A review of the SDRplay RSPdx wideband SDR receiver

SDRplay recently announced the latest product in their line of affordable 14 bit wideband SDRs: the SDRplay RSPdx.

For over two weeks now, I’ve had an early production model of the RSPdx here in the shack operating on a beta version of the SDRuno application.

In the spirit of full disclosure, SDRplay is a long-time supporter of the SWLing Post and I have alpha- and beta-tested a number of their products in the past. This early production RSPdx was sent to me at no cost for a frank evaluation, and that’s exactly what I’ll offer here. To be clear, while I am using beta software, this is not a beta SDR, but one from a first limited production run.

And thus far, I must say, I’m impressed with the RSPdx. 


The RSPdx has been introduced as a replacement for the RSP2 and the RSP2pro receivers. It has been updated and upgraded, with a completely new front-end design.

Here are the highlighted improvements and changes:

  • Performance below 30 MHz has been enhanced when compared to the RSP2/RSP2pro.
  • Performance below 2 MHz has been substantially upgraded. Through the use of the new HDR mode, both dynamic range and selectivity have been considerably improved.
  • There is now a BNC antenna connector on antenna C position instead of a HiZ port. Both A and B antenna ports are SMA like other RSP models.

Let’s face it:  those of us interested in low-cost SDRs are spoiled for choice these days. The market is chock-full of sub-$200 SDRs, especially if you include all of the various RTL-SDR-based SDRs and knock-off brands/models one can find on eBay.

Personally, I invest in companies that support radio enthusiasts for the long haul…those that do their own designs, innovations, and production. SDRplay is one of those companies.

SDRplay’s market niche has been providing customers with affordable, high-performance wideband receivers that cover an impressive 1 kHz to 2 GHz.

Wideband coverage can come at a cost. Unless you pay big money for a commercial-grade wideband receiver, you’re going to find there’s a performance compromise somewhere across the spectrum.  On the RSP2 series, those compromises would have been most apparent on frequencies below 30 MHz.

That’s not to say HF, MW, and LW performance was poor on the RSP2 series–indeed, it was quite impressive and well-balanced; it just didn’t stack up to the likes of the similarly-priced AirSpy HF+ and HF+ Discovery, in my humble opinion. Both little Airspy SDRs have wooed DXers with their impressive dynamic range and overall ability to work weak signals in the HF portion of the spectrum.

Neither of the AirSpy HF+ models are wideband receivers, but still offer a generous range:  9 kHz to 31 MHz and from 60 to 260 MHz––about 11.5% of the frequency coverage of RSP models. (Note that the Airspy R2 and Mini do cover 24 – 1700 MHz.) For shortwave radio listeners that also want to venture into the UHF and SHF regions, a wideband SDR is still required.

It’s obvious SDRplay’s goal is to make the wideband RSPdx into a choice receiver for HF and, especially, for MW/LW DXers. But have they succeeded? Let’s dive in…


As I say in most of my SDR reviews: doing comparisons with receivers that have so many features and adjustments is never easy. In other words, we want an apples-to-apples comparison, but it can be difficult to achieve, especially with new products.

I compared the SDRplay RSPdx with the WinRadio Excalibur and Airspy HF+ Discovery. Here’s how I set up my comparisons:

The RSPdx, Excalibur, and HF+ Discovery all used the same antenna in my tests––a large, horizontal delta loop antenna, via my ELAD ASA15 amplified antenna splitter. I’ve used this antenna splitter for years and can vouch for its equitable, lab-grade distribution of signal.

The RSPdx is not in full production at time of posting, thus application options are limited. Typically, I’d load comparison SDRs in SDR Console or HDSDR and test them with identical settings as well. At present, the RSPdx is only compatible with a beta version of SDRplay’s own application, SDRuno (which will come out of beta rior to the first major production run). The benefit of using SDRuno is that you unlock the full potential of the RSPdx, plus signal and noise numbers are incredibly accurate.

For each SDR in this comparison, I used their native/OEM application to give them the best possible performance.

I also matched filter settings and made an effort to match AGC and volume settings as closely as I could.

