Tag Archives: SDRplay RSP

SDRplay RSP: I bit the bullet!

SDR-PLay-RSPThere’s a danger in doing radio reviews: sometimes, you get attached to the radio.

This was the case with the SDRplay RSP. SDRplay sent this radio to me on an extended loan and I’m grateful for the many months they’ve let me keep this in my shack and test drive it with various SDR applications.

My RSP review has been published in The Spectrum Monitor and now here on the SWLing Post. There was no need for me to keep it in the shack any longer, but as I reached for the return box, I simply couldn’t let the RSP go.  Instead, I reached for my wallet, contacted SDRplay and paid for it.

I have no buyer’s remorse. The RSP is an amazing little SDR and so very affordable. At $149 US, it costs less than two of the latest portables I’ve purchased. As my review states, it packs maximum performance for its price class.

The RSP will become one of my travel SDRs since it’ll fit so easily in my radio go-bag. This will take a little pressure off of my Elad FDM-S2, which I like using in the shack and on extended vacations.

I can pack the SDRplay RSP with confidence when I’m doing one-bag, international travel, knowing that if it were to get lost or stolen, I’m only out $149. Plus, to a potential thief, the RSP box simply doesn’t look expensive.

When I have a little time, I plan to pair the SDRplay RSP with my Raspberry Pi. Of course, I’ll report on my progress.

Have any readers combined the Raspberry Pi and the RSP? If so, please comment!

Spread the radio love

A review of the SDRplay RSP software defined receiver

The following review originally appeared in the May 2015 issue of The Spectrum Monitor magazine.


SDPlay-RSP

Good things often come in small packages.  But not all of these things are…well, affordable.

Ironically, earlier this year, just after I began to evaluate and review the superb TitanSDR Pro, a robust military-grade SDR, I was approached by the UK-based manufacturer of the SDRplay RSP software-defined radio and asked to review their receiver. I was instantly intrigued––and, truth be told, just a bit amused, considering the difference between these two receivers.  And what, exactly, separates the SDRplay RSP from the TitanSDR? At least $1350.

The SDRplay RSP is one of the recent generation of economical wideband SDRs based upon innovative, inexpensive chipsets; in the RSP’s case, based upon the Mirics MSI3101 SDR chip, and a MSI001 tuner.  Priced at a mere $149 US (plus shipping), the SDRplay RSP is one of the least expensive, yet full-featured SDRs which actually include the HF bands and below, and which require no extra upconverter. Preliminary reviews of the SDRplay RSP were quite positive, so when the folks at SDRplay requested that I review an RSP on loan, I immediately seized the opportunity.

Unboxing and connecting

My review unit of the SDRplay RSP has blue ends caps and an F style connector. All current production units have the new back case and SMA connector.

My review unit of the SDRplay RSP has blue ends caps and an F style connector. All current production units have the new back case and SMA connector.

My SDRplay RSP arrived in a modest well-padded box. And what was inside? Only the SDRplay RSP and a small F-to-BNC adapter. You’ll need to supply a USB cord, as it’s not provided by SDRplay. If you’re like me, though, you already have a number of these around; I prefer USB cables with ferrite chokes (click here for an example).

Note that shortly after I received my review unit, SDRplay made two design changes to the RSP:

1) the F style antenna jack has been replaced with the more common SMA connector, and 2) the chassis color has been changed to black.

SDRplay-RSP-USB

There are only two ports on the RSP: the antenna port, and on the other side of the box, a USB B-Type port (see photo above). Connecting it to your computer and antenna are a cinch.

The RSP’s chassis is made of a strong, lightweight plastic. A very simple design, and one that, I expect, would easily survive the rigors of my favorite brand of one-bag air travel to international DX destinations.

