Chuck’s re-capped GE Superadio II might set a new AM BCL benchmark

I recently took delivery of a better-than-new classic solid-state portable broadcast receiver: the venerable GE Superadio II.

This Superadio II was generously given to me by SWLing Post contributor, Chuck Rippel (K8HU), who has–in his spare time–been re-capping and restoring all three of the GE Superadio series models and bringing them back to life. Chuck wanted to send me one of the units he’d recently finished, knowing that it might help me when doing AM reception evaluations. He insisted “no strings attached.”

Besides thank you, all I can say is…

Wow–!

Note angels singing in the background.

When I received the Superadio II a week or so ago, I removed it from the box and it looked brand new; even sporting the original “Headset Capable” grill sticker.

This is a case, however, of a refurbished radio likely out-performing the original.  Here’s a list of the main modifications:

  • All of the original dry capacitors replaced with Nichicon Audio Grade components
  • FM AFC and AM and FM IF and RF sections have been aligned
  • Rebuilt the volume control

I’m sure there are other modifications Chuck didn’t mention.

Chuck told me each radio takes a full day to restore. Some of the alignment, rebuilding, and re-capping is surprisingly tricky and varies with each of the three models. Why is he doing this?

Chuck told me, “My enjoyment comes from giving these radios a new lease on life.”

A new lease on life, indeed!

Last weekend, we had a break in the weather–and I had a short break in my schedule–so I took the GE Superadio II, GE 7-2990A, C.Crane CCRadio3, and Panasonic RF-2200 outdoors for some fresh air.

It was late afternoon and, frankly, I didn’t have the time to do a full comparative session, but having spent the better part of an hour tuning around and comparing the characteristics of each radio, I decided to make a short video to share.

The video features the GE Superadio II, but I speak to some of the pros and cons of each model. Keep in mind, this is very much a casual/informal comparison:

Click here to view on YouTube.

The SR-II not only has the best audio fidelity in this bunch, but it’s also extremely stable and has no noise floor to speak of. No doubt, this is the result of those Nichicon Audio Grade components and a skilled technician.

Side note: Chuck is well-known in the radio world because he used to restore the Collins R390A which must be one of the most mechanically-complicated receivers ever made.

I haven’t even properly tested the SR-II on FM yet because I couldn’t pull myself away from the mediumwave dial that afternoon!

I asked Chuck if he would consider refurbishing GE Superadios for other people and I think he would.  If interested, contact me and I’ll put you in touch. Else, Chuck might leave details in the comments section of this post.

He does currently have a restored GE Superadio II on eBay. I just checked and in his listing, you’ll see a full description of the modifications made.

Click here to view on eBay.

Chuck, thank you once again for sending me this SR-II. It’ll become a permanent addition here at SWLing Post HQ. Again, I’m simply amazed at the audio fidelity of this 1980s era receiver. Honestly, I don’t think there’s anything made today that can even compare.

And thanks for doing your bit to refurbish these classic portables!

Spread the radio love

50 thoughts on “Chuck’s re-capped GE Superadio II might set a new AM BCL benchmark

  1. Kirk J. Poole

    Hello everyone!

    I’m Kirk Poole and I am from Portland, Oregon. I’ve gone through a lot of boat-anchors in my short (ha!) life. All I am left with now is my cosmetically nice Superadio II! The audio and sensitivity no longer seems like it did when new. I’ve had it about 25? years. I am certainly interested with what Chuck could do to bring out the best in my last Dx’ing radio! It doesn’t seem to pick up stations like in the past.

    I’m old and crotchety now. I have grandchildren in the house and my wife gives me a tiny allowance out of MY own disability check (bless her little heart). I don’t know of the costs involved buty would sure love to know how much the fine artwork would cost and then ship it to Chuck and have my baby better than new!!

    I’ve DX’ed since I first heard a Calgary station signing off at 11 pm Pacific (midnight Calgary) playing the strains of Oh, Canada! I’ll never forget the excitement of my new GE clock radio reaching some 800-900 miles away from Alberta. That germinated a life long hobby that I still like to do, especially when I go to Eastern Oregon.

    Reply
  2. Jamie Patterson

    Chuck recently refurbished my SR3 and it turned out great! The sensitivity and selectivity are very improved Make sure you use packing peanuts or styrofoam when you ship it. I used those puff packing pillows and the box was crushed by the shipper.

    Reply
      1. Michael

        Wow. I’m typically hesitant of comparing speaker-audio in recordings, but in this case the difference was quite distinct (and YouTube didn’t seem to mangle the difference, either). Was thinking you might have been using something more exotic there :-). Keep using that phone for videos, hihi.

        Reply
  3. cnash

    I CANNOT BELIEVE WHAT I AM READING THATS WHY I’M FREAKING OUT AND SCREAMING WITH ALL CAPS !!!

