Many thanks to SWLing Post contributor, 13DKA, who shares the following guest post:
From Belarus with love: The Belka DSP
by 13DKA (international man of mystery)
I do have a thing with tiny radios. However, the Belka DSP is so very, very tiny and disguised in understatement that it squirreled itself out of my sight for a while. There wasn’t a lot of information when I took notice of its existence last year, having to order it from a Cyrillic script website prevented an impulse purchase and to be honest, I didn’t think that a shortwave receiver so small could do anything as good or even better than the radios I already own. Then, when this fine blog spread the news about the Mobimax.bg shop in Bulgaria offering this radio, I started another research and I learned that I’m not the only one who had some serious misconceptions about the little squirrel. (“Belka” = “squirrel” in Russian).
The outside: Spy radio reloaded
Admittedly, the tiny metal box with 4 buttons and a (metal) knob, antenna, headphone and a micro USB jack on the side, bringing less than 100 grams onto the scale, in a size that could make this radio as hard to find as your car keys may look like something that must have traded functionality for size. This is no doubt a solid little piece of gear though, one that doesn’t try to be anything but functional.
The form factor could be described as “bigger than a box of matches but smaller than a pack of cigarettes” to the ex- and still-smokers, and the elderly people among us who watched all the classic spy flicks out there may inevitably associate it with “spy radio”. It’s not quite 007’s clothes brush communicator or the U.N.C.L.E. pen radio but it would sure beat classic spy radio equipment which could be anything from a suitcase full of electronics to small boxes with comparatively few transistors in it, and they all wouldn’t have lasted much longer than it takes to be killed by 007 before the batteries would run out of juice.
The Belka DSP is very different from those, while it could possibly be smuggled into the country in a shoe heel, it boasts an endurance of 18h and it consists of 100,000s of transistors due to its highly integrated and low-power consuming electronics. These innards deserve some examination, because there seems to be some confusion about the nature of this radio out there on the interwebz:
Much bigger inside – technicalities:
It seems that some people read “DSP”, see the price and automatically dismiss it as yet another SiLabs 473x radio like many of the bargain Chinese shortwave portables, and the Belka’s miniscule size may suggest that it might not be the best of them either. Some presumed it’s based on an RTL chip… but that’s all as far from the truth as it gets. For starters, said Chinese radios, albeit digitally controlled, are actually still “conventional” analog radios which employ digital signal processing only at some varying later stage in the circuit and use only parts of the many features provided by the SiLabs chip (of which DSP is only a part), some even still rely on analog ceramic IF filters and use the chip only to provide AM/FM (e.g. PL-6xx). If they do use the DSP features, that’s how some end up as “triple conversion” receivers – 2 conventional IF stages with a 3rd, DSP IF stage – and some common quirks.
The Belka DSP, on the other, hand is not exactly a conventional radio to begin with but a basic (“direct conversion”) SDR. If I interpret the information on this site correctly, the only Silicon Labs chip used is a Si5351A multi-clock generator to provide high-precision oscillators to be fed into some TI chips serving as the quadrature detector/mixer, their output is then processed in a pretty decent ADAU1761 audio DSP (24-bit AD/DA), a PIC is controlling all that, and a 1W audio amplifier IC (TS4890) is providing the needed power to drive headphones or a passive external speaker directly. One comment somewhere was putting it in the same category as the Commradio CR-1 and while there’s some truth to it in some way, that’s not quite right either because the Belka DSP doesn’t use some pre-fabricated and re-dedicated TV tuner chip. While the functional principle may be similar, the Belka is made out of “discrete” components.
The different architecture also explains why it has so little in common with the Chinese DSP radios, there’s no muting, chuffing or hissing, no “softmute” or similar slightly malfunctioning attempts at making the radio appear quieter than it actually is, no distortion due to a seemingly uncurable lazy AGC… Instead, everything is predictable, precise (frequency!) and quiet and it behaves and sounds like a classic communications receiver or any reasonable piece of modern ham radio gear.
The Belka DSP ships with a detachable (BNC) 74cm/29″ short telescopic whip, and the receiver is said to be designed to develop full sensitivity with that whip. This may be raising some apprehension about how it would perform on full-sized antennas, but most of the YouTube videos about this radio demonstrate it with all kinds of passive and active antennas and (almost) surprisingly the Belka DSP appears to cope just fine with them, which in turn made me concerned about how good it could be on its whip – I mean it can’t be super-sensitive on a whip and have a decent dynamic range and be cheap all at the same time, right? How does it compare to the typical Chinese portables it’s being confused with? Do I need this radio anyway?
Q would be jealous – performance
Meaningful technical data beyond what’s provided on the purchase pages is hard to find. For example, Fenu Radio has listed the MDS (= minimum detectable signal) threshold as “-135 dBm” (without stating a source), whereas MDS was possibly taken synonymous for noise floor. A Russian YouTube radio channel seems to have actually measured an excellent sensitivity of 0.16µV on 40m in SSB. These would be rather typical figures for such a design and that would make it a quiet and sensitive radio indeed.
My other portables, on the other hand, don’t come with any specs beyond frequency range and features and the proof is in the pudding anyway. Let’s go north by northwest (the correct compass point name would be “northwest by north” BTW) to the secret 13DKA proving ground at the dike to find out if it shows!
Actually I took it to the dike on several days/evenings/nights during the past 4 weeks to test it under varying conditions, to compare it with different radios and to serve as a nutrition source for the local lady mosquitos. The first one I took to the dike was my XHDATA D-808, it seemed like a natural candidate to compare with the Belka because I would use both in the same role – as a very sensitive “wearable” shortwave receiver to carry around on walks. To summarize that quickly – while the D-808 is already a sensitive radio, the difference between the two is represented pretty well by this short audio clip I picked out of many – this is Radio New Zealand International on 13840 kHz, 2 hours before midnight local time (UTC +2):
[No time indications needed here. The portions with mostly noise: D-808, When you hear someone talking: Belka]
So the Belka won the competition for the intended purpose already and it wasn’t exactly a “photo finish” either…mission accomplished, case closed, end of the review, thank you for reading. But… how would it compare to the S-8800, the most sensitive and quiet of my Chinese DSP radios? I felt like this would be an unfair comparison, I mean c’mon, the Tecsun’s whip is almost twice as long as the Belka’s…
So to level the field, I compared them with my favorite lazy makeshift antenna: A few meters of litz wire coupled (inductively) to an old 24ft steel flagpole on my “proving ground”, connected to the radios with a short stretch of coax to shield the “hot” wire inside the car. Not exactly a proper antenna but it would do to compare the radios better and I used this contraption to boost signals (a lot!) in the past years with great success. Indeed, the radios performed very similar on this contraption in terms of sensitivity, so there was no clear winner in this regard. Then on a hot, sunny day I decided to spend the afternoon at the beach with the Belka and the other radios, this time letting the Belka and the S-8800 run against each other on their whips only. To my surprise, the beneficiary of the external antenna the other day was the Tecsun, not the Belka! But let’s break this up into the different modes:
On the Belka DSP, “15,000 kHz” means 15,000.000 kHz, not 15,000.030 or 14,999.790 or worse, no matter how you shake it or where you touch it, it’s dead-on on WWV or many well-maintained broadcast transmitters and calibration or regular retuning is not necessary. Of course it doesn’t have trouble suppressing the other sideband, LSB and USB sound and behave absolutely identical/symmetrical and demodulation, even of strong stations is free of artifacts. This is SSB (or ECSS) reception how it’s supposed to be.
