Icom’s announcement includes two new receivers: the IC-R8600 and IC-R30

The IC-R8600 (Photo source: QRZ Now)

The IC-R8600 (Photo source: QRZ Now)

Many thanks to SWLing Post contributor, Dave Zantow (N9EWO), who shares the following info about Icom’s announcements at the Tokyo Ham Fair:

Well the cat is now really out of the bag now !! Icom announced 2 new RECEIVERS at the Tokyo 2016 JARL Ham Fair.

We can almost say for certain that the new IC-R8600 is a SDR based design.

[…]The new IC-R30 handheld probably is SDR too, but not sure yet. Pretty large bugger (no real good picture as of of me typing this). Will it be able to do at least P25 Phase one?

I’ll admit it: I was a little surprised to hear that Icom had announced new receivers. I’m happy to see that it’s an IC-R8500 replacement/update. I love the touch screen color display.

I also very much like the idea of a handheld wideband–possible SDR–receiver.  I did a little extra digging and found the most concrete details about the new models on Icom UK’s website:

After an online teaser campaign featuring silhouettes of mystery radio models, the secret is out and Icom Inc. has shown the very first samples of the IC-7610, IC-R8600, IC-R30 and ID-51 PLUS2 to the public at the Tokyo Ham Fair 2016 (August 20-21, 2016). Details are relatively scarce but here are the basic details we have so far on these models.

The new IC-7610 (Photo: Icom UK)

The new IC-7610 (Photo: Icom UK)

IC-7610 HF/50MHz Transceiver (Base Station)
The IC-7610 is the successor to the IC-7600 and will be a dual-watch capable HF+50MHz 100W base station with built-in antenna tuner. The LCD will be touch screen and you will be able to connect an external display.

IC-R8600 Wideband Receiver (Base Station)
The IC-R8600 replaces the IC-R8500 wideband receiver and will feature the technology incorporated into Icom’s best selling IC-7300. The IC-R8600 will be able to receive a wide frequency range from 0.01-3000MHz frequency in analogue and various digital modes (D-STAR, P25, NXDN and dPMR). The IC-R8600 will feature a larger 4.3 inch touch screen display which will feature fast moving spectrum scope and waterfall display.

IC-R30 Communications Receiver (Handheld)
The IC-R30 is the successor to the popular IC-R20 compact handheld receiver. The IC-R30 can listen to two signals under certain conditions (analogue + analogue or analogue + digital). The IC-R30 will be able to decode D-STAR, P25, NXDN and dPMR digital (conventional) modes.

ID-51 PLUS2 Dual Band D-STAR Digital Transceiver (Handheld)
The ID-51 PLUS2 handportable is a special edition model which will come in several colours/patterns. The new ‘Terminal Mode’ and ‘Access Point Modes’ enable you to make D-STAR calls through the Internet, even from areas where no D-STAR repeater is accessible.

More details will be available nearer to each product’s launch. There are currently no details about pricing and availability.

Stay tuned to this website and our social media pages for further announcements.

I can’t wait to learn what the price point will be for the IC-R8600. I hope it’s at least in-line with the IC-7300 or (its predecessor) the IC-R8500. I also hope that, perhaps, the new IC-R30 will have full-mode HF capabilities.

We’ll post news about these new rigs as it becomes available–so will Dave Zantow. Stay tuned!

Spread the radio love

8 thoughts on “Icom’s announcement includes two new receivers: the IC-R8600 and IC-R30

  1. 13dka

    That’s certainly bad news for me. I (guess I) WANT THEM ALL!!! 🙂 Standalone SDR receivers and wideband handhelds with shortwave SSB always caused me severe G.A.S. (Gear Acquisition Syndrome) seizures, alas the latter could never deliver even mediocre performance below VHF and rarely excelled as scanners above so far, if that’s really a SDR design (I kind of doubt that) that would be quite promising.

    Reply
    1. Dave AA7EE

      It’s funny you should say that Tony, because I’ve had similar thoughts about many of the newer radios on the market from the big manufacturers. I don’t think it matters to most hams and SWL’s, but many of them look to me, well, how do I say this – a bit “blingy”. Like you, I’m not keen on the design aesthetics of the 8600 but luckily, I am not the target audience for this receiver!

      Reply
    2. Mike N0TLD

      Fully agree. I hope it is a fantastic performer, and best of luck to Icom and anyone who buys one, but the latest models (of sw/wideband receivers *and* amateur transceivers!) from the main manufacturers over these past years have just been flat out drab, plain, ugly. I understand that as things move in the SDR direction, functions will be more and more menu-based, and the need for individual knobs and buttons minimized, but it all just looks CHEAP. Even if it is supposed to be the latest, greatest touchscreen high tech whatever, it just looks like an iPhone, nothing unique or desirable about it to me. I already HAVE a tablet and a phone. In my radios, I like to have a RADIO.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.