Additionally, I resisted the temptation of comparing my RSP2 with the new RSPdx because I didn’t want to run two simultaneous instances of SDRuno on the same computer––especially considering one was in beta.

Is this comparison perfect?  Probably not, but I did the best with the time I had available. I do intend to make further comparisons in the future.

Longwave performance

Via the RSPdx’s new “HDR” mode, both dynamic range and selectivity have been considerably improved with frequencies below 2 MHz. While I’ll fully admit that I’m not much of a longwave DXer, my very first listening session with the RSPdx started in this region of the spectrum.

In fact, the first evening I put the RSPdx on the air and confirmed that I was, indeed, in HDR mode, I noticed a small carrier via the spectrum display on 171 kHz. I clicked on it and quickly discovered it was Medi 1. The signal was faint, but I could clearly ID at least one song. This truly impressed me because I believe this was the first time I had logged Medi 1 on longwave from the shack.

I didn’t connect the Excalibur at that point to see if it could also receive the faint Medi 1 signal, but I imagine it could have. I’m pretty sure this would have been outside the reach of the RSP2, however.

I tried to explore more of the longwave band, but due to local RFI (I suspect an appliance in my home), most of the LW band was inundated with noise. With that said, I did grab three of my benchmark non-directional beacons.

Obviously, the RSPdx is a capable LW receiver.  I would like to spend more time on this band once I’ve tracked down the source of my local RFI.

Mediumwave/AM performance

In the past two weeks, I’ve spent many hours with the RSPdx on mediumwave.

We’re heading into the winter months in the northern hemisphere, and that’s normally when my listening habits head south on the bands.

In short: I find the RSPdx to be quite sensitive and selective on the mediumwave bands while the HDR mode is engaged. A major improvement over its predecessor.

I primarily compared the RSPdx with my WinRadio Excalibur on mediumwave since I consider the Excalibur to be a benchmark MW receiver. And, as you’ll hear in the screencasts below, the RSPdx truly gives the Excalibur a run for its money:

740 AM – RSPdx vs. Excalibur:

860 AM – RSPdx vs. Excalibur:

Note that my horizontal delta loop antenna is omni-directional, hence the tug-of-war you hear between stations in the clips above.

In truth, I could have done more to stabilize the signal on both of these fine SDRs, but I wanted to keep the comparison as fair as possible.

You might have noticed that both were running AM sync mode. It seems the sync lock on the RSPdx may have also improved––though I would need to do a direct comparison with the RSP2 to know for sure––but in terms of stability, I still found that the WinRadio Excalibur was superior. Mind you, the Excalibur is a $900 – $1,000 receiver and has the strongest synchronous detector of any radio I’ve ever owned.


SDRplay notes on the preliminary specifications sheet that the RSPdx has been “enhanced” when compared with the RSP2 series.

And, after having spent two weeks with the RSPdx on the shortwave bands, I would say this is a bit of an understatement. For although I haven’t compared the RSPdx directly with the RSP2 yet, I do feel HF performance is substantially better than its predecessor. Indeed, in my comparisons, I often found it gave the Excalibur some serious competition. Overall, the Excalibur had an edge on the RSPdx, but the gap has closed substantially. That’s saying something.

For the comparison videos below, I also included the excellent AirSpy HF+ Discovery.

40M LSB – RSPdx vs. HF+ Discovery:

80M USB – RSPdx vs. Excalibur:

31M Broadcast – RSPdx vs. HF+ Discovery:

As you can see and hear, the RSPdx is now in the league of some of the finest HF receivers in my arsenal.

But I’m curious to know what you think after listening to these comparisons. Please comment!

Notch Filters

For those of you living in areas with DAB/DAB+ broadcasters nearby, you’ll be happy to note that the RSPdx has a DAB filter to help mitigate any potential overloading.

Also, if you live near a blowtorch mediumwave station, you’ll be quite pleased with the MW notch filter. It’s so effective at filtering out the mediumwave band, my local blowtorch on 1010 kHz is barely visible on the spectrum once the notch filter is engaged. (Note: I should add that neither the DAB nor the mediumwave notch filter was engaged during any of my previous comparisons above.) Check out the screen shots below showing the mediumwave band before and after the MW notch filter is engaged:




For those of you looking for a budget wideband SDR with solid performance below 30MHz, look no further.