Of all my Chinese portables, only the S-8800 could come close to that “analog” feeling when turning the VFO knob, or particularly its fine-tuning knob with 10-50Hz steps …if that fine-tuning knob wouldn’t cause a terrible frequency jitter while tuning and if the AGC wouldn’t cause clipping and if the BFO had even remotely the stability of the Belka. In the following audio clips you may notice that the Tecsun is slightly off frequency most of the time – after retuning the radio for the 10th time because the sun sets and the air temperature is dropping slowly, I usually stop caring about that.
These clips were all recorded with the S-8800 @2.3 kHz and the Belka @2.4kHz bandwidth. Please, if you really want to hear the differences do yourself a favor and use some headphones or external speakers with some decent bass response, otherwise the important bits may get lost (like on my laptop speakers):
– This is the Gander/NY VOLMET on 10051 kHz the night I used the external antenna:
[0:00: Tecsun, 0:15: Belka]
– Here’s Argentina (LU6FOV) in QSO with Scotland (GM1DSK) on 20m around midnight:
[0:00: Tecsun, 0:18: Belka]
– Same band, a ham in Louisiana later that night:
[0:00: Tecsun, 0:15: Belka]
– 75m after midnight, ragchewing guy from NC on 3927 kHz (alas a noisy band at this time of the year):
[0:00: Belka, 0:15: Tecsun, 0:30: Belka]
Here are a few clips with the radios only using the whip, both recorded on 20m around sunset, when the atmospheric noise was finally going down and the band was slowly closing, at least for north-south propagation paths. Like I mentioned above, the Tecsun with its long whip and great independency from a counterpoise etc., clearly won the comparison with my other portables a few years ago and I was really expecting it to beat the Belka.
– ZS1OPB near Cape Town, South Africa in QSO with an unknown OM, possibly in Scandinavia or Germany. The latter has a pretty borderline intelligible signal, and it shows when switching to the Tecsun:
[0:00: Belka, 0:13: Tecsun, 0:21: Belka, 0:33: Tecsun, 0:41: Belka, 0:48: Tecsun, 0:56: Belka, 1:15: Tecsun]
– Here’s KB3RHR calling CQ even later on 20m, which had just dropped into the quiet period between daytime and the South America route greyline enhancement:
[Again, no time indication needed!]
CW is another mode where the Belka shows how it’s different in that it has a dedicated CW mode to begin with. Most of the portables based on a SiLabs 4735 come with typical CW filter bandwidths like 500Hz, but to receive CW you may have to switch to USB, then to the proper bandwidth first. The Belka DSP has a dedicated CW mode doing these settings for you and a way, way superior 300Hz filter. The passband of that filter can be shifted in 100 Hz-steps between 500 Hz and 1 kHz to match your favorite tone pitch. CW reception is like you’d expect it from a regular ham RX/TRX, proper AGC action, proper filter, no artifacts, clean tone. Tuning through the band with 10, 50 or 100 Hz steps is smooth, quick, easy and fun. While there are of course tiny QRP transceivers particularly for CW, I’m almost sure that this level of CW goodness in such a small general coverage all-mode receiver hasn’t been seen before.
Here’s all 3 radios in one go. I deliberately picked a frequency with someone producing terrible clicks to the left and another pretty loud station to the right:
[0:00: D-808, 0:08: Belka 0:16: D-808, 0:21: S-8800, 0:40: Belka]
I think it’s awesome that the multi-banders kind of cover CW now but as you can likely hear, CW is also where the inherent (chip-related) and newly acquired (wanderlusty BFO on the S-8800) shortcomings of the Chinese radios are most obvious. Both distort on the onset of AGC action of course and turn a pure-ish sine CW signal waveform into some more square-ish shape thereafter and their “500 Hz” filters are letting a lot of signals through from beyond the filter slopes, which makes me think that setting is maybe not really meant to be used for CW. In the Tecsun example at 0:21 I had to use the fine-tuning knob and you’ll also hear the S-8800’s strange quirk with trying to mute the audio, despite soft-/automute is being turned off in the “hidden” settings. The D-808 is less quirky and very stable but using the fine-tuning knob to scan the CW segments on the bands is rather tedious with it, because it doesn’t tune the radio continuously and just jumps back to -99 on the same frequency once you reached +99.
When I saw this on the specs list, I thought this must be some error. On second thought it was pretty obvious: A proper shortwave receiver designed by a ham (Alex, EU1ME) for hams (among others of course) must be capable of receiving the local 10m-band FM repeater and of course you could also enjoy European 40-channel CB radio with that. Many ambitious tabletop receivers of the past had that option too. While this is nice, a squelch is more or less mandatory for FM or the listening pleasure will have its limits, and the Belka DSP does not have one. Unfortunately the next FM repeater is too far away, so is the next proper 10m-band opening and to receive any CB (apart from freebanders worldwide around 27,555 kHz USB) in my neck of the woods I have to be very, very lucky and I never managed to hear anything local with any of the portables. By coincidence, on the 2nd test evening on the dike I did pick up some CB stations in FM with the Belka and it did a great job, given the faint (but domestic) signals I got out there. So, the FM function was unsurprisingly tested OK and much more surprisingly, the FM noise is rather untypically unobtrusive.
Noteworthy: NFM has the same filter options as the other modes, so unlike aforementioned receivers with FM option or a dedicated CB radio, you can try a narrower filter setting which can improve SNR on FM (at the cost of some more distortion) in order to dig a weak station a bit more out of the mud.