Software Installation

Unlike many of the other SDRs I’ve reviewed in the past (see the Elad FDM-S2 and TitanSDR), the SDRplay RSP does not come with a proprietary (OEM) SDR application. Meaning, the SDRplay company does not make their own SDR application that controls the RSP. Instead, SDRplay provides an API to allow application and demodulator development. There are already plug-ins for third-party SDR applications (like SDR# and HDSDR, for example); once installed, these plug-ins create an excellent compatibility bridge with the RSP.

But note that since the SDRplay RSP relies on third-party applications, the installation process isn’t exactly plug-and-play; you must typically download USB drivers, then the SDR application of your choice, and finally (typically) a dedicated plug-in for the software. Yet it’s not a complicated process by any means; SDRplay’s website has links to all of the necessary downloads (http://www.sdrplay.com/downloads.html) and installation manuals (http://www.sdrplay.com/documentation.html). No intimidation factor here.

Advantages and disadvantages of third-party applications

I should also note that I’ve always been a fan of SDR manufacturers offering open compatibility with third-party applications; in fact, when hardware manufacturers have approached me in the development stages of product design, I always suggest they leave room for third-party development.

HDSDR-SDRplay-RSP-CHU-Canada

HDSDR running the SDRplay RSP (Click to enlarge.)

Why? First, as free SDR apps are so widely used in amateur, scanner, as well as shortwave radio circles, there is already a very large user-base for support when you have compatibility issues. Additionally, third-party applications often work on multiple platforms, like Windows, OSX, Linux and even Android/iOS; OEM application tend to work only on Windows OS. Secondly, if you’re already using, for example, HDSRDR to control a radio, adding the SDRplay RSP is very easy, and as a bonus, you’ll already be familiar with the user interface––there’s hardly any learning-curve involved. Finally, I find I’m much less concerned about product obsolescence when hardware is designed to work in such an open-development environment, thus indicating greater potential for forward-compatibility.

Of course, on the flip side, not having an OEM application means that troubleshooting is often more difficult. If you encounter a problem you’ll have to determine whether the problem lies with OS, computer/tablet, USB driver, SDR application, or hardware––or whether the problem is in a combination of two or more of these, or the communication between them.

Fortunately, I’ve been very pleased with the SDRplay support team; this group has promptly addressed any questions or concerns I’ve had. Moreover, the RSP also has an active forum of users (http://www.sdrplay.com/community/).

Scope of review

In most reviews, I focus the majority of my SDR review upon the pros and cons of the application’s user interface.  In this case, since the SDRplay RSP is using widely-distributed third-party applications, I can focus primarily on the SDR’s performance, instead.

The SDRplay RSP is currently compatible with the following third-party SDR applications:

The ExtIO screen--available in your application of choice via the RSP plugin--allows you to change the RSP's IF Bandwidth/Mode, LNA GR Threshold, Mixer and ADC settings.

The ExtIO screen–available in your application of choice via the RSP plugin–allows you to change the RSP’s IF Bandwidth/Mode, LNA GR Threshold, Mixer and ADC settings.

Indeed, when I asked the SDRplay support team about a comprehensive list of supported SDR apps, they responded:

“We should be compatible with any SDR application that supports the EXTIO library––this is what we are using for SDR# and HDSDR. [We] should also be compatible with any Linux application that uses the gr-osmosdr interface library (such as GQRX and Gnu-Radio).

We have just released it and I’m in the process of writing up the installation instructions. We have also had this running on a Raspberry Pi 2.”

…A Raspberry Pi 2 application? I, for one, can’t wait to try this in the near future––!

For this review, I used two favorite apps with which I’m familiar: SDR# and HDSDR.

SDR-Sharp-SDRplay-RSP-CHU-Canada

SDR# running the SDRplay RSP (Click to enlarge.)

Wideband

I should note here that the SDRplay RSP also has an exceptionally wide frequency range covering from 100 kHz to 2 GHz, with only a narrow gap between 380 MHz and 430 MHz. With the appropriate software, you can use the RSP for a number of applications, for example, scanning, FM DXing, and possibly even radio astronomy.

Performance

So, how about receiver performance?

I’ll going to cut to the chase here: For the $149 price tag? I’m very impressed.