For $199 US, you’re getting a quality UK-designed and manufactured SDR in a proper metal housing.  The OEM application, SDRuno, is one of my favorite SDR applications and can fully take advantage of the RSPdx’s new HDR mode. No doubt, with a little more time, most third-party SDR applications will also support the RSPdx.

Frankly, I was expecting classy mediumwave and longwave performance as this was the most touted upgrade of the RSPdx. SDRplay certainly delivered.

In my experience, SDRplay doesn’t oversell their products. Their preliminary product sheet mentioned improved performance on HF, but their press release didn’t even mention the HF upgrades. And this is where I, in particular, noticed significant improvement. Perhaps this is because I am primarily an SWLer, thus spend a larger portion of my time in the HF region.

SDRplay products also have a mature, robust SDR application via SDRuno. Day to day, I tend to use Simon Brown’s SDR Console as my primary SDR application, since it’s compatible with so many of my SDRs and also offers some of the best recording functionality for those of us who do audio and spectrum archiving. Each time I beta test or review an SDRplay SDR, however, I’m more and more impressed with SDRuno. It’s evolved from being a rather cluttered application to one with a thoughtful, cohesive user interface that’s a joy to use––a product of true iterative agility.

Indeed, after having used SDRuno exclusively these past two weeks, I believe I would consider it as my primary SDR application…if only it had audio recording in addition to spectrum recording, and could run multiple instances with multiple SDRs. Again, given a little time, I wouldn’t be surprised if some of this functionality is eventually integrated.


Since many SWLing Post readers already own an SDR, I’m sure some of you will have questions. Let’s address a few of those right now.

Question: “I have an RSP2/RSP2pro. Should I upgrade to the RSPdx?”

My recommendation: If you are a shortwave, mediumwave, or longwave DXer, I would indeed recommend upgrading to the RSPdx. If you primarily use your RSP2 series SDR on frequencies above 30 MHz and only occasionally venture below for casual listening, then I’d keep the RSP2.

Question: “I have an RSP1a. Should I upgrade to the RSPdx?”

My recommendation: If you’ve been enjoying your RSP1a and would like to take your listening/monitoring to the next level, then, yes, I would upgrade. Not only can you take advantage of the RSPdx’s enhanced performance, but the RSPdx affords you three antenna ports, and has a more robust front end.

Question: “I have an RSPduo. Should I buy the RSPdx?”

My recommendation: I’m a big fan of the RSPduo. Unless you’re a dedicated mediumwave/longwave DXer, or you’d just like to add another separate SDR to your radio arsenal, I wouldn’t rush out to buy the RSPdx.

And while I’m offering advice, I’d like to offer my standard two cents on the subject of performance optimization: a radio is only as good as its antenna! If you have a compromised antenna, invest in your antenna before upgrading your radio. You’ll be glad you did.


Happily, I can  recommend the SDRplay RSPdx without hesitation. This latest iteration of the RSP series SDR is a proper step forward in terms of performance and functionality––obviously implementing years of customer feedback.

SDRplay also has a proven track record of innovation and customer support. Their documentation, video tutorials, and community are among the best in the industry. Purchase with confidence.

Click here to check out the RSPdx at SDRplay.

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

25 thoughts on “A review of the SDRplay RSPdx wideband SDR receiver

  1. Jose Pedro

    IN MY opinion, it is best to compare the two or three receivers at the same time using the same antenna, all of them capturing a WWV-type signal station and with the computer running only with battery (the switched power supply introduces a lot of noise). I have an SDRplay but for me the best is the Funcube Pro +

  2. Bertel

    Very interesting reading.
    This little box sounds very impressive.
    But one question:
    I’m currently using an ICOM-R2500, mainly for SWLing on LW-MW-HF.
    But also higher on VHF-UHF.
    Can I expect to gain something by getting a RSPdx instead?

      1. Bertel

        Thanks for this information.
        But do You mean, that actually hardware-wise, I will not benefit from entering the SDR realm?
        Do I have good enough hardware as it is?

