Many thanks to SWLing Post contributor, Dan Robinson, who shares the following video from Fernando Duarte highlighting the new Alfredi LAN-IQ SDR:
I can’t wait to check out Fenu’s full review of the LAN-IQ when it is posted on his excellent website. The screen seems to be very responsive and layout well thought through.
The Afedri website notes the following features and specifications:
- 30 kHz to 1700.00MHz continuous frequency range
- Direct sampling
- DDC – Digital Down-Conversion
- 12- bit 76.8 MSPS A/D conversion
- Stand Alone mode (AM, CW, SSB, NFM, WFM stereo, BPSK, QPSK demodulators)
- Up to 2.2MHz recording and processing bandwidth
- Waterfall display functions, when used with appropriate software
- Recording and playback, when used with appropriate software
- Sensitivity – MDS -136 dBm at 500Hz bandwidth (0.03MHz-35MHz)
- Sensitivity – MDS -143.5 dBm at 500Hz bandwidth (50MHz-435Mhz)
- USB 2.0 (Full Speed) interface
- LAN interface for remote access
- Compatible with: Linrad, Winrad, HDSDR, Studio1, SDR Console (SDR-radio), CuteSDR, SdrDX, Quisk, PowerSDR_mrx
- Powered from USB or external power supply 7-10VDC
- Dimensions 120mm deep x 78mm wide x 27mm high
- Unit cost – $339
The LAN-IQ can be connected to a PC via USB or Ethernet (at a 2400 kHz sample rate).
The Afedri website also has a few videos of the LAN-IQ in operation:
As you might have noted, the encoder knob seen in Fenu’s video is not standard but can be added at an additional cost and extended lead time. If I were to order the LAN-IQ, I would want the encoder knob as well.
Also, note that due to Covid-19 affecting the supply chain, Afedri SDR informs me that LAN-IQ availability will be adversely affected. If you would like to order a LAN-IQ, contact Afedri SDR via their website.
Click here to check out the LAN-IQ and all specs at Afedri SDR-Net.