Tag Archives: Scarrafone

Scarrafone 2.0: The Homebrew Antenna Evolves

Screenshot

Many thanks to SWLing Post contributor Giuseppe Morlè, who writes:

Dear Thomas and friends at the SWLing Post,

This is Giuseppe Morlè, IZ0GZW, from Formia, in central Italy on the Tyrrhenian Sea.

In this video, you’ll see the evolution of the “Scarrafone” antenna—this is the Scarrafone 2.0!

I’ve held onto this coil for many years; it was a gift from a friend.

I figured I could improve upon the performance of the previous Scarrafone… and I was right!

A larger coil diameter and an 800 pF variable capacitor make all the difference.

I’ve placed seven screws along the coil to help with tuning across all HF bands.

I didn’t have a proper knob, so I used a sparkling wine cork instead—it works perfectly!

It’s truly an amazing antenna for portable use, and finding the right tuning points is actually a lot of fun.

I hope you all enjoy it!

An update: Adding medium-wave reception

I’ve also made another improvement to the Scarrafone 2.0 antenna by adding another coil for medium-wave reception.

It consists of a plastic electrical conduit pipe containing three ferrite cores, with 30 turns of wire wrapped around it.

At the ends of the windings are the usual alligator clips, allowing me to switch between shortwave and medium-wave reception.

This second video was filmed inside my shack in the early evening.

Thanks, and greetings from Formia!

73,
Giuseppe Morlè, IZ0GZW

The €5 Scarrafone: Giuseppe’s Clever Recycled Antenna

Many thanks to SWLing Post contributor Giuseppe Morlè, who writes:

Dear Thomas,

I’m Giuseppe Morlè from Formia, in central Italy, on the Tyrrhenian Sea.

This is a creation of mine from 2013, made entirely from recycled materials—it’s a manual antenna tuner for my QRP gear.

Today, I pulled it off the shelf and used it as an antenna itself.

I’ve dubbed it the “scarrafone” (cockroach) antenna.

In the Neapolitan dialect, “scarrafone” means cockroach; since it bears a resemblance to one, that’s the name I gave it.

Even I was surprised by how well it performs as an antenna.

It features a coil made of aluminum wire, equipped with an alligator clip used to find the optimal tuning point.

There’s a 1000 pF variable capacitor, and on the side, an additional banana jack where I can plug in a random-wire antenna to boost the received signal.

The “scarrafone” works very well—even without the random wire—across all HF bands; you just need to find the right tuning point.

On the lower bands, the entire coil is used, adjusted via the variable capacitor.

You can see it in action on my YouTube channel:

The only expense I incurred was 5 euros for the capacitor; everything else is recycled material.

The “scarrafone” works great with portable radios, such as those from Tecsun and others.

I hope this might be of interest to all of you.

Best regards to you and all the friends at SWLingPost.

73, Giuseppe Morlè (IZ0GZW)