Tag Archives: QRP Transceivers

Just ordered the new $149/$199 uBITX v 6.0 QRP transceiver

10 Replies

Many thanks to SWLing Post contributor, Pete (WB9FLW), who notes that Ashhar Farhan (VU2ESE) has recently announced the availability of the uBITX v 6.0–as Pete notes, “just in time for the Holidays!“

Pete shared the following message from Farhan:

Here is what [the uBITx v 6.0] looks like :

And of course, you can buy it on hfsignals.com. The shipping will happen from Tuesday onwards. We have a limited supply of the first 200 boards. The rest is for after Christmas.

The most important thing about this revision is that the Radio circuitry is almost unchanged. We have incorporated the connectors on the PCBs. So, this kit needs none of the confusing soldering. You snap in the TFT Raduino onto the main board, plug the power and antenna from the back, snap on headphones, plug in the mic (supplied with the kit) and off you go!

It is offered in two kits now : The basic kit (150 USD) is without the box (like old times) but with a microphone and two acrylic templates for the front and back panels.

The Full kit (199 USD) has the box with speaker, mounting hardware etc. Both are described on the website.

Now, about the TFT display:

For those who are using the 16×2 display and you would like to upgrade, you will have to do three things:

Add a heatsink to the 7805 of the raduino

Buy [here] and hook it up as per [this article].

Grab the new Arduino sketch from https://github.com/afarhan/ubitxv6

Background:

I have been hacking away at adding a TFT display for the Arduino for sometime. Finally, I managed to do this with a really inexpensive 2.8 inch TFT display that uses a controller called the ILI9341. The display update is slow but, clever guy that I am, the display very usable. it uses the same pins that earlier connected to the 16×2 LCD display. This display is available everywhere for a few dollars.

Many thanks, Pete, for sharing this announcement. The price was simply too attractive to me, so I just purchased the full kit for $199 US. (Thanks for being the good enabler you are, Pete!)

Update – 30 May 2020: Many thanks to Armin Sander who notes that the uBITX V6 full kit price has increased to $209 US.

I’ll post an update when I receive the transceiver and assemble it. I do hope this is a workable little radio–it would be pretty amazing for newcomers to the hobby to be able to get on the HF bands for a mere $200 US. I also love the fact that this is all based on open-source, hackable technologies.

Spread the radio love

Initial impressions of the ALT-512 QRP transceiver

5 Replies

So the ALT-512 QRP SDR transceiver has landed at SWLing Post HQ. This little rig is on loan from Aerial-51 and I’ll be spending the next month or so putting it through the paces.

I can already tell that the ALT-512 has some strong points:

  • It’s incredibly portable and easy to take to the field, providing you have a battery and resonant antenna (or external ATU).
  • The color backlit display is quite readable at any angle despite being rather information-dense.
  • I really like the waterfall display. It’s large enough to be quite useful.
  • The ALT-512 can connect directly to your computer for digital modes like FT-8. No external sound card needed.
  • The menu system contains a wide array of features and options for granular tweaks and modifications.
  • The ALT-512 includes the European 4 meter band.
  • Although I prefer using headphones with small radios, the ALT-512’s small internal speaker does a fine job.
  • Rob Sherwood tested the ALT-512 (indeed, this very unit) recently and added it to his receiver test data. It performed quite well especially considering the price.

Any negatives so far?  Nothing major:

  • No internal ATU or battery options. At this price point (799 EUR), I wouldn’t expect either of these.
  • The ALT-512 is not general coverage. This is a negative for those of us who like SWLing, but a positive for ham radio use as the ALT-512 sports band-specific bandpass filters to reject out-of-band strong stations. You can tune to some stations above the 40M band and also the full mediumwave band and below (down to 100 kHz), although I wouldn’t expect stellar performance in those regions.

So far, I’m very pleased with the ALT-512’s performance.

Next, I’ll be taking it to the field and see how easily I can activate a few POTA (Parks On The Air) sites! Stay tuned!

Click here to check out the ALT-512 at Aerial-51.

Spread the radio love

The Omega + HF QRP Transceiver

7 Replies

Many thanks to SWLing Post contributor, Paul Evans (W4/VP9KF), who notes another affordable QRP transceiver on the market: the Omega +.

According to the Omega + website, it appears there are three configurations/versions:

  • 1 band – basic (up to 30 MHz)
  • 2 bands (50 / 70 MHz)
  • 10 bands (160/80/60/40/30/20/17/15/12/10m)

Notes, Specifications and Features

The following details were lifted from this product page and reference the 10 band version of the Omega + (translated from Polish via Google Translate).