    Chuck is like a precious gem and if I had the ability I would find a way to ensnare him and keep him in captivity because these people are exceptionally rare and a real trophy. Not to hang on a wall, what I mean is to just baby him and provide everything that he needs for a long long life .

    He’s invaluable , an extremely rare find because he’s so knowledgeable & gracious and willing to help virtually anybody .

    Mr Rippel thank you for all you do because as you know the GE Superradio’s are no ordinary radio these radio’s are cherished and to have someone so kind with the ability & knowledge to bring them back to life is just mind boggling to me . I never even thought it was a possibility .

    Reply
  4. Chuck Rippel

    If anyone is looking for a near mint SR-II, there is one one E-Bay now. I have known the owner well for many years and he has even written a few reviews here on the SWL’ing Post. The URL fir the radio is:

    https://www.ebay.com/itm/EXCELLENT-Superadio-II-2-General-Electric-GE-AM-FM-Super-Radio-7-2885F/143971892807?hash=item218564be47:g:gTEAAOSwmFFgQ-n7

    I have an SR-II that is new, unopened in the original box. Of course, it has not been restored as I would have to open the original packing to do that. Doesn’t mean I won’t, but I’d like to sell it restored or not, buyers choice. Drop me a note in interested to:
    [email protected]

    Chuck Rippel

    Reply
  5. Bob Cummings

    I received my SRII from Chuck about a week ago. I was completely blown away with the sensitivity and sound. I don’t know what else to say other than Chuck is a true gentleman and craftsman. I am a very happy listener. Thanks a million for the article and the introduction to a true talent!

    Reply
  6. Chuck Rippel

    Hey folks, I just got an SR-II from a fellow named Tommy Phelps in Nashville, TN. Nicve radio but no note in it. I remember someone was going to buy one and have it dropped shipped to me identifying who the radio no belonged to. All I got was the radio by USPS and nothing else.

    Any ideas out there who it might belong to?

    Chuck

    Reply
  7. Chuck Rippel

    Good idea. Maybe take it to the coast and see if you can hear Hawii or some of the goodies Gary DeBock has racked up.

    Reply
  8. Stephen Thomas Powell

    I received my GE Super Radio II from Chuck yesterday and have been listening ever since. It was in immaculate condition. It is the finest portable radio (appearance, form, function, performance) in my home. The audio is simply outstanding.

    I could not be happier.

    Reply
  9. Tom Laskowski

    I have a SRII that I bought new in or around 1984 that works great, but it’s becoming quite scratchy when tuning or adjusting the volume. I don’t use it much for DXing anymore, but I’d like to have it refurbed and cleaned at some point. Might have to send it Chuck’s way. 73.

    Reply
  10. Jamie Patterson

    I have a Superadio III. I am curious as to how to improve it. I know the varactor tuning is somewhat noisy. Not sure anything can be done. Do you think recapping the unit will be a clear improvement? Perhaps change the wide filter to a narrower one? 150s are a popular choice.

    Reply
    1. Chuck Rippel

      Not much to be done to quiet the digital tuning / varactor diodes. However, the re-cap and IF alignment process should improve the audio quality.

      Drop me an e-mail and I’ll send you an FAQ on the process then you can decide.

      [email protected]

      Reply
      1. Paul Ranmar

        chuck have a vintage GE 7-2990a radio it works lights etc but feel need s looked at cleaned serviced. one thing is wrong the tuning knob I feel either. broken tooth or cracked as when u turn it it is not smooth it still turns ok but would like to see if u will and do service these radios. let me know and how to contact u by phone thank u Paul

        Reply
  11. Walt Salmaniw

    As a recipient last week of my refurbished Super Radio II, I can attest to Chuck’s magical ability! I sent him a tired, dirty, semi-deaf receiver, and received an as-new radio. Thank you so much, Chuck!

    Reply
  12. Chuck Rippel

    It’d be kinda tough to widen the AM If as it is 4 tuned circuits but not impossible. Maybe take the 1st of 4th IF can electrically out of the circuit or spoil the Q on a couple of them. Sorry the 110 IF mod did not work. You probably got a filter that was not resonant on 10.7 MHz and even though 110 kHz is a little narrow, even for mono FM, it should have worked.

    I use 150’s but do a Bode Plot at 10.7 mhz on each filter to make sure it’s not off frequency.

    Reply
    1. les shamel

      hello chuck,I also have a GE3 superradio.Liked the video very much.I would like to recap my radio to up-grade the am and fm band and re-align it,iam not sure what that entells but i would like you to give me a ball park on the cost if you would do it for me.thank you; les shamel

      Reply
      1. Chuck Rippel

        The re-cap makes quite a difference in the audio quality on both AM and FM. Some of the SR-III circuits allow a filter change and I’d remove the 280 in it now and do a 150 or 180.