Keep in mind, this is the first SDR I’ve ever reviewed––or even spent more than a few hours exploring––that costs under $400. My only other experience with a low-cost SDR was a few hours spent with the Funcube Dongle Pro+––a popular wideband SDR dongle that also covers the HF spectrum. Frankly, I was disappointed with the Funcube Dongle Pro+, which I found subject to unwanted noises and even some imaging, which I assumed might be indicative of this class of SDR. Fortunately, I’ve not experienced this sort of thing with the SDRplay RSP.

In short: I fully expected $149 performance out of the RSP, but was very surprised to find performance on par with a receiver two or three times this cost.

So for comparison purposes, I chose the Elad FDM-S2 as the benchmark. I currently have three other SDRs in my shack, but the FDM-S2 is the next-lowest in price (currently listed at $539). But to be quite clear: the FDM-S2 is a pretty high benchmark, as I consider it a superb receiver for its price class.

When I first turned on the RSP and tuned through the HF bands, I was quite amazed at the relatively low noise floor of this receiver. Stations seemed to “pop” out of the static. I had assumed that the SDR# application had some sort of DSP noise reduction engaged, but this proved not to be the case––I confirmed the same low noise floor level via the HDSDR application.

SDRplay actually gave the RSP to me on an extended loan, so I’ve had the opportunity to use it both in quiet winter conditions and more unsettled, noisier conditions indicative of spring and summer here in the US. I used the RSP almost exclusively for two weeks in an effort to uncover its most notable strengths and weaknesses. But by the end of the two-week period, I began to suspect that the RSP might actually have sensitivity on par with my other SDRs.  To answer this question, I turned to A/B comparisons with the FDM-S2.

Sample audio

I believe the following is a good representative comparison between the SDRplay RSP and the Elad-FDM S2.

The following recordings are of Radio Riyadh on 15,225 kHz.  Riyadh’s signal is quite weak and voice levels are barely above the noise floor. Both the Elad FDM-S2 and SDRplay RSP (via HDSDR) were set to a slow AGC, AM sync, and a 8.2 kHz bandwidth.

First, the Elad FDM-S2:

Now the SDRplay RSP:

In this representative sample––and pretty consistently throughout all my comparisons––the FDM-S2 was able to pull voice and music out of the noise better than the RSP. In weak signal DXing, this is important, especially when you’re listening for a station ID.

So would I ever replace my FDM-S2 with the RSP? No.

Still, for a $149 receiver? This performance is most impressive! The RSP is only a little less sensitive than my much pricier SDRs.

Summary

SDRPlay-RSP (1)

Invariably, all radios have strengths and weaknesses; here is a list of my notes from the moment I put the RSP on the air:

Pros:

  • Excellent performance for price
  • Good sensitivity and selectivity
  • Low noise floor
  • Compatible with multiple open source SDR applications
  • Very wide frequency range (frequencies above 30 MHz not tested in this review)
  • Works with multiple operating systems
  • Selectable USB/LSB sync detection via supported third-party applications
  • 8 built-in switched preselectors that cover various portions of the RSP’s entire bandwidth
  • Compatible with a number of excellent third-party SDR applications (see con)
  • One of the few low-priced SDRs that doesn’t require a converter for HF coverage
  • Exceptional value

Cons:

  • No OEM SDR app (see pro) SDRuno is now SDRplay’s OEM/native application for the RSP line
  • Some moderate overloading on very strong stations (though a little tweaking of SDR applications settings can largely remedy this)
  • Via the current offerings from third-party apps, no multi-channel audio recordings SDR Console allows for multi-channel recordings with the RSP

Conclusion:

SDRplay Above PictureI walked into this product review expecting to be…well, disappointed. As I have some benchmark SDRs on my desk at all times, I hadn’t investigated inexpensive SDRs because I felt they would simply be redundant.