Receiving international SW broadcasters is what almost all, even some particularly cheap SW portables do quite well. Of course, like any decent receiver aiming for demanding hobbyists, spies and other commercial users alike, the little squirrel is even apt for more elusive DX, due to its versatile filters, stability and sensitivity. On top of that it sports what the manual calls “pseudo-synchronous detection”. I can foresee people misunderstanding this, so I think this could use a bit of an explanation:
Alex likely didn’t use this somewhat unwieldy term for no reason, instead of just putting a slightly misleading “sync detection” on the feature list: To put my limited understanding in simple words, regular sync detection is extracting the modulation content from the carrier, then replacing the original carrier that was battered by the ionosphere with a phase-locked, fresh and stable one from an oscillator, and finally bringing that back together with the modulation content.
“Pseudo sync” does the same except it doesn’t use an oscillator and a phase-lock-loop to recreate the carrier, instead it regenerates the original carrier by squashing it in some limiting amplifier to stabilize it and remove the modulation content. This is a quite smart and parts-saving arrangement and it’s inherently in phase with the signal. But that also means the original carrier must be somewhat intact, the less damage it has taken the better, while the “true” sync detector doesn’t rely on the original carrier and the signal can be reconstructed as long as modulation could be extracted.
That explains why recovering ultra-weak and downright broken signals from clandestine stations at the other end of the globe may not be the strength of a “pseudo-sync” detector, on the Belka it may even desensitize the radio and you will hear less than without…unless the opposite happens. Like with any sync detector I’ve tried so far, sometimes it works, sometimes it won’t. What always works is improving reception of stations that still have some headroom, mitigating phasing effects and making it generally a little more comfy to listen to and I think the Belka’s sync detector does that very well but unobtrusively. It’s usually hard to asses whether or not a sync detector helped with a particular dip in the signal or not, unless you have 2 specimen of the same radio to record their output simultaneously and compare.
ECSS (Exalted Carrier Single Sideband)
Besides the “pseudo-sync” detector, the Belka’s excellent frequency precision and stability also makes the technically similar sideband-reception of AM broadcasts a no-brainer: Just switch to USB or LSB and if the transmitter itself isn’t badly off frequency, that’s all you need to do because the radio is dead-on on the frequency, LSB or USB.* Since the available filter settings are the same for all modes (other than CW), you can also use the widest filter setting for maximum fidelity in ECSS. In comparison, all of the Chinese portables I have (and most if not all of the Chinese, Korean or Japanese portables I owned in the past) need some fine tuning to zero in on the station, each meter-band and each sideband their own setting and some just lacked the stability to stay zeroed in.
*With a tuning resolution of 10Hz, it’s technically impossible to entirely “zero-beat” a station with an offset other than exactly 10 Hz or multiples thereof. However, a small residue beat of a few Hz isn’t that bad and the ability to select the sideband suffering the least interference, the recovered modulation content and the decreased noise through narrower bandwidth still make ECSS a great way to improve reception.
AM reception examples
…beginning with some clips captured using the external antenna:
– This is RHC 5040 kHz, shortly after fading in after midnight local time, followed by some music from Radio Rebelde on 5025 kHz. The Belka’s 2.4 kHz filter setting has not only 100 Hz more bandwidth but also a much more presence-friendly shape than the Tecsun’s rather muffled sounding 2.3 kHz filter. The other notable difference is some high frequency hiss the Tecsun likes to emit, it becomes more evident when the channel noise doesn’t play such a significant role anymore, like on AM:
[0:00: Belka (RHC), 0:15: Tecsun (RHC), 0:29 Tecsun (R.Rebelde), 0:43: Belka (R.Rebelde)]
– Next is CHU 7850 kHz. While CHU is technically transmitting AM with one sideband suppressed (H3E) I threw those in this category, even though at the end I switched the radios to USB to demonstrate the SNR gain this means for both radios:
[0:00: Tecsun (AM), 0:17: Belka (AM), 0:34 Tecsun (AM), 0:51: Belka (AM), 1:06: Tecsun (USB), 1:21: Belka (USB)]
– CHU again, but now on a late afternoon on 14 MHz with really bad condx and with the radios [b]using their whips[/b]. Unfortunately I lost the clip with the Tecsun in USB but if you consider how little CHU you hear from it in AM, you can probably imagine that it wasn’t that much better in USB:
[0:00: Belka (AM), 0:12: Tecsun (AM), 0:21 Belka (AM), 0:34: Tecsun (AM), 0:48: Belka (USB)]
– Finally 2 clips (again using the whips only) taken from a German station with the imaginative moniker “Shortwave Radio” (www.shortwaveradio.de) transmitting from a site little more than 100 miles from here on 3975 kHz, in the afternoon. Despite the station being so close to my QTH, there’s some pronounced fading on it that makes the Tecsun suffer a bit more than the Belka:
[Left channel: Belka, right channel: Tecsun]
– Same station, but now with both radios switched to wide filters (4.7 on the Belka and 4.0 on the Tecsun):
[Left channel: Belka, right channel: Tecsun]
It’s very subtle but I find the Belka presents AM signals with less harshness and distortion and a more “solid” feel to it. Please note that these clips were recorded with a cellphone (with some decent built-in stereo mic though) and I used my CC Radio 2E as a powered speaker for the speakerless Belka, which is admittedly a great combination.
The Belka has one variable IF filter, whereas both low and high cutoff frequencies can be adjusted for each mode individually and will be memorized for SSB, CW, AM and NFM individually. If you ever played with a more recent SDR, you’ll know what to expect from the filter.
While this perceived superiority over conventional filters may be subject to heated discussions among radio connoisseurs, it will beat whatever cheap ceramic filters usually ended up in consumer-level portables and low-end to mid-range tabletop shortwave receivers and it also beats what the aforementioned Chinese DSP radios have to offer in filter quality and flexibility. For example, those come with pre-defined settings, with arbitrary, varying and not always great sounding filter shapes and lower filter skirts tending to roll off the signal a bit too high for my taste, which can be both an advantage and a disadvantage depending on the signal: Some ham operators put considerable amounts of energy into a fat sounding bass. With a filter roll-off around 200 Hz and a weak signal, only a small remainder of modulation will make it to the speaker and you may not even notice that there’s a station while you tune the band*. With the filter reaching down to 100 Hz or even lower, that station’s existence will be immediately obvious and the now more complete modulation content could even be somewhat more intelligible. On the other hand, when splatter from a neighbor channel is creating a lot of rumble you’re happy if the lower edge of the passband can be shifted upwards.