        1. Thomas Post author

          If your goal is to cruise the bands and do traditional listening/monitoring, and you really don’t care about the features of SDRs (spectrum displays, variable bandwidths, recording features, etc.) you might want to simply stick with the R2500. I understand it’s a fantastic receiver. I’ve never directly compared the RSPdx with the R2500 (nor any other SDR) so can’t speak to any performance differences. Of course, you may want to keep the R2500 and invest in your antenna. That’s typically the best way to improve your listening post.

          With that said, if you’re curious about SDRs, the RSPdx is a great one.


  3. Joao Fonseca

    Many thanks for sharing this valuable information.
    I have the Airspy Discovery. Since I mostly listen to HF, do you recommend me to get the RSPDX or the Excalibur in order to get the most of SWL?

    Thank you

    1. Thomas Post author

      Honestly? If you already have the HF+ Discovery, and you’re primarily an HF guy, I’m not sure I’d go for the RSPdx or Excalibur unless you either wanted wideband coverage and a wider working bandwidth (RSPdx) or a wider working bandwidth with more filtering (Excalibur). I would encourage you to take the money you would have spent on another SDR, and put that into antenna upgrades. 🙂

  4. Bill Hemphill

    I did a road trip yesterday down to the Ham Radio Outlet store in New Castle, DE. I picked up the new RSPdx. I currently have the RSP2.

    On my RSP2, whenever I plug in the AC Adapter on my laptop, the noise from the switching power supply just overwhelms reception of any signals. So I have to use the Laptop on battery power only. I was really curious if the RSPdx would be bothered in the same way. Plus I am a big fan of AM broadcast band.

    I’ve only played with the RSPdx for a few hours, but can already state the following (when compared to the RSP2):
    1. The AM Broadcast band reception is greatly improved. HDR mode works well. I used the DX wth one of my loop antennas and it performed very well.
    2. The DX is NOT bothered by the switching power supply of the laptop. Tested it with both a laptop that was charging and a windows tablet that was charging. Very little or no added noise.

    I haven’t played with it on the SW bands yet.

    I am very pleased with the upgrade.

    Bill Hemphill
    Smithville, NJ

  5. Peter Wilson

    Hello Thomas,
    I have ordered an Airspy HF+ Discovery, and am also considering upgrading my SDRplay RSP1 to an SDRplay RSPdx. I look forward to your comparison.
    I am interested in FM and MW and will go to Africa next month for a DXpedition in an RF quiet location.

  6. Darrell Hagan

    Quote: “…..Question: “I have an RSP1a. Should I upgrade to the RSPdx?”

    My recommendation: If you’ve been enjoying your RSP1a and would like to take your listening/monitoring to the next level, then, yes, I would upgrade. Not only can you take advantage of the RSPdx’s enhanced performance, but the RSPdx affords you three antenna ports, and has a more robust front end……”

    Is the RSPdx really such an upgrade over the RSP1A? First, I bought the RSP1. Worked well. Upgraded to the RSP1A when it became available. Did real time comparison between the two by feeding both receivers from the same antenna via a Mini-Circuits splitter and using (2) instances of HDSDR, 1 per receiver of course. Same gain settings on both. In my tests, the original RSP1 was VERY close to the RSP1A on all tested signals. But, the RSP1A did fare better on MW and on VHF & UHF due to the MW & DAB notch filters.

    The RSPdx looks to be a nice replacement for the RSP2/PRO but if it is also encouraged to upgrade from the RSP1A then we get into this: RSP1—-> RSP1A—-> RSPdx—->?. No real worries as they are all fine and affordable pieces of equipment but am just wondering if we really need to keep upgrading unless there are real major changes?

    1. Thomas Post author

      Honestly, Darrel, it’s a mostly subjective question, but one I try to answer to the best of my ability. Each updated and upgraded receiver does spec out better than the one it replaces. For many enthusiasts, though, may never notice or even appreciate those changes–especially if they have a severely compromised antenna. For DXers and people who focus on weak-signal work, the upgrades are meaningful. I’m in that latter group, and I would upgrade just to get any incremental advantage.

