Just ordered the new $149/$199 uBITX v 6.0 QRP transceiver

Many thanks to SWLing Post contributor, Pete (WB9FLW), who notes that Ashhar Farhan (VU2ESE) has recently announced the availability of the uBITX v 6.0–as Pete notes, “just in time for the Holidays!

Pete shared the following message from Farhan:

Here is what [the uBITx v 6.0] looks like :

And of course, you can buy it on hfsignals.com. The shipping will happen from Tuesday onwards. We have a limited supply of the first 200 boards. The rest is for after Christmas.

The most important thing about this revision is that the Radio circuitry is almost unchanged. We have incorporated the connectors on the PCBs. So, this kit needs none of the confusing soldering. You snap in the TFT Raduino onto the main board, plug the power and antenna from the back, snap on headphones, plug in the mic (supplied with the kit) and off you go!

It is offered in two kits now : The basic kit (150 USD) is without the box (like old times) but with a microphone and two acrylic templates for the front and back panels.

The Full kit (199 USD) has the box with speaker, mounting hardware etc. Both are described on the website.

Now, about the TFT display:

For those who are using the 16×2 display and you would like to upgrade, you will have to do three things:

Add a heatsink to the 7805 of the raduino

Buy [here] and hook it up as per [this article].

Grab the new Arduino sketch from https://github.com/afarhan/ubitxv6

Background:

I have been hacking away at adding a TFT display for the Arduino for sometime. Finally, I managed to do this with a really inexpensive 2.8 inch TFT display that uses a controller called the ILI9341. The display update is slow but, clever guy that I am, the display very usable. it uses the same pins that earlier connected to the 16×2 LCD display. This display is available everywhere for a few dollars.

Many thanks, Pete, for sharing this announcement. The price was simply too attractive to me, so I just purchased the full kit for $199 US. (Thanks for being the good enabler you are, Pete!)

Update – 30 May 2020: Many thanks to Armin Sander who notes that the uBITX V6 full kit price has increased to $209 US.

I’ll post an update when I receive the transceiver and assemble it. I do hope this is a workable little radio–it would be pretty amazing for newcomers to the hobby to be able to get on the HF bands for a mere $200 US. I also love the fact that this is all based on open-source, hackable technologies.

Spread the radio love

10 thoughts on “Just ordered the new $149/$199 uBITX v 6.0 QRP transceiver

  1. Petr

    I am interresting in upgrade for new Nextion LCD with KD8CEC f/w but can not find where to buy the LCD kit…:(

    Reply
  2. Ruben Espada

    where do a get a logic voltage to drive my PA when i hit the mic or key ? I have the ptt conection in my ampl.ready hook up
    where do i get the conection from the V6 to the amp ? already has the conection from the ampl.ready…

    thanks…
    Ruben

    Reply
  3. RonF

    I wonder how the resistive touchscreen will hold up. My experience with them, mostly ones from Ali which appear identical to the recommended one, is while they work OK out of the box they all get pretty flakey pretty quickly. :-/

    Oh well, at least the source is available so you can replace it with a screen with semi-decent capacitive touch…

    Reply
  4. Mario

    As appearances go, this one presents a nice uncluttered front panel and clean looking body style. Jeez, the price is right, will be interested in seeing future reviews. Thanks for posting.

    Reply
  5. Ronnie

    With this being so easily software programmable wonder if the designers would offer a SWL version with the bands the shortwave bands and no transmitter (so more “buttons” for bands and controls.

    Reply
    1. Thomas Post author

      Although I’ve no idea if this radio is truly general coverage, it seems since it’s open-source, it could be tweaked on the software side.

      Reply
    2. RonF

      Tuning-wise It looks general coverage – but from the (horribly laid-out) schematic it appears to be quite narrow bandwidth, to the point of being SSB-bordering-on-CW-specific. In its current config, I don’t think it’d make a good general coverage SWL receiver.

      Reply
  6. John AE5X

    How do you and I keep ending up with the same radios, Thomas?! This one looks like an amazing value even if only for tinkering – can’t wait!

    73 – John AE5X

    Reply
    1. Thomas Post author

      Ha ha! Indeed! You know, I don’t even mind that the display is slow re-draw. I can’t wait to give it a go! We’ll have to try a uBITX to uBITX Q, OM!

      73,
      Thomas

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.