What the Belka’s filter doesn’t quite match is the variety – some the latest China-portables have many presets including 1.7, 1.2 and 1 kHz while the lowest upper filter frequency you can get on the Belka DSP is 2.4 kHz. While this is consistent with common ham radio rigs, I find a filter <2 kHz quite useful on crowded SSB bands. Given the great presence and intelligibility the 2.4 kHz setting provides and the filter not entirely (95%) passing my “4XZ” test, where the filter has to suppress 4XZ’s CW signal on 6407 kHz while the radio is tuned to 6604 USB (Gander/NY VOLMET), maybe 2.3 kHz would have been better for optimum (but in the ham bands very theoretical) channel separation. This is some high level nitpicking for a radio that costs less than one plug-in filter for a Japanese transceiver though.
In AM, the shown filter bandwidths are per-sideband like on some other DSP radios, which equals “audio bandwidth”. That means you have to multiply the number by 2 to get an AM IF filter bandwidth figure comparable to conventional radios with “tangible” filters, the 2.4 kHz setting would be a 4.8 kHz filter and 4.7 means 9.4 kHz.
The Belka has a properly working AGC, but it seems to reflect the radio’s emphasis on SSB: It has a fixed, slow release constant for SSB reception and that appears to be in effect also on AM. Actually, the AGC release time is quite slow (2+ seconds?), just as slow as I would have preferred it if I’ve had a choice, however, this can turn out less than optimal in rare cases of fast fading intervals on an AM station. But that’s still way better than having to live with a fast AM AGC setting on SSB, and it doesn’t really diminish the general AM listening experience with the Belka for me, which I find quite a joy. Being able to listen to SSB stations without compromises for a change and not having to cut the radios some extra slack when they do not quite behave like normal radios is actually a relief.
This may reach into the “signal handling” category, but the Belka does also not exhibit any AGC pumping effects when a loud station is on a neighbor channel. For comparison, this is one of the issues that make the D-808 a little more uncomfortable, particularly on SSB – the constant change and modulation of noise and signals, often triggered by strong signals quite far away at the other end of a band or even worse in another band not exactly nice. Even the S-8800 tends to emit soft modulations or sudden faint hisses in response to stations booming in outside of the IF passband. It’s the sum of all those little behavioral bits that make the Belka play in a different league.
Signal handling capabilities:
Despite being so small, the Belka appears to have 3 bandpass filters for preselection of its coverage range, which is one more than for example the SDRPlay RSP SDRs have in the shortwave part of their coverage. However, all you need is 2 hefty signals within a frontend passband to put a radio’s dynamic range to a practical test. I don’t have any test equipment to quantify this robustness precisely, but I happen to have some big guns transmitting (often simultaneously) on several frequencies in the 41 and 31m bands at night over here, producing signals that none of my portables can swallow without hopelessly overloading when those signals (from sizeable dipoles/loops etc.) peak. In most nights at least one of these stations makes the virtual meter needle hit the stop pin (see screenshot above) and then my RSP SDRs start acting up as well.
Being too lazy Lacking the time to put up a proper “big” antenna at the dike, I simply tried a loop-on-ground with pretty substantial 60ft/20m circumference and a MegaLoop preamp deliberately left at its high gain setting, which was coincidentally just the right amount of trouble for the Belka. Here’s a video showing what was piling up on 41 and 31m in the hours before midnight local time (UTC+2) during the test:
I could’ve missed that if I hadn’t explicitly checked the broadcast bands neighborhood for it, but the Belka did show some mild signs of overloading: there were faint intermodulation products on some out-of-band frequencies and there was some very subtle onset of cross-modulation on e.g. Gander Radio 10,051 kHz, manifesting itself in some “rough” modulation:
[0:00: Tecsun cross-modulation, 0:22: Belka (slightly roughened up modulation)]
In the video, you can see that it was worse in the broadcast bands containing the offending signals (9635 kHz is an example and alas I didn’t check if the OTH radar signal on interfering on 9700 kHz was really there or not). This was however nothing compared to the S-8800, which really started acting up despite its improved frontend. This could be mitigated by using the “Local” switch (which I presume only turns off the input RF amp) on the Tecsun and given that the Belka doesn’t have any means of keeping overloads in check it’s a particularly good thing that it wasn’t anywhere near this level of misbehavior. I should also mention that I was scanning particularly the 40 and 20m ham bands the entire evening, and I didn’t notice any signs of overloading there while RRI, CRI, Vo Turkey and company were blasting the broadcast bands at the same time.
While the Belka doesn’t have a switchable preamp or even an attenuator like some multi-banders, it has a fully adjustable “sensitivity” control, a.k.a. “RF gain”. It’s useful even when using the whip only, because turning it down is effectively putting the radio in “manual” gain control mode and listening to a couple of strong stations with the noise turned way down and without the AGC pulling the schmutz back up is so much more relaxing. Unfortunately, RF gain controls never really help with an overloading frontend.
However, the Belka apparently takes a lot of a beating for a portable but maybe it should be duly noted that none of these radios are really meant to (fully) replace tabletop radios and that the little Belka is so good that it can be used in that role shouldn’t be leading to unrealistic expectations. If need be, there are affordable (<$20) attenuators built into male-female BNC adapters available and I think a -10dB type should suffice in most cases, -20dB if you can’t resist alligator-clipping the Eiffel tower to the Belka.
For your eyes only: Signal indicator and a display that speaks to me
The display is very readable from most angles and the bright backlight can be switched permanently on, off or to the usual automatic mode. The signal meter deserves some extra praise:
Similar to the numerical displays on the PL-880/990 or my D-808, it comes with a signal indicator in the unit of “dBµv/EMF”, indicating 0-90 (or 100? 95?) dBµv/EMF with marks every 10 units from 10 to 90. But this is a bar stretching over the entire width of the display and it has a really fine resolution (13 pixels per division, together at least 120 positions!) and that makes it not only quite a joy to watch but also quite useful for a change!
I find it refreshing to see some “analog-ish” meter on a small portable radio, giving me a very fine and immediate indication of the signal and – particularly valuable for me – the noise floor in a satisfyingly high resolution, albeit with the limitation of not showing anything below 0 dBµv/EMF, which is -113dBm or roughly S2. However, also owed to the radio’s high sensitivity with just the whip, I can not only see the atmospheric noise on 20m during daytime on the beach, I can also tell intuitively if it’s bad or not so bad and notice the drop when the band is about to close, because I have already 13 different positions between “no indication” and “10” where other portables have 5 positions for the entire level range or aforementioned numerical displays, which are abstract and slow due to the needed long averaging/integration time to provide readable numbers.