Fortunately, the SDRplay RSP really impressed me from the beginning with its low noise floor, variable IF bandwidth options, and relative ease of installation. Since the RSP only requires one USB cable for both data and power, it’s also an ideal portable SDR.

Up to this point, I’ve always hesitated suggesting that those interested in a beginner’s SDR invest in any sub-$200 SDR, unless they simply want to get their feet wet and aren’t interested in performance. But at $149 US––the price of a good shortwave portable radio––I can confidently recommend at least the SDRplay RSP to those readers who want to start out with a good-quality rig. Indeed, for many, it might out-perform other receivers in their shack.

I see the RSP having a place in my shack as well, especially on my portable shortwave listening adventures. If you’re looking for a quality first SDR, or, like me, are interested in a supplemental or remote receiver that won’t break the bank, the RSP is just the ticket. And at just $149, you simply can’t lose.

Meanwhile, what’s next for me? I plan try the RSP via the Raspberry PI 2 and my newly acquired Dell Venue 8 tablet.

The SDRplay RSP can be purchased directly from SDRplay via their online store: http://www.sdrplay.com/purchase.php

Resources:

Spread the radio love

Raspberry Pi 2 API for the SDRplay RSP

DSCF5072

Many thanks to Jon Hudson at SDRplay who notified me that they have released a Raspberry Pi 2 API for the SDRplay RSP receiver. Note that the API is a “pre-release” version and you’ll need to reference the included Linux installation notes.

If you have the RSP and a Rasberry Pi 2, you might consider trying the new software. The SDRplay development team are eager to hear feedback.

Click here to download.

Spread the radio love

Wyn compares the SDRplay RSP and Airspy

SDR-PLay-RSP

After posting about the price reduction in the SDRplay RSP, Wyn Evans commented with his comparison of the SDRplay RSP and Airspy (another popular low-cost wideband SDR). Wyn writes:

I have both and Airspy and the SDRplay RSP. I like them both, but on balance I prefer the RSP. The pluses of the RSP over the Airspy for me are:

1. Sensitivity – At least with my Airspy, I find the sensitivity a bit disappointing. The RSP is on the other hand excellent. I read on another forum one user claiming that the difference between the two was as much as 3 dB. I can’t verify the number, but I would not be surprised if it were about right

2. HF support – Absolutely fantastic, no up-converter needed

3. ZIF or Low IF. In ZIF mode, with calibration, you can get image free reception

4. Programmable filters. You can change the selectivity from as low as 200 KHz to the full bandwidth of 8 MHz, This is a huge plus for DX-ing if you live in an area with very strong local stations

The plus for the Airspy is that there is does cover the gap between 380 MHz and 430 MHz, with the RSP doesn’t. For some people, this is a really big deal.

Both seem to have about the same dynamic range, which isn’t surprising as despite using different tuners, the ADCs seem to be virtually identical.

So in summary, I think both are pretty good products with pluses and minuses, but at this new price point, as long as you don’t need to use 380 – 430 MHz, there is really only one I would choose now.

Many thanks for your comparison, Wyn. As I stated before, my impression of the SDRplay RSP is quite good so far. I live in a very RF quiet area–I am curious if anyone has used the SDRplay in urban areas, near local broadcast stations and experienced any overloading or serious imaging.

Spread the radio love

SDRplay RSP: now $149 or £99

SDR-PLay-RSP

I just received the following tweet from @SDRplay:

We’ve been able to reduce the SDRplay RSP price to $149 or £99 (approx €149 ) + tax/shipping. See

I’ve just started reviewing the SDRplay RSP for the June 2015 issue of The Spectrum Monitor Magazine. Preliminary impressions of this SDR are quite positive–especially for a receiver in this price class. At $149 US, the SDRplay RSP is now less expensive that the Funcube Dongle Pro+. Indeed, the RSP is even less expensive than portables like the Tecsun PL-880 and Sangean ATS-909X.

Over the next two months (as I get to know the RSP better) I will post the occasional broadcast recording using the SDRplay RSP with HDSDR and SDR#.

Spread the radio love