Tag Archives: Chris Rolfe (M0OZP)

Converting Tecsun signal meter numbers into five strength units?

Many thanks to SWLing Post contributor, Chris Rolfe (M3OZP), who writes with the following inquiry:

Don’t know if anyone can help.

I have a Tecsun PL-880, and it shows signal strength in db. How can I work out the signal strength as 1 to 5? All my other radio have 1 to 5 signal strength meters which is what I have always been used to.

Many thanks.

Chris Rolfe
M3OZP

Thank you for your question, Chris. The signal meter on the PL-880 and a number of other late-model Tecsuns that use similar DSP chips share the signal display which indicates both the signal strength and signal-to-noise ratio.  I believe the dBu number indicates the conducted voltage across the receiver’s internal resistance.

It’s perhaps one of my quirks, but as a listener I actually pay little attention to signal displays on portables unless I’m evaluating signal strength for a report or even using it to locate a local noise. Converting those numbers into an S1 to S5 number is simply something I would do by “guesstimating.” Yeah, not terribly scientific.

There are folks in the SWLing Post community who can do a much better job explaining the readout and how to interpret/convert signal strength across the MW, SW and FM bands.

Post Readers: Please comment if you can shed some light on simplifying signal strength for Chris.

Spread the radio love