Converting dBµv/EMF into more customary units is way beyond my math skills but thanks to multiple converter pages I can hopefully help:
The thin line above the meter indicates the “sensitivity” (RF gain) setting and it works in reverse from right to left. This looks like a meaningful arrangement in that the signal meter indication doesn’t change with the gain setting (it still indicates the input signal even when sensitivity is turned all the way down!), so the meter may roughly indicate the ballpark for a sensitivity setting that keeps the AGC from riding the signal for most quiet and pleasant listening to some strong stations in SSB.
Despite only having 6 controls and several sub-menus for settings, I think even for less experienced users the operational concept should sink in pretty quickly because it’s quite intuitive or at least not hard to figure out even without the manual. The English manual is short but well-written and a separate download, the radio comes only with a small slip explaining the different power-on modes because it is set to “safe mode” for shipping and doesn’t initially turn on by just hitting the PWR-button.
Basically, the push function of the rotary knob confirms a selection you made with it in one of the menus and gets you back to the frequency display, each of the 4 buttons can be pressed once to reach the first menu level, twice or more to get to the next levels etc. and a new setting becomes effective when you reach the end of the menu chain, if you don’t just push the big knob.
That being said, while the radio is pretty simple to use, having the only rotary knob controlling any variable parameter on the radio comes with a few ergonomical drawbacks and since that knob also dubs as pushbutton, there’s some opportunity to end up on a slightly different frequency than before after adjustments in the menus – the encoder is quite sensitive with many (100?) pulses per revolution and no indents.
There are 32 memories that store frequency, mode and sensitivity (!), but not bandwidth (which is saved per mode) or step width (which is memorized globally for all modes). Selecting, saving and loading memories is as straightforward as it gets but I quite often save a memory by accident instead of loading it, because the “Mem” button that calls up the memory page is also the “Save” button, while the “Vol” button recalls a memory, which is consistent with the operational concept of the radio’s menus but for some reason my internal logic for the memories is wired the other way around. If you pressed the ‘Mem’-button by accident, hitting the ‘Mod’-button gets you out of that menu to return to your currently set frequency.
BTW, the “spy radio” theme of this review wasn’t only inspired by the size and origin of this radio but also the memory slots, which came pre-loaded with band centers etc, and a few pretty odd frequencies (USB), of which some were showing up in logs of number station monitoring sites only. Using memory slots to jump to bands is not the only way to quickly reach another band though: keeping the knob pushed while turning is putting this into a “fast” mode. If you have selected a step width of 1 kHz or more it’s quite easy to jump to a band several MHz away with very few turns of the knob. With 100Hz step width, each encoder pulse is 10 kHz and it’s often only one quick push-and-twist to go from one segment of a band to another.
Doing the first evening walk with it, I immediately appreciated its particular aptitude for that job: It’s not only more sensitive and has better audio (which belongs into the “ergonomics” category because it’s less dreadful to listen to), it also fits in way more pockets than the D-808. Just hold the ‘Vol’-knob for 2 seconds to lock the frequency, then put it knob ahead e.g. into your breast pocket and there may still be room for some other items in it. The radio is so quiet and sensitive that you can even leave the whip partially or even fully collapsed when you’re just listening to strong stations.
Codename Tinnitus: Downsides and quirks
As per usual, this is the place for the reminder that the perfect radio does not exist, no matter how much money you are willing to throw at it, and the cute little squirrel is no exception.
– The radio is showing a considerable number of birdies across the entire coverage range, something between 1 and 4 noticeable ones per MHz, sometimes very faint ones in between. This is usually a huge showstopper for some people, including me. But then again, birdies are a fairly common thing among all the hyper-sensitive portables and entry-level SDRs and of course they are only an issue if they happen to be on a frequency you want to listen to, in a mode that makes the birdie obvious and it all depends on how likely that is in your personal usage pattern. Even more, some disappear if I connect an external antenna, some only exist if I disconnect any antenna (so that turned out to be a wrong way of assessing how many birdies it really has) and only few of the birdies are having a considerable signal, most of them can only be heard quite faintly in SSB and some are spurs apparently coming out of the mixer so their “relative bandwidth” is only a few Hz, they wander off when you tune the radio a few Hz up or down. Being more of a ham band than a broadcast program SWL, the only (for me) really disrupting birdie I found so far is on 14,175 kHz. Weighing in the considerable strengths and qualities of this radio I concluded that I’m willing to live with that where I have to. Believe me, nobody is more surprised about that last sentence than me!
– In a somewhat related matter, the manual states that the display can cause some noise (unfortunately none of the birdies are created by the display), so the display can be turned off by holding the ‘Mod’-key for a while. However I never noticed any noise that would disappear by turning off the display (and I did that a lot) until I tried to operate the radio in the car with the doors closed and the whip not stuck out of the window. Apparently, within that closed Faraday cage the display noise was reflected back onto the antenna and some hash was audible until the display was turned off. Then on my first walk with the Belka I heard it again – it turned out that putting the radio in one of my jacket’s breast pockets with the display pointing towards my body caused that reflection again – I just turned the radio by 180° so the display faced away from me and that solved the problem. Not really an issue, but something to keep in mind.
– Another observation is some slight loss of sensitivity on 17m. I’m not entirely sure that this is common to all Belka DSP but a Russian Youtube video comparing it with an FT-817 (on some wire antenna in the woods) seems to indicate the same – 18 MHz was the only band where the Belka couldn’t fully keep up with the 817 in that video, and in my tests the 17m ham and 16m broadcast bands were the ranges where it was only as sensitive as the other radios, which admittedly is a pretty subtle difference.
– I know that the soldered-in battery will likely be perceived as a downside by anyone who’s not fond of opening the radio and soldering in a replacement in an unknown and very variable number of years. But such a small radio with that kind of battery capacity just wouldn’t be possible with AA or AAA batteries. If you want to maximize the (easily obtainable cellphone type) LiPo battery lifetime, try to avoid charging it to more than 80%, particularly if you want to stow it away. Only charge it fully when you really need the full capacity and also avoid discharging it below 20% without need. The remaining 60% capacity should amount to ~10-14 hours endurance, which is still a lot of SWLing. The Belka can be recharged on any USB port and even the cheapest powerbank from the $1-store will recharge it at least once.
– Another thing I don’t mind personally but that has triggered criticism about other radios was their bright display backlight and the Belka is such a little reading lamp too, which also serves me well as a safety light when I do my walks in the dark so I won’t be run over by a cyclist.