      Truth is, _any_ of the RSP receivers could easily be the only SDR one would ever need. The RSP1 was a game-changer–a market disruptor–in my opinion. Still a brilliant little unit!

      I try to answer the question assuming someone is a radio enthusiast who regularly upgrades because they simply love having the latest and greatest. I assume someone reading a review on my blog is likely interested in at least considering upgrading equipment if the upgrades benefit their listening habits.

      It’s a tough call, though, because I bet an RSP1 connected to a serious high-gain antenna will outperform an RSPdx connected to a mediocre antenna. In fact, I’d guarantee that.

      So as I started out saying, it’s quite a subjective set of questions and answers, but ones I’m asked be readers all the time so I try to post my best responses. 🙂

      Thanks for your comment!

      1. Guy Atkins

        I’ll add one additional point to Thomas’ excellent response. It appears that SDRplay has gone all out to make the RSPdx the most overload-resistant RSP receiver yet. If you are bothered by any strong local stations bleeding into bands where they shouldn’t be (or causing increased noise floor levels) on your RSP1, the the upgrade will be worth it.

      2. Darrell Hagan

        Thank you Thomas & Guy, and to Thomas for the excellent and professional review :). Great answers to my concern. And I do like that the folks at SDRPlay are continually improving their products :).

  7. Guy Atkins

    Thomas, thanks for an extensive and detailed overview of RSPdx. I appreciate the time it took you to produce this for your readers. Thank you!

    I own Studio 1, the predecessor of SDRuno, and regularly use multiple (hardware) receivers for comparisons. SDRuno is limited to operating multiple SDRplay devices only, so sharing SDRuno between the RSPdx and Excaliber (or other non-RSP devices) is not possible, sadly. We’ll need to wait until SDRplay offers an extio DLL file for RSPdx use in HDSDR, and Simon Brown builds RSPdx into his excellent SDR-Console program. At that point we can more accurately do A-B tests with the new RSPdx. (However, I suspect we’ll have to do without the “HDR Mode” that SDRuno V1.33 provides).

    I will do a little dance of joy when a proper recording scheduler is built into SDRuno. As a DXer of foreign medium wave signals, a scheduler is highly useful. SDR-Console and HDSDR have very good schedulers, and in my opinion SDRplay should aim for the same functionality. Until then, my work-around is to record via HDSDR’s scheduler and play back the files in Studio 1. My DXer pal Brett Saylor has verified that SDRuno versions 1.24 and 1.32 can play back HDSDR WAV files…so SDRuno can use the same recording scheduler workaround.

  8. Fernando Duarte

    Hi Thomas,

    Thank you for the fine review. I have only a notice to the comparison between RSPdx vs. HF+ Discovery:
    On the GUI SDR# you do not have activate the “Lock Carrier” in DSB mode. The signal is not stable.


    1. Tudor Vedeanu

      That “Lock carrier” option never had any discernable effect here on my Airspy SDRs. At least not as a substitute for a proper AM sync function. I always go back to SDR Console when I need AM sync or ECSS.

  9. Tom Servo

    I dunno, it seemed like a noticeable drop-off in reception ability between the new RSPdx and the other two receivers. Understandable with the Excalibur, but the AirSpy just seemed to trounce it even in these side-by-side comparisons.

    That said, I’m a longtime OG RSP-1 user and I’d still take the new RSPdx simply for SDRUno, which is just such a great application (minus the awful recording abilities & scheduler, anyway).

    1. SA

      Unfortunately no comparisons were made between the RSPdx and the Airspy in areas where the RSPdx has seen the greatest changes, i.e. the afore mentioned HDR mode. To be fair, Thomas acknowledges that his interest is primarily Short Wave, but SDRplay stress that the big improvements lie below 2 MHz and here there are no comparisons with Airspy at all. The other point to bear in mind is that these comparisons are performed with different software and different settings (a point Thomas also makes) and in my own experience having NR on in SDRuno makes a huge difference to the quality of these marginal signals

      1. Thomas Post author

        Soon, I’ll do some comparisons between the AirSpy HF+ Discovery and the RSPdx on MW. I’ve always considered the Excalibur to the best best MW receiver I own, hence the comparison, but I’ll run some AirSpy comps too!


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.