Omega + – 10 band QRP transceiver with installed S-meter, power meter, CW monitor and standard quartz filter.

Transceiver fully launched by producers Lukasza SQ7BFS and Pawla SP7NJ.

The front and rear TRX wall in military color, the remaining part of the housing black (in the picture is presented the whole black version).

Rx [MHz]: 0.100 – 72.000
Tx [MHz]:

  • 1.800-2.000
  • 3.500-3.800
  • 5.100-5.500
  • 7.000-7.200
  • 10.100-10.150
  • 14.000-14.350
  • 18.068-18.168
  • 21.000-21.450
  • 24.890-24.990
  • 28.000-30.000

Modes:

  • USB
  • LSB
  • CWU
  • CWL

Antenna connector: SO-239
Working temperature range: -10 ° C to + 50 ° C;
Power supply: 11 – 14V DC
Power consumption

  • Tx Max. Power: 1.6A
  • Rx: 0.26A

Dimensions: (W × H × D) 120x40x180 mm
Weight (approx.): 800g
Output power: (at 13.8V DC)> 6W
Sensitivity: 0.16?V

Package includes:

  • Omega + 10 band transceiver in a black-green (military) enclosure
  • microphone
  • power cord
  • adapter for an external speaker

The listed price is 1,200 Poland zloty (roughly $321 US).

Videos

The Omega + in the WARD Contest 2017:

Click here to view on YouTube.

Here’s a video showing how (impressively) strong the Omega + chassis is:

Click here to view on YouTube.

For more product details, check out the Omega + website.

Our Polish-speaking readers may be able to add more details or clarify/correct anything above that may not have been correctly translated. Please feel free to comment!

Again, Paul, many thanks for the tip!

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

The lab599 Discovery TX-500 ruggedized portable QRP transceiver

23 Replies

Many thanks to SWLing Post contributor, Vlad, who shares some images and a video of a new QRP transceiver in development: the Discovery TX-500 by a company called lab599.

Specifications have not been published yet, but we have confirmed a few details from the manufacturer:

  • 10 watts PEP
  • HF plus 6 meters
  • Weight 570 grams (1.25 pounds)
  • Voltage 9 – 14 VDC
  • 105 milliamps at 13.8 VDC and with backlit display on
  • CAT control via USB and using Kenwood codes
  • I/Q outputs
  • Weatherized
  • Expected availability autumn 2019
  • Target retail price is $700 US
  • Product website is forthcoming

All of the following images came from the Discovery TX-500 gallery on Instagram:

Here are a few videos:

Click here to view on Instagram.

Click here to view on Instagram.

Click here to view on Instagram.

For someone, like me, who loves playing radio in the field (Parks On The Air and Summits On The Air) this looks like an ideal rig. It’s one of the only ham radio transceivers I’ve seen that is weatherized to some degree (how much, we don’t know yet).

I don’t see a speaker on the TX-500, so I’m guessing it might require a mic/speaker combo or an external speaker of some sort? I also don’t see a built-in ATU, but at $700, I certainly wouldn’t expect one.

With a power consumption of 110 milliamps at 13.8 VDC, this little transceiver should run for ages on a modest battery pack.

This is certainly a fascinating prototype QRP transceiver. If the Discovery TX-500 transceiver can be produced and marketed at $700 with all of the features mentioned so far, it should certainly fly off the shelves. They can certainly take my money!

Of course, I will plan to grab one of these for review. I’m also eager to see how this little SDR transceiver might perform on the broadcast bands.

We will post post TX-500 updates and details as they become available. Bookmark the tag Discovery TX-500 and stay tuned!

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

The ALT-512: A new QRP transceiver

1 Reply

There’s a new QRP transceiver on the market: the twelve band ALT-512 by Aerial-51.

At first glance, you’ll see a similarity between the ALT-512 and the LnR Precision LD-11/Aerial-51 SKY-SDR. The LD-11 and SKY-SDR, are very similar, save the LD-11 is marketed to North America (via LnR) and the SKY-SDR to Europe. The SKY-SDR had several iterative upgrades, most importantly the dual-threaded software used in the firmware, which cut CPU latency in half. Both the LD-11, SKY-SDR and now the ALT-512 are made in Europe.