– The volume control doesn’t turn the audio down to zero, only the sensitivity control can reduce the volume further but that’s just an observation, you don’t turn this radio on to hear nothing. 🙂 There is also a little hiss on the output (not half as bad as on the D-808 though) but that can be easily mitigated by simply using some phones with at least 32 ohms upwards. Most cheap earphones fit that bill, but my old-as-dirt Sony earphones have only 16 ohms and made that hiss obvious enough for me to notice. Without FM band on this radio, you’ll not be running into a listening scenario (classical music, jazz ballads or drama on a really strong FM station) where low impedance headphones or hiss could become a problem though.
– Lastly neither a quirk nor a complaint, but a reminder that this radio is specified to work from 3.5 through 30 MHz: Even with the short whip, most things you will receive below 3 MHz are images of stations above 3 MHz. Of course receiving Shannon VOLMET on 3413 kHz USB is not a problem yet but the lower you go, the more odd things start to show up, for example the Shannon and RAF VOLMETs around ~1.8 MHz in LSB (images from 5.5 MHz). Maybe with sufficient external preselection it will “have” 160m but otherwise take it as if it just doesn’t and it was never advertised as such. I did manage to hear my favorite funny British oldtimer ragchewing net on 1933 kHz though.
Now after all the boring stuff, here’s the radio in action – a compilation of some highlights received the evening I tried the Belka with the pre-amplified 60ft loop-on-ground. I could log some pretty interesting (particularly from a European perspective) stations again, despite the poor condx (SFI=69-70, A+Kpi=normal) we had on all the days/nights during the test, even though the ionosphere was slightly more excited that night, just like me when I picked up some rather unexpected callsigns:
BTW, a LOG is a great outdoor DX companion for the Belka: The antenna can be packed small and put down quickly with the least imaginable amount of hassle (dropping stuff on the ground in an educated way), the receiver is just another tiny box and all can still be brought to a place in your coat pockets. Due to its bidirectional pattern and reduced susceptibility to QRN it likely beats any wire you’d have to hurl up a tree, particularly when there’s no tree around.
The spy who…uh…spy radio I love…umm… summary and verdict:
I’m aware that this review may make the radios I compared the Belka with look bad, which they aren’t. So please don’t get that all wrong, I love my Chinese DSP portables, they’re doing a great job, some of them are very versatile and beat the Belka hands down on any other band than shortwave. But they also come with some common quirks and idiosyncrasies particularly on SSB, sometimes showing their low price…or a conflict with their not so low price here and there.
The Belka DSP on the other hand is a completely different animal (in this case, a squirrel) in terms of ingenuity, architecture, dimensions and likely also target audience – yes, it’s a portable and it’s not perfect either but that’s already the end of the similarities: It’s not a multi-band radio, it won’t wake you up in the morning so it’s not a travel radio by common (OK, by Thomas’ definition), it doesn’t even have a speaker and all it does is shortwave… but that’s what it’s really doing like a big one! It behaves and sounds refined like a regular modern ham radio receiver and generally matches that kind of performance. Its big strength is SSB and CW, but the great stability and precision making these modes so good is beneficial for broadcast listeners as well.
It had no trouble to best my D-808 in the “SWL walkman” role by several orders of magnitude in terms of both size and sensitivity and to my surprise it had no trouble beating my S-8800’s great sensitivity on the whip either, while not showing any of the weaknesses of said radios, except for the birdies. Also, its frontend can take bigger antennas. Underestimating what such a little radio could do, the Belka DSP exceeded my expectations in all aspects by far.
That’s why I never cared less about the quirks of a radio, including the birdies, which are the only really noteworthy issue to me. The overall sensation of a well-conceived radio with outstanding performance paired with irresistible cuteness is clearly dominating my feelings about this, and that it comes from what seems to be a little mom-and-pop business in Belarus at a very competitive price compared to the Chinese offers is explicitly not part of my technical assessment, but it sure is another plus for the Belka. It can be bought directly from Alex’ shop here for currently ~$120 plus shipping, I bought it for ~160€ including shipping via the Mobimax.bg shop in Bulgaria, which certainly included a markup for the middleman and the convenience of PayPal payment.
If you have a craving for communication receiver performance particularly on SSB/CW but lack the funds or just the space in your pockets for a communication receiver, if you want to have a stunning shortwave performer with you all the time even when your carrying capacity is limited to whatever kind of pants you’re wearing, if you’re doing mini-DXpeditions to escape the QRM and want to keep it light-weight but performant – this might be a radio you shouldn’t let pass. Its size-vs-performance ratio is mind-boggling and even though spy radios may be a bit out of fashion nowadays, it would still excel in covert radio operations, like when your XYL frowns at you packing more radios than pants for a vacation.
Please don’t forget to eat or burn this document after reading.
I love my Belka radio and it may be one of the best portables I have owned. The small form factor makes it a radio to pocket easily.
I do miss the speaker but in a 3D box I printed out, its all nice and neat.
I made up a wire antenna using a headset curly cord to avoid bending the whip.
Also not bad with the You Loop, the mini BOG and my tin foil ball cap
Add a cellphone mount on a Manfrotto table top tripod or RAM suction cup and you have some mounting options
Spy, Prepper or the radio every SWLer must have to avoid FOMO and Belarus created a brilliant piece of kit
Is this a kit to assemble or is this a FULLY ASSEMBLED radio received and read to operate
You’ve had a little longer time with the Belka DSP now. Is there any updates you would like to add to your great review above? One question I have is all the reviews and pics I’ve see show the included antenna in use. Have you used the Belka with an external antenna setup? Does it overload?
Hope things are good with you.
All good so far, hope you’re staying out of the mess too! The 2 videos at the end of the review show the Belka on my active loop on ground setup, the first one deals with overloading. The LNA is generally lifting the signal of the LOG to regular random wire levels, to put that in some relation. What I might want to add to that is this:
1. The Belka turned out to be much, much more resilient against overloading than any other portable I have. What makes e.g. the Tecsun freak out is caused by my “old friends” RRI and CRI (maybe you remember, they caused trouble with my SDRs and other radios and I sent you screenshots about it back then). This may be a very EU-specific situation though and as long as you don’t have a shortwave big gun in groundwave or first hop distance yelling in your direction, this kind of problem may not even exist in most of the US.
