Tag Archives: Hallicrafters SX-24

Mike IDs a Hallicrafters Skyrider in Avengers scene

Avengers-Ultron-Hallicrafters-Radios

In response to my post about finding a glowing Hallicrafters radio in a scene from the Avengers: Age of Ultron, SWLing Post reader, Mike (AC4NS) writes:

“I put the pic in Lightroom and pulled it out of the shadows.

It is definitely a Skyrider and not an SX-28.”

Avengers-Ultron-Hallicrafters-Radios-1024x429

Wow–I’m amazed there was enough information in that photo to pull it out of the shadows! You can see the silk screening and the SEND-REC. switch in the lower right corner.

Again, here’s my Hallicrafters SX-24 Skyrider Defiant for comparison:

My Hallicrafters SX-24

I know why they used a Skyrider in the film; the warm glow of the dials and signal meter were simply irresistible! (At least, they are for me!)

Thanks for helping ID this, Mike!

Spread the radio love

Avengers ‘Age of Ultron’ scene: is that a Hallicrafters receiver?

Avengers-Ultron-Hallicrafters-Radios-1 With the recent posts about shortwave radio in films (Star Wars and Star Trek), I remembered a scene from Avengers: Age of Ultron where I thought I spotted a vintage Hallicrafters receiver.

In the scene, Hawkeye (Jeremy Renner) is using an “old school spy method” to find the whereabouts of Black Widow (Scarlett Johansson). I remembered Haweye sitting in front of a 1940s era radio.

This weekend, I found the clip from the movie (first time I had seen it since the theatre) and sure enough, I’m positive this is a Hallicrafters. Click on the images above or below to enlarge.

Avengers-Ultron-Hallicrafters-RadiosI can’t quite determine the Halli model, though–can anyone ID it?

The images aren’t the best: the scene is dark and the radio at quite an angle. Still, there’s no mistaking that Hallicrafters glow.

My Hallicrafters SX-24

My Hallicrafters SX-24

I think there’s a good chance it’s the same model I have in my radio shack: the Hallicrafters SX-24 ‘Sky Defiant‘–but I can’t quite confirm. Perhaps it’s an SX-28?

Can anyone provide a positive ID? Please comment!

Spread the radio love

Tallying up Dayton Hamvention purchases

It have a hard time passing up old military gear, like this Signal Corps BC-221-AL signal generator.

I’m a sucker for old military gear, like this Signal Corps BC-221-AL signal generator. (Click to enlarge)

This year, at the Dayton Hamvention, I spent more money than I ever have.  Though the Hamvention is a showcase of innovations and flea market treasures, I typically walk away with a few connectors, cables, or maybe some handy accessories; I rarely spend more than $100, though I budget much more.

But this year was an exception. I walked away with a few bigger-ticket items I found irresistible.  Buyer’s remorse? Nope.

SWLing Post reader, Mike, asked what I purchased, so instead of sending him an email with the tally, I thought I’d post my finds here.

Hallicrafters SX-24

Hamvention-1

Hamvention-01

I already have an SX-24, but this one is cosmetically superb for its age. The seller told me that she “lights up” but has no audio; it was an estate sale item.  I assume that it has a bad capacitor or two (or more). No doubt, it can be fixed and will fill my radio room with warm audio in due time. At least, that’s the theory!

I purchased this Hallicrafters SX-24 for $60.00

Signal Corps BC-221-AL Signal Generator

Hamvention-08Hamvention-06Hamvention-07Hamvention-03Hamvention-04

This is a working BC-221-AL signal generator that will more than pay for itself each time I align my BC-348-Q (or any of my boat anchors, for that matter). It, too, was in excellent shape and I couldn’t pass it up at $30.00 (great price as the seller was ready to part with it on the final day of the Hamvention). I love the fact that its reference book and log, with schematic, are fully in tact. Bonus: it has that great vintage military electronics smell.

Surmen DC Digital Voltmeter

Voltage Meter

I picked up this simple in-line volt meter at Universal Radio for $20.

The photo above is enlarged: the actual unit is very small (2.75 x 1.5 x 1 inches). Since my whole DC system is based on Anderson Powerpole connectors, this simple meter will help keep tabs on voltage. I think Universal sold out of these at the Hamvention, but since they build them in house, you can order online.

Side KX panels and cover

Hamvention-10Hamvention-11Hamvention-12I like traveling with my Elecraft KX3, but I worry about the faceplate being damaged in transit. In the past, I’ve used dense foam to protect the front of the radio, but it’s an imperfect solution.

This year, Gems Products was selling their Side KX panels at Elecraft‘s booth in the North Hall. The Side KX handles protrude a good 1/8″ beyond the height of the KX3’s knobs, thus protecting the rig even if turned upside down. I also purchased the clear Lexan cover which fits perfectly on the radio. Now when I travel, I can throw the KX3 in my backpack and not worry about the face being damaged.

At a Hamvention discounted price of $60 with tax, it was no minor purchase, but the investment to protect a $1,200 portable radio was well worth it. I must say, the fit is excellent and installation took perhaps 5 minutes.

Sony TFM-1600W portable radio

Hamvention-02

This Sony was a late Saturday flea market purchase. The vendor–who attends annually and is well known for his gorgeous display of antique tube radios–had this solid-state Sony sitting at the back corner of the booth. It quickly attracted my attention and that of my buddy (and radio enabler) Mike (K8RAT).

Originally priced at $65.00, the vendor was kind enough to let me talk him down (“beg” is more like it, right Mike?) to the $40.00 cash I had left in my pocket.

Once we got it back to our lodging we confirmed what we had suspected: this Sony has incredible audio fidelity and great sensitivity.  No big surprise here: in the 1970’s, Sony was a brand well-known for superb audio fidelity.

This Sony will need a little work–the pots and band switch need a thorough cleaning. Also, the tuning needle somehow came dis-lodged from the fly-wheel mechanism. All of these things can be fixed, though, and I’ll have a superb receiver that should last a few more decades. For a radio built in Japan in 1971, I’m very happy with its condition.

Palstar SP30B Speaker

PalstarSP30B

I’m a sucker for hand-crafted gear. While perusing the flea market, I looked for an affordable vintage speaker for my BC-348-Q, but I couldn’t find one. Inside, however, I spotted this beautiful speaker at Palstar’s booth in the East Hall. I’ve owned a Palstar R30C shortwave receiver before and know how much they care about audio fidelity and overall quality. The SP30B was originally designed for the R30 series receiver.

The wood speaker cabinet on the SP30B is built by a wood worker exclusively for Palstar; the finish is amazing.

The SP30B retails for $99.95 at Palstar.com. I was able to snag this one for only $75 as it was a display and Palstar’s last one with cherry finish.

Miscellaneous items

I purchased a few additional accessories and supplies:

  • Icom ID-51a BP-272Li extra capacity battery from Batteries America: $52.00
  • 75 feet of coaxial cable: $70
  • 8 blemished PowerFilm solar plates: $5

There may have been more items, but I’m calling this a total Hamvention expenditure of $412. 

Did you attend the Dayton Hamvention?  How much damage did it do to your wallet?

Spread the radio love