Abbree AR-F8: Rolf’s mod to achieve zero volume

Many thanks to SWLing Post contributor, Rolf, who writes:

Hello Thomas,

I have a Abbree AR-F8 portable.

It had a small problem: the volume would not get to zero, so you hear still hear noise if
the volume knob was on low/zero.

I opened the radio and found a solution.

There was a 100R resistor to ground.  Now I have that made to zero R.

After the mod I can now get low/zero volume when I turn the volume knob.
Greetings,

Rolf
Netherlands

Thank you for sharing this modification, Rolf.

As with any mod, readers should note that you might void the manufacturer’s warranty and/or cause other issues with your radio if not completed properly. 

Spread the radio love

3 thoughts on “Abbree AR-F8: Rolf’s mod to achieve zero volume

  1. Max

    Big thank you to Rolf!
    Now 50 other hacks for all the other Bugs and this is going to be a very good Ham Radio. : )

    Reply
  2. Mike T.

    I’ve got a similar issue with the Tecsun PL-310ET digital volume control position 01 is too loud to listen with earphones. It needs a modification so that sound is lower when using earphones. I’m starting to think about purchsing earphones with an inline volume control to address the problem.

    Reply

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.