2. Its frontend seems to be as robust as any of my SDRs, including the RSPs and the IC-705, which is consistent with the Belka being an SDR as well. The Blocking Dynamic Range stated for most SDR-based radios on the Sherwood receiver list is around 128dB, which is only an average value (and not directly comparable with analog radios but that doesn’t matter much in this context) but still as good as a lot of older tabletops deemed “good” in this regard, like the NRDs et al. I think the only other portable that could get anywhere near that kind of robustness would be the ICF-2010.
got my radio in very quick time and very pleased so far although i should have compared prices more before i purchased, but the reviews here and on youtube had me too excited and thus i and ended up paying way more than i should have. the ebay listing from mobimax went down $70 in the last 3 days and i have no idea why it was so high when i bought.
while i was waiting i made a list of frequencies for the memory channels and started putting them in when i realized there seemed to be useful frequencies already programmed into most channels. is there any chance of getting a list of the factory memory programming? did anyone save them or still have them? thanks! /guy (73 de kg5gt | wqpz784)
Add my voice to the chorus. Job well done, indeed, 13DKA. I loved the in-depth review and comparative audio and video clips. I will be sharing it post haste with my Facebook and Twitter friends.
I just showed this article/post to my wife and had her listen to most of the audio clips. I have chosen this receiver as my holiday gift. She was impressed, and that’s not easily done.
Cheers and 73s,
Matches my 8 months experience with this excellent receiver.
I take it on bicycle rides in my jacket pocket.
Reception on the whip out in the field, getting away from QRM, is amazing.
Alex just came out with a slightly extended version.
Belka-DX, covering down to 1,5MHz and up to 31MHz.
Ordered it right away 😉
Thanks, Paul! Yes, outsides, in the pocket is where the little squirrel is most impressive and – much more important – really rewarding. Listening to some real DX in a sound that fully matches big rigs while doing a walk is a lot of fun. I find myself doing another lap after an hour of walking because I just don’t want to stop listening to the Belka making the most out of the whip signal and it has massively raised the bar (not only) for small low-cost portables.
I received my radio today and it is way too complicated for me.i will ship this to anyone and wait to get paid when they receive it.if you know anyone interested.thank you.
Happy New Year Earl! Did you ever sell the radio? I’m in Arizona, USA.
So often we see “reviews” that are a sales pitch, or maybe a regurgitation of a spec sheet, and those authors may have never had their hands on the radio. This review is really world class, and sets a new standard for how it should be done.
Really, really well done. Thanks for all the effort in testing, and putting the results into this written form. (And the audio clips add to the excellence.)
Thank you Dave, much appreciated! I’m aiming at writing reviews that I’d like to find myself when I’m interested in a radio, which is pretty much like the wordy reviews I’ve read when I was younger and “embedded multimedia” was still called “flexi disk”. 🙂
Man ,What A Radio!!!!, I’m Definitely Going To Purchase This Shortwave Portable,Very Portable Spy Radio,You Have Visions Of The CIA,KGB,Or Even “007,James Bond”Might HaveUse This Radio In The Field,I Love All The James Bond Movies,Since I Was A Kid,And This Radio Fits The Bill.
Thanks For The Review On This Fine Radio, It’s Just What The Radio Market Needs, Jerry,CB,Call Sign,KHW-6006,CB Handel,”Uncle Sam”,Signing Off!!!
A very nice review, thank you.
And here’s why it was effective. I thought, I don’t need another little HF rig. Then I read your review and thought it looks good but with no 160 or 6 meter coverage, I’ll pass. I did not listen to the sound clips when I read it, my wife was asleep. I went back later and listened to them. Now I need it.
73, Dan KM6CQ
Thank you, Dan! I had pretty much the same line of thoughts when this radio came out and I always try to keep the ever-increasing redundancy on my radio shelf in check. It was some of the videos I watched that made me sit up, what I heard was just the opposite of what I expected. From there, the radioholic in me was at the helm. 🙂
Temping! I would like AM/FM and a SYNC circuit for SSB. Maybe he will come out with a NEWER model?
Thanks to this review I even visited an online shop without HTTPS (in the year 2020) to buy this thing. Don’t worry, the credit card payment form is secure and I didn’t even have to call the fraud department to get the payment approved. The review was just written so well, the itching did not stop until I pressed the buy button. I cannot wait until I hold this little thing in my hands. Thanks 13DKA for this review and Thomas for posting it!
I do wonder now if Alex saw an uptick in purchases. I know of at least two (yours and mine!). :). I had the same itch!
This is an outstanding review, 13DKA. Absolutely brilliant.
And for those readers who accuse me of being a “radio enabler” I want to make it public that because of 13DKA, I just purchased a Belka-DSP from Mobimax! 🙂 Shipping today!
Thank you, Thomas!
Let’s see… IIRC I bought 4 radios based on – or at least kicked off by – reviews or news on this site, including the Belka. That would make you a “radio enabler-enabler” and now you got enabled back by an enabler you enabled. That’s clearly getting out of control!! 🙂 I really hope you like that radio!
Strange, I also ordered one on the 28th. No shipping notice and no response from my inquiry yesterday.
I had a similar problem with my order, no order confirmation (also not in spam) but I emailed Mobimax.bg after 48 hours and they got back to me quiickly with a copy of the order confirmation and tracking number. You didn’t say where and how you ordered it but a couple of things can go wrong:
1.) Did you check your spam folder? Both the confirmation email and the response to your inquiry may hve ended up in the spam folder. Even worse, some email providers just silently discard emails their individual antispam algorithm deems spammy. Some providers rely on spam settings you made on their webinterface and others (e.g. Hotmail) need specific settings on your email client to receive “unsolicited” (IOW anything that’s not in your contacts list) emails.
I know because I work in a business heavily relying on email and it has definitely become harder and more unreliable to get emails to customers since last year.
2.) Your email account may be “over quota” and rejects emails until you freed up some space.
3.) Depending on your payment method and which shop, e.g. your credit card company may have frozen the payment and asked you for a confirmation to process a transaction they deem “unusual”, that email in turn may have ended in spam again.
4.) Maybe your payment method is linked to a different email account than you entered on the shop page. I don’t know which one they use for order confirmation but it may just be the other one. However a reply to your inquiry should’ve been sent to the address you used for that inquiry.
Good news, I heard from Boris. Response to the review must be good as they ran out of stock. It appears they were prepared for this and shipped the radio from a US location in Illinois.
I’ll add that the last HF receiver I purchased was a CommRadio CR-1 when it was first introduced. Prior to that it was a Collins HF-2050 Chuck Rippel recommended in the late 90’s. Needless to say I am really looking forward to the Belka arriving on Wednesday.
BTW, I’m quite curious what *you* think about that radio! Hope everyone get their radios soon.
