Tag Archives: Tecsun BCL-3000

The Tecsun S-8800: A new receiver in the works


SWLing Post contributor, OWL, writes:

It seems that Tecsun has a new large portable in line.

Someone posted a photo of a new Tecsun product catalogue which shows a new model S8800.

The Tecsun BCL-3000 for comparison.

The Tecsun BCL-3000 for comparison.

Apparently it uses the housing of BCL3000 [see above] and is multiple conversion (so a PL880 inside?), DSP based with separate LSB/USB and 10Hz minimum tuning step, and comes with a remote control (for direct frequency input?). Two 18650 batteries are used.


Photo source: http://bbs.tecsun.com.cn/ via OWL. Click to enlarge.


Photo source: http://bbs.tecsun.com.cn/ via OWL. Click to enlarge.

[Here’s a] link to the post in Tecsun’s web forum:


Many thanks for sharing this find, OWL! This is a very curious development from Tecsun.

I can imagine why Tecsun is re-using the BCL-3000 (a.k.a. Grundig S350DL) body–not only is it roomy inside, but it’s proven to be a popular large portable form factor over the years. Of course, since this is an existing chassis design, design/development costs will be minimal.  If Tecsun is including a remote, I’m sure OWL is correct: it’ll aid with direct frequency entry. The S-8800 will be the first portable shortwave radio with remote control I’ve seen in many years.

If audio is anything like its predecessors, I would expect rich fidelity from the built-in speaker. In terms of performance, though? This is a completely different receiver than the single-conversion BCL-3000, so only time will tell.

Spread the radio love