        Drop me an e-mail and I’ll send you and FAQ on the restore process. You can decide from there.

        Chuck
        [email protected]

        Reply
      2. Chuck Rippel

        Hi Les,
        I just finished doing everything to an SR-3 as I would to a SR-1 or II and am REALLY pleased with the results. It’s a good deal more complicated than the I or II but IMHO, this radio has gotten a bad reputation. Yes, it was earned but its not the fault of the design! After re-capping the radio, again using the audio grade caps that bring so much to the finished product. When the re-cap was finished, it turned the radio on to test the work I had performed and while the radio worked fine, it was as deaf as when I started.

        The cause of that problem turned out to be a horrible factory alignment job. The MW and FM IF’s were FAR from being peaked and the RF section was also way off. So, I peaked the 455 AM IF then performed the MW band RF alignments.

        The FM was next. I removed the barn door wide 280 kz IF filter and installed a 180 the swept the IF and as was the case with the AM, the 10.7 MHz IF was not even close to peaked. Went through the FM IF, peaked the RF section, aligned the tuning and AFC voltages.

        Wow! This SR-3 came ALIVE!!! Am using it as I write this and I think that every AM channel has a station on it. The FM sounds great and its hot. The SR-3 definitely has been the target of much criticism but the causes can clearly be addressed and much improved. I have a couple more caps to replace, 2 values I did not have one hand then I’ll do a video with this SR-3 and something else.

        Best,
        Chuck

        Reply
  13. Guy Atkins

    Thanks for sharing Chuck’s wonderfully upgraded SR3 with us through you article and video, Thomas! It’s audio is certainly sterling and makes up for its average AM selectivity. This great receiver simply begs the operator to slow down and enjoy the programming and audio quality of stations near and far.

    My SR3 is in similar near-new condition. A few weeks ago Chuck kindly shared his upgraded capacitors list and urged me take my Superadio to the next level. After hearing the improvement in the video, I’m more stoked than ever to replace the ~34 year old caps! My next patient on the radio surgery table is a Satellit 700, but after that, bring on GE’s benchmark MW portable :^)

    Reply
    1. Guy Atkins

      Oops, I meant “SR2” (same as Chuck’s model), not SR3. In my opinion the Superadio II is the real gem of the series. They don’t make ’em like this these days!

      Reply
  14. Jeff Benedict

    I have a GE Superadio III. Bought it new. I have used it pretty much continuously since I got it 20+ years ago. It’s plenty sensitive but the slide rule readout is so goofy, it is hard to just turn the dial and get the station I want. I have to tune something and unless it is really obvious (like the format) I have to listen awhile to know if it is what I want. Hard to check the frees on new ones. Digital dial chips and readouts are pretty cheap these days. Have you heard of someone adding a digital readout of AM?

    Reply
  15. Ray Robinson

    Great comparison – thanks for posting. You’re fortunate to have music on the AM band in your part of the world. Here in SoCal it’s all talk or foreign language!

    Reply
  16. ThaDood

    Here, I have the CC Radio+ and rge GE SR III. The CC Radio is a great AM / FM performer, but that IF on AM is wayyyyyyyyyyy too narrow. I on-purposely off-tune that radio +/-2kHz for better fidelity. Someday, I hope to change the IF on that to something wider. The GE SR III??? Not a bad performer for $50.00, when I bought it off a friend of mine in 1997, but I knew that the FM selectivity could be better. So, I did the Bruce Elving narrow band FM 110kHz TOKO IF filter MOD to it. And, totally threw-off the tuning doing so. That varactor diode tuning didn’t like the MOD, since sensitivity went way down on me. I 1/2-ass got it re-tuned, but it wasn’t until I’d gotten the service manual for that radio that I was able to do a proper alignment. Now, my GE SR III is a DX champ. So, be aware if you do that IF MOD on such a radio. That didn’t happen on other radios, like a Sangean ATS-803A, a Bose Acoustic Wave Radio, a Radio Shack headphone radio, and an AC Delco car stereo. Huh… Live & learn…

    Reply
    1. Chuck Rippel

      I just fully went through an SR-III and its a different radio. A good bit of work as its a more complicated circuit but it’s night and day.

