Many thanks to SWLing Post contributor, Rob Gray, who shares the following tips:
Reciva Gateway not responding: More Info, possible workarounds.
Reading the comments in the SWLing Post blog, it sounds like many people are receiving the dreaded “Reciva Gateway not responding” message and at a loss how to proceed from there. I’m assuming that for every person that writes a comment, there are many experiencing the message and not writing. Hopefully, the following information will save some internet radios from becoming e-waste and ending up in a landfill.
As background, I’m only familiar with the CCrane WiFi1 radio, this one.:
There is a way on these radios to at least recover use of the stations stored in the presets (you did enter on the presets, didn’t you?). The material is repeated in the comments of this webpage. I suspect that many people won’t wade through the 100+ comments, therefore a separate blog posting is offered.
On to the important stuff…
Here’s what works for me as of October, 2021
During startup, the radio displays:
Message: Finding Gateway
Message: Network Error Reciva Gateway not responding
For the message “Network Error Reciva Gateway not responding”, press the BACK button (which then shows Select network). Then press the BACK button AGAIN. The display shows Preset x Stopped. At that point, select a preset from the remote or radio, and it should lock in and play your station preset (assuming the info entered to the preset is valid)!
I’ve been doing this for weeks and it seems to consistently work!
Some other possible options
Depending upon the internet radio (and I have personal experience with only two, both from CCrane), there may be some other possible solutions.
I’ve looked into the Sharpfin project and it looks very interesting. With the demise of Reciva, there’s activity again with getting the radios functioning with this software. Do an internet search for the latest information and/or these links are a starting point of what’s involved:
I’ve had success with my CCrane WiFi2 radio, which is TuneIn-based, using Serviio and the UPnP utility built into the wifi radio. I was NOT able to get Serviio to work with my CCrane WiFi1 (Reciva) radio for streaming live audio, but could access audio files stored on the main computer hard-drive (with tinkering). There may be other similar options usable with UPnP, but I haven’t investigated much beyond Serviio.
That’s all that I have on the topic for now. However, DON’T discard your radios yet. There are some talented and motivated people trying to figure out ways to keep these internet radios running. Keep checking back on the SWLing Post blog comments as people continue to post new information. Tinker around with them, you might get them running again! If you do decide to discard your radio, I’d urge you to find a responsible method of disposal, donate in general, donate to a gifted and motivated hacker, etc. Good luck to all that have been affected by this unfortunate and unnecessary decision to shut Reciva down.