Many thanks to SWLing Post contributor, Mike Ladd (KD2KOG), who writes with a Tecsun PL-310ET tip:
Happy Holidays! I found this trying different button combos on the PL-310ET. I don’t think this is documented online.
Tecsun PL-310ET Memory Reset
- Power off the radio
- Press and hold the Del key.When the radio beeps release the Del key.
- Press and hold the Del key again. When the radio beeps a second time hit the power button. All the station memories will be erased.
This should work on most of the Tecsun radios.
Very cool! Thanks for the tip, Mike!
Olá, como faço para funcionar as teclas, a luz ascende mas nenhuma tecla funciona
Fine & dandy, but how do I keep my cherished little PL310et from turning itself off after a preset amount of time? I don’t remember how I set the timer and I’ve never been able to figure out how to turn it off. Any help would be wonderful. Thanks
With the radio OFF, Push and HOLD power button until appear ·On” or a number flashing in place of frequency.
If you see a number flashingm it´s mean that SLEEP FUNTION is activated, and the number is the minutes remaining until radio auto power off.
To deactivate, turn tuning know while the number flashes to set it to “On” on display. To confirm that is OK, turn off the radio, then press and hold again power button. If “On” appears on display, the Sleep funtion is deactivated and radio will remain on until press power or battery runs out.
Great! and Thank you si much.
On the PL-380, which is very similar to the 310 :
1- Power off the radio
2- Press and hold the Del key.When the radio beeps release the Del key.
3- Press and hold the Del key again. When the radio beeps again, release the Del key. All the station memories will be erased.
thanks…!
Klyber, Natal, Brazil.
Hola a todos,
Mi TECSUN PL-310et no me permite presionar ninguna tecla, aparece “LO” y titila la figura de la batería como que estuviera sin carga. Por favor alguien que me pueda ayudar con la configuración.
Is there a ” Default Reset” that will bring the radio back to its original factory settings ?
That is a nice selling feature, also the button next to it to turn off that annoying beep every time you press a key.
Erasing all stations in PL-330:
1) Turn radio off, keep delete until it displays del and a blinking all
2) Press power, only del will be displayed for some seconds
3) When it gets to the normal display, the erasing Is done
Thank you for this!
No problem at all. Looking for other hidden features.