      Chuck

      Reply
  17. 13dka

    Wow indeed! Are you sure you haven’t switched the SR II to the same station on FM? Just kidding, but there is so much top end on the audio while it appears to have even less hiss than the RF-2200, which has the second best audio frequency range! Really stunning and crazy how pristine it looks…I’m jealous now . 🙂

    Before I retreat to huff a little on my evening walk (j/k, I’m happy that it found its way to you, congrats!) …

    I wanted one of those a long time ago, because the GE Superradios were praised as affordable “DX machines” when I started to investigate MW DX more seriously back in the early 90s and I had just dug out some older book about MW DX somewhere that compared a lot of radios and praised the Superradios and particularly the SR II (even though IIRC the filters on them all were a bit too wide for the reviewer’s taste). The problem was that ordering stuff in the USA wasn’t a thing yet and I guess only few knew how to do that, and even if I knew – they were likely out of stock already when I heard of them. I’m glad this got much easier now and that I have a few radios that do pretty OK on MW. 🙂

    Reply
  18. Steve

    I still have and use my GE Superadio III that I bought new a long time ago. Works great and has great ability to pull in far off MW radio signals. Batteries last a long time.

    Reply
  19. Dane

    Wow!
    I own one of these fantastic radios and would love to have it recapped and refreshed.
    Thanks for the great story and video. And thanks to Chuck for keeping these great radios alive!
    Dane

    Reply
  20. Dave

    Wow Thomas, the Super Radio 2 does indeed sound amazing, and really clear compared to the others in your informal test, which were no slouches themselves. Major kudos to Chuck for keeping these fantastic receivers alive. In an age where few new AM portables with great performance are being made, keeping these hearty “oldies” going is a noble pursuit!

    Dave
    AA7EE

    Reply
  21. Chuck Rippel

    It sounds like you had as much fun comparing all the radios as I did re-working the SR-II. I have found radio to be “magic” since about age 8 or 1962. We lived in NE Ohio and my mother bought me a 6 transistor radio from a jewelry store in Lorain, OH for the princely sum of $4.95. There were no electronic stores in our area then. I remember taking that radio into the woods and listening to KYW in Cleveland (yes, KYW WAS in Cleveland then) and being able to hear the news. It was magic to me then and still is today.

    Fast forward to now. The magic of radio is taking a back seat to other forms of communication and while that is simply the march of progress, there are still memories of the magic of hearing the news while sitting in the woods in 1962…. The technical side of Radio has been both a hobby and career path. Yes, I am a ham but SWBC DX and being part of NASWA, Fine Tuning and Numero Uno took the #1 spot for enjoying radio as a hobby.

    The Super Radio I and II are “sleepers” in that they look fairly plain, are portables, have minimal signal tweaking features but perform well beyond what might be expected. Kinda like the 1968 Dodge Dart, family daily driver but instead of taking delivery with the usual “slant 6” under the hood, a pop of the latch reveals a 426 Hemi bolted to a 4 speed manual complete with Hurst shifter.

    There are no noisy varactor diodes to set the frequency and tune the RF stages in the SR-1 and II. Rather, there is a 6 section, split stator manual tuning capacitor which not only tunes the radio to a particular frequency but also tunes 2 RF sections on AM and 2 on FM for optimal sensitivity. Anyone remember the famed Radio Shack TRF radios? Same concept. I’d love to A/B an SR to a TRF. Wait till he tries the FM in the SR. The barn-door wide, stock 280 khz IF filter has been removed and replaced with a 150 kHz wide, quality Murata filter then the IF is re-aligned to that filter using one of, if the THE FM/FM MPX signal generators professionally offered, the Sound Technology 1000A.

    Thomas and The SWLing post continue to be a major contributor to the radio hobby and a “cup of coffee” while a contribution, was not up to the efforts it takes to find material and edit a blog which has benefited so many. So thanks, Thomas and enjoy the Super Radio!

    Reply
    1. Rob L

      Hi Chuck, I had fun with one of those $27 TRF radios when I was a kid. Often I picked up the same DX as other guys with Hammarlunds & big loops. 73s

      Reply
    2. Thomas H Carroll

      Hi Chuck, I just read the article on your recapping the GE Super Radio II & really enjoyed it. I rescued a SRII from a Flea market in Kansas City a couple years ago & it does have fantastic audio. I rescued it from some house painters as there were telltale paint spots left behind on the cabinet. I think it cost me $10.00 to $15.00 dollars at the time. Not sure how old it is but it sounds great.

      Tom Carroll
      KC0NVS

      Reply
  22. Stephen Thomas Powell

    Thomas,

    Just sent you a cup of coffee in appreciation of your SuperRadio post. I just purchased it from Chuck. I’m a radio enthusiast and have been since I built a crystal radio as a child. I’ve admired the classic SuperRadio for decades; the replaced/upgraded components sold me.

    Steve

    Reply
    1. Chuck Rippel

      Sure and there is another finished in about the same time frame: Am kind of surprised at that as my style of restoring radios (especially true of R390A’s) was to have only 1 on hand at a time. Some folks have a regular assembly line type operation and I would not want my gear to be treated that way.

      https://www.ebay.com/itm/184674995901

      I’m at:

      [email protected] and we’ll see if we can save you some $.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.