also.

      But I am sure what one studies for getting a license about radio propergation and how various bands work is useful for the Navy ops.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.