Received it yesterday and, so far, love it. Early days for sure, but the form factor also has massive appeal. I can fit this in a teeny pack and carry with me pretty much anywhere. This is going to be a great travel radio.
“I can fit this in a teeny pack ”
Hey who did see this coming? 😀 Glad it arrived and maybe you’ll like it bit more every time you try something with it, just like me.
Oh dear! Am I that transparent? 🙂
The Belka showed up today. I was able to spend an hour with it this evening on our deck. My favorite radio for this and just cruising the bands for the last 25 years has been a Lowe HF-150 with Kiwa audio mods. Simple with the best tuning interface. The only radio I have that gets close to the Lowe is an AR7030 Plus which despite it’s performance just isn’t as much fun to use.
The Belka does the HF-150 thing in miniature. It’s an absolute joy to use, sounds good and in my limited observations and seems to pull in everything the 7030 Plus does, even with the 7030’s huge antenna advantage. Surprisingly superb and officially my new deck rig.
Glad you got yours and that it works for you! Indeed, the HF-150 came to my mind a lot when I got the Belka. I only had one as a loaner for a while like… 27 (?) years ago but I remember the impact it had back then and I think the Belka would deserve the same recognition, because it does all (OK, not below 3.5 MHz) that and then some, on its puny whip. I hope you’ll have lots of fun with it! 🙂
Just the thing I need for a handlebar mounted shortwave radio for the bicycle.
Bicycle with SW radio, that sounds like me! 🙂 Mounted in reach of your right thumb so you can tune the radio while riding! 🙂 You’d probably have to be a little creative with the antenna though, on my example of the bundled whip the swivel joint (not the part that can be angled, the other, rotating axis) isn’t very tight so the antenna has a tendency to follow gravity. First thing I would check is if the bike itself isn’t already a good antenna. 🙂
This is a superb review! Thanks for all the effort you put into it, 13DKA!
I’ve been very impressed with how well matched the supplied whip antenna is to the receiver. On walks around the neighborhood I’ve enjoyed holding the Belka horizontal in my hand with the whip antenna adjusted to near-vertical on its right-angle mount. This way the whip is less likely to get bumped or bent while walking. Just add wired earbuds this setup and you’re all set to enjoy SWLing while getting some fresh air too.
Hi Guy! Thank you and yes, that’s what I forgot to point out in the review: After the radios turned out to be (more or less, inconclusive) equally sensitive on the external antenna, the Belka beating the S-8800 with a much shorter whip seems to point a lot to the Belka being matched much better to that whip. That really is an asset when I’m doing walks outside of town and I find myself listening to 20m DX rather than local 80m chatter.
BTW I just checked Amazon and my domestic ham radio suppliers, matching replacement antennas can be bought for ~7€ / $8., or a pack of 2 for 9€. 🙂
Great review! I’m coming up on six months with my Squirrel, and it has made many of my more expensive receivers stay home when we go out in the field on walks or bike rides. For portability it can’t be beaten.
Thanks for making me love this little radio even more than I already do!
Please ask them to add medium wave on the next generation for us DX nuts. They can send me a sample for reviewing and all. ;’) You did a very in depth review and I am convinced this would be an awesome little radio to take to the woods for a weekend camp out. Thanks!!
That was a excellent review and what a great little piece of technology!
I’m nostalgic for the older radio gear but time marches forward and it’s always exciting to see what’s new and coming down the pipeline.
It’s astonishing when you consider the features/performance per $ this little receiver delivers.
Nice review, and good to see some technical content to it! For a supposedly technical hobby, that’s exceedingly rare…
Just a comment: the PL-6xx don’t use the SILabs Si-47xx or similar, and aren’t really “DSP” in a real or current sense (except maybe in the marketing world!). They’re fairly straightforward superhet PLL + AM/FM receiver IC designs, based around a LC72137/TA2057 pair or similar.
Hi Ron, I stand corrected, the PL-660 doesn’t use a SiLabs chip indeed. Short of taking my 660 apart, I found an old review and some PCB pictures indicating that too.
Great review! I concur with it all. The only real criticism I have is the “birdies” as well. I have mine sitting on a table in my bedroom connected to an MLA-30+ loop outside. It’s a stellar performer. The performance of the inexpensive antenna plus the “squirrel” rival and sometimes exceed the “big” radios in the shack.
I Love This Little Spy Radio!!!!,Where Can I Can I Purchase One?,What Radio Dealers,Carry This Bella DSP Portable Shortwave Radio?,I Would Greatly Appriciated Very Much!,This Is CB,Call Sign,”KHW-6006,CB Handel,”Uncle Sam”,Also I Am A ARRL,”Life Member Associate”
Please check the links at the bottom (“summary/verdict” section). BTW I forgot to mention that Alex’ website can be switched to English on top of the page.
Congratulations! Very good review with many useful informatian and literary va?ues. On some Russian site I ha v seen the circuit diqgram. The input is tuned with switchaple inductors and the capacitance of monting and the whip antenna. So using any external antenna detunes this circuit. I am using in this caase a serial variable capacitor to earn resonance. The result very good.
That’s interesting, gotta try this, thank you!
This is one of the best reviews of any radio I have ever seen — thanks so much for it. A question I have is whether Alex has done any modifications/upgrades of firmware or of the receiver itself since it emerged on the market.
That’s my question too. 13DKA do you know?
Thank you for your kind words, Dan and Paul! I passed that question to Alex but I haven’t heard back yet. The older descriptions and presentations I saw on YT (I really watched them all, but most of them were narrated in Russian language) don’t show any obvious differences in the menus etc.
I wrote to Alex too, and here is his reply:
Thanks for your request.
No changes in firmware or of the receiver itself were made since it
emerged on the market.
There will be no user-performed firmware upgrades in future.
What a great review, thank you 13DKA and thank you Thomas for posting it!
LOL. Best review for best portable receiver! Thanks.
Brilliant. To top it all there it is in a dashcam mount! 🙂
I agree: A simply amazing review. 13DKA has really set the bar (and dashcam) awfully high!
I needed one hand free to drink my vodka! 🙂
So this is what keeps you busy. Damn fine review, again. I just might be able to find a bit of room on the tabletop for something the size of the Belka DSP.
Hey Mike, thank you! Hope you’re doing fine! Not sure I’m buying that there’s any room on your tabletop. 🙂 (But – while it will do fine there – that’s not where the little squirrel is meant to live anyway!)
Gotcha, It has all sorts of possibilities for remote listening for sure. I just might have to break down and order one. Hope you’re doing well and staying safe.