Click here to read my review of the LnR Precision LD-11.

ALT-512 Waterfall display (Photo: DJ0IP)

According to Aerial-51, the new ALT-512 is built on the LD-11/SKY-SDR platform, has the same chassis design but has many improvements over the SKY-SDR:

  • 4m Band
  • 2.4 in. Color Display
  • Improved receiver pre-amplifier
  • 2 transistors in the transmitter PA (was 1)
  • Waterfall in addition to the Pan-Adapter Bandscope
  • 4 additional front-panel buttons
  • User friendly front-panel adjustment of often used parameters (formerly embedded within the software menu)
  • FULL TS-2000 command set implementation
  • Built-in Sound Card; Digi Modes run using only one USB-2 cable connected to the PC. No additional hardware required.

If the ALT-512 performs as well as or better than its predecessor, it’ll certainly be a great little QRP radio.

Pricing has not yet been posted, but Aerial-51 plans to make this transceiver available in the next few weeks.

Click here to check out the ALT-512 on the Aerial-51 website.

Spread the radio love

The HobbyPCB IQ-32: A general coverage portable QRP transceiver with color touch screen now shipping

Leave a reply

Many thanks to SWLing Post contributor, Pete (WB9FLW), who shares the following information regarding HobbyPCB’s much-anticipated portable transceiver which is now shipping.  The price is a competitive $529.00.

The following information comes from the HobbyPCB website:

The IQ32 is 5W output, 80-10M Amateur Radio transceiver with powerful 32 bit processing providing high-end features at an entry level price. The IQ32’s 3.2″ color LCD touch-screen display and dual control knobs provide an enjoyable operating experience in a robust package.

Available for immediate delivery!

Introducing the HobbyPCB IQ32 HF transceiver, based on the high performance RS-HFIQ RF system, the receiver in the IQ32 consists of 5 band-pass filters to reject out-of-band signals, an LNA with frequency dependent gain and a conventional quadrature down-converter. The transmitter features a Class A, 5W power amplifier with individual low-pass filters for each band to exceed FCC requirements for spectral purity.

The IQ32 features a large, color, touch-screen display providing an enhanced user interface and informative spectrum and waterfall displays found on radios costing much more. With a powerful STM-32 DSP processor, the IQ32 transceiver has variable filtering, multi-mode AGC, memory functions, built-in PSK encode/decode with keyboard support.

5W not enough power? Add a HARDROCK-50 to your station to boost up to 50W. The IQ32 and HARDROCK-50 seamlessly integrate together for a powerful mobile/base station!

Simple upgradeable firmware, no connection to a computer required, no drivers, no cables. Simply insert a thumb-drive with the appropriate file and the IQ32 updates its own firmware.

Specifications

  • Frequency Range: 3-30MHz (performance guaranteed on 80/60/40/30/20/17/15/12/10M ham bands)
  • Sensitivity: MDS < -128 dBm on 80M dropping to < -135 on 10M
  • Noise Figure: < 8 dB
  • TX Power: 5W typical, 4W minimum
  • LO Feed-thru: < -50 dBc @ 5W output
  • Spurious and Harmonics: < -50 dBc typical
  • DC Power: 13.8VDC, 2 amp max
  • Size: 172mm x 105mm X 75mm
  • Weight: < 700 grams
  • Display: 3.2″ Color LCD Touchscreen
  • Modes: USB, LSB, CW, PSK 31
  • DSP Processor: STM-32, 32 Bit

Click here to download the manual.

Pete also notes:

If one already has the RS-HFIQ board fear not an upgrade kit is available:

https://hobbypcb.com/products/hf-radio/iq32-upgrade

Thank you for sharing this, Pete!

I may see about grabbing an IQ-32 to evaluate. I’m very curious how its receiver might stack up to the Elecraft KX2, the CommRadio CTX-10 and the LnR Precision LD-11. (Please note that these links lead to my other radio site, the SWLing Post.)

It doesn’t appear that the IQ-32 has an AM mode, but I would still like to see how it might handle broadcast listening on the shortwave meter bands using ECSS.

I love the portable form factor and the fact that it ships with stand-off handles to protect the front face of the radio.

Video:

Check out WA2EUJ’s IQ-32 presentation from the 2018 Hamvention on YouTube:

Click here to check out the IQ-32 product page at HobbyPCB.

Have any Post readers purchased the IQ-32?  Please comment!

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support is greatly appreciated. Thank you!

Spread the radio love