Escaping the noise while traveling

A Sony SW100, a PK Loop, and a pint of L’Écurieux brown ale. Lovely trio!

If you’re a regular Post reader, you’re probably aware that I enjoy a relatively RFI-free environment at my rural mountain home. RFI-free living is something of a luxury, even though our rural location also equates to appallingly slow Internet service.

But unfortunately, when I travel, I usually find that I’ve traded my RFI-free atmosphere for the chaos of noise-ridden bands. If you’ve ever stayed at a modern hotel and tried to tune to anything on mediumwave or shortwave, you’ll know just what I mean.

We’ve spent this summer, like last, near Québec City, Canada.  Near this fairly large city, I’ve been greeted by more than enough RFI to make up for the lack of RFI most of the year.

I attribute the atrocious RFI to the number of light dimmers the developers put in this condo complex and the proximity to a field of noisy electrical poles. Of course, all of the unregulated power supplies in the area don’t help, either. It’s a jungle of noise.

The PK Loop

Last year, I purchased a PK Loop portable HF loop antenna (about $150 on eBay)–specifically with hotels and this very condo in mind. I must say, it has been a welcome travel companion on this trip.

The Elecraft KX2 and PK Loop

While the PK Loop seems to pair well with my Sony SW100, I also love using it with my Elecraft KX2 for SWLing.

Sadly, the PK Loop doesn’t provide the noise mitigation of a large wideband mag loop antenna–like a Wellbrook or Pixel Loop–but it does lend itself to excellent portability and takes the edge off the noise.

While it’s easy to do my radio listening in the condo from a comfy chair, in reality, it limits what I can receive in a serious way. The 31 meter band, for example, is so heavily submerged in RFI that only the strongest stations can punch through (for example, Voice of Greece, Radio Romania International, WRMI, WBCQ, Radio Havana Cuba, China Radio International).

So, what can I do?

Hit the field, of course!

That’s right. Taking a page from the books of SWLing Post contributors London Shortwave and Clint Gouveia, I realize I can simply leave the RFI behind and seek a sound, radio quiet spot for SWLing/DXing!

My listening post last year–during the BBC Midwinter broadcast–in the parking lot of St-Anne-de-Beaupré basilica.

Over the past two months, I’ve taken time to escape the RFI and do a few live listening sessions and spectrum recordings in the field. I’ve always got my SDRplay RSP, Elecraft KX2, and Sony ICG-SW100 at the ready. In terms of wire antennas, I’ve deployed my NASA PA30 and even my QRP Trail-Friendly EFT, with good results.

Listening to the 2017 BBC Antarctic Midwinter Broadcast from the back of my vehicle in Saint-Anne-de-Beaupré, Québec, Canada.

I’ve also been experimenting with the homebrew Miniwhip antenna that SWLing Post contributor, Steve Yothment, provided earlier this year, based on the design used by the U Twente WebSDR. As Guy Atkins recently demonstrated, miniwhip designs do require some distance from sources of RFI, however.

The field is your friend…

Just a friendly reminder that if you live in an RFI-dense environment, you can certainly design a system to help mitigate RFI at home. After all, home is where you likely spend the bulk of your free time.

View of the Saint Lawrence River from my back-of-the-minivan listening post.

But, again, the easiest way to substantially increase your chances of snagging DX stations is to simply hit the field.

Join me in giving it a try. Find an RFI-free location with access to a couple of trees to hang a simple wire antenna–say, in a park, at the side of a rural road, on a friend’s farm…and if you find the listening good, make it your radio get-away. You’ll likely find that your portable shortwave radio can outperform your at-home tabletop receiver simply by removing yourself and your radio from the noisy environ of indoors.

When you first start doing radio in the field, it might feel a bit awkward–especially if you’re taking more than a portable shortwave along for the ride–but you’ll soon enjoy the fresh air ambiance and maybe even prefer it to indoors.  Even if you’re in a public setting where curious passers-by may want to know what you’re doing, as they undoubtedly will…When questions arise, take a (brief!) moment to educate your questioner(s) about the fascinating and nearly-forgotten world of shortwave radio––maybe you’ll inspire others to listen in, too.

And trust me: once you’ve been to the field a few times, you’ll start to look forward to playing radio in the great–and noise-free–outdoors!

Spread the radio love

4 thoughts on “Escaping the noise while traveling

  1. Clint Gouveia

    Great article Thomas! I’ve always been an advocat for getting out on DXpeditions because ultimately it’s all about signal-to-noise…and the cheapest and often, most efficient way of achieving this is to simply get out there! 73! Clint

    Reply
  2. Tom Reitzel

    Regarding wide-band magnetic loops, I’d like to see their diameter shrink to 2′ from the standard 3′. Although, it wouldn’t help much for the sake of portability, it’d be less cumbersome indoors. Furthermore, wide-band magnetic loops such as AOR’s LA-400 with its 1′ diameter loop would be much more suitable for traveling. A portable and collapsible wide-band magnetic loop of 1′ diameter would be ideal for traveling. More innovation needs to occur with smaller, wide-band magnetic loops. Hopefully, competition would then drive down the price as well.

    Reply
    1. RonF

      As always, though, it’s a matter of efficiency being related to size, and for various reasons it’s not necessarily linear with scale. I’ve experimented with single-turn SW loops of various sizes, both amplified & unamplified, & my impressions are (a) there’s not really much difference between 1′ and 2′ amplified loops in terms of either signal-catching or noise-immunity, at least on the lower SW bands where noise is higher, and (b) there are dramatic improvements in both as you go from 2′ to 3′.

      Not to say it wouldn’t be worthwhile in some cases, but my personal experience is that a 3′ tuned loop out on the balcony is a much better proposition all-round than a 2′ amplified loop inside – absolute signal level is lower, of course, but SNR is dramatically improved. YMMV though, and I’d absolutely recommend building one and trying it – I think one of Chris Trask’s papers has some details on a ~2′ loop.

      And I concur with Thomas – the PK loop is a fine travel loop (I’ve got one myself!), but really needs to get out from under the noise to perform at its best. So step outside!

      Reply
    2. Samuel Rhine

      Sony used to make an AN-LP1 that was perfect for that. Came with a little toroid filter you could put in line for additional noise reduction

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.