Category Archives: Accessories

A review of CozyPhones sleep headphones

A few months ago, SWLing Post contributor, Mario Filippi–being both a good friend and an (ahem!) enabler–sent the following note:

My XYL bought me a set of CozyPhones for Christmas.  If you like listening to the radio, especially at night while in bed, these work great. Speakers are nice and flat.  And if you are outdoors you can listen to shortwave and not suffer from ear frostbite hihi.

https://www.cozyphones.com/

[I’ve attached the photo below of] the one I got.  Absolutely amazing!

Little did Mario know that, back in 2014, I ordered a pair of similar sleep headphones by the company Acoustic Sheep after reading SWLing Post contributor Anil Raj’s brilliant entry in our Virtual Radio Challenge II.

I purchased an open-box pair of the Acoustic Sheep SleepPhones for about $33 and was very pleased with the purchased…initially, at least.

I used the Acoustic Sheep SleepPhones a couple nights a week for several months. I was disappointed, however, when the braided jacketing started coming off of the headphone cord, bunching up, and the rubberized jacketing underneath began staining my pillowcase, so I was no longer able to wear them at home or when traveling. My wife was amused and said it looked as if I had worn mascara to bed.  Well, at least until she attempted to clean the marks off of the pillowcase with limited success.

I feel it’s only fair to state that my SleepPhones were a fairly new product in 2014, thus may have been an early iteration and may not accurately reflect what the product is like currently. I’m guessing that Acoustic Sheep have improved the design and reinforced the jacketing since then, because they seem to enjoy relatively positive reviews on Amazon.

Panasonic Ergo Fit (in-ear) Headphones

At any rate, I set the troublesome SleepPhones aside and and went back to using my go-to in-ear sleep phones: the Panasonic Ergo Fit Headphones. The Panasonics are the least uncomfortable of all of the in-ear headphones and do a decent job of isolating any environmental noises while you sleep. Still, having something inside your ear while you slumber isn’t exactly the definition of comfort.

Enter CozyPhones

I replied to Mario’s email telling him about my experience with the SleepPhones. He encouraged me to give the CozyPhones a try.

I took a quick glance at Amazon (the only distributor I could find for CozyPhones) and the price for a pair was only $22. Almost $16 cheaper than a pair of new SleepPhones?  I even noticed combo packs with two sets of CozyPhones for $24. My doubts about quality resurfaced.

I decided to contact CozyPhones customer service directly and ask if their headphones were likely to experience the same problem as my SleepPhones–I mentioned my hesitancy and the fact these would likely be mentioned in a frank review (hint, hint: if quality is poor, this will get a negative review).

They promptly addressed my concerns, standing confidently behind their product, and even offered to send a sample. One week later, the CozyPhones arrived.

The CozyPhones arrived in a thick plastic re-sealable bag (seen above)–a nice touch! Included in the package were both the headphones and a satin carry bag.

Performance

Let’s be frank here: with sleep phones, I’m not expecting the same audio fidelity I would achieve with my Sennheiser HD558s––which, by the way, would be incredibly uncomfortable as sleep headphone; I simply wanted to be able to listen to my bedside radio as I drifted off.

Here’s what I do expect from a pair of sleep headphones:

  • decent audio fidelity at low volume levels–something suitable for listening to AM or shortwave radio
  • something with enough sound isolation that it won’t keep my wife awake while I listen to the Voice of Greece into the wee hours
  • comfort around my head and against my ears as I lie on a pillow…actually, this might be the #1 priority for me
  • headband’s earphones (speakers) stay in place, don’t shift within the band
  • quality construction and the potential for product longevity
  • no black marks on my pillowcase!

Let’s see how the CozyPhones deliver on my points:

Audio fidelity

The CozyPhones easily pass this test. I’m very pleased with audio fidelity for radio listening. Indeed, the audio response is pretty well tailored for AM/SW broadcast listening. FM and music sounds fine, too; good enough that I would consider wearing these in the winter while hiking. Again, these are not audiophile quality to be sure, but they surpass my needs for this application.

Sound isolation

The CozyPhones do a respectable job in this regard. My wife can’t hear what I’m listening to while lying in bed, not even a hint of what I hear. Now, if I were hard of hearing, listening to music and had the volume cranked up, I’m sure she’d at least hear percussive sounds.

Comfort

I should note hear that there are essentially four versions of CozyPhones:

CozyPhones sent me the second version mentioned above, the headphones with Cool Mesh lining and a lightweight Lycra-like exterior. I was quite pleased, as it’s what I would have selected. If anything, I tend to generate a lot of heat, so don’t like products that make me feel even warmer at night while I sleep.

After a few months with the CozyPhones I can say that I’m very pleased with how comfortable they are. The material is soft, the headphone speakers are very thin and seem to stay in place even as I move around and adjust my head on the pillow during the night.

Quality

The SleepPhones I purchased in 2014, in contrast, were also comfortable, but the earphones, essentially mini speakers, tended to migrate within the soft headband. I’d often wake up and find the speakers had completely moved within the band away from my ears; it was then a matter of trying to bunch up the headband material and re-position the speakers.

The CozyPhones don’t seem to have this problem. The ear speakers might shift a little some nights, but not enough to be annoying–certainly not as the SleepPhones initially did.

The braided headphones cord is non-obtrusive and comes out the back of the headphones. So far, the CozyPhones haven’t suffered the same fate as the SleepPhones–the braid has remained intact and seems quite sturdy, resilient to light tugging and normal movement.

And as for my pillowcase?  Still clean…no black marks.

Summary

If, like me, you enjoy listening to radio in bed, but don’t want to disturb your partner, CozyPhones really are a fantastic option.

Perhaps as a side effect of my years of SW listening, I find I’m a bit sensitive to environmental noises when I travel; often hallway noises, nearby traffic, children screaming, doors slamming, can disturb me, so I never leave home without earphones in my pack to quiet the noise. Quite often I’ll listen to my radio at bedtime, then, right before nodding off, I tune to a blank spot on the AM dial to the soothing sound of static. This “white noise” tends to drown out other abrupt environmental noises, and I find I drift off peacefully.

I think CozyPhones will serve you well. At $18-22 shipped? I think they’re a good bargain and a great gift. In fact, I intend to buy a pair for my wife!  Shhhh…don’t tell her.

Click here to view CozyPhones on Amazon.

Spread the radio love

Shortwave List: Cap’s shortwave schedule Android app now open to Beta testing

A few months ago, long-time SWLing Post contributor, Cap Tux, designed a simple shortwave schedule application for his Android phone. Though he never intended to make the app public, he shared it with me to test on my Moto G5 Plus.

Cap has recently decided that if others in the SWLing Post community would like to Beta test his app, they’re welcome to do so. He notes:

The app was created initially to meet my own requirements as at the time I was travelling a lot for my job and other apps I tried didn’t meet the requirements e.g. Broadcast stations only, filter by Station, Freq, Time, Language and more recently ‘Target Area’ which was added to the app very recently as I was initially using the AOKI list but found that EIBI was updated more frequently and tended to be more accurate.

I do miss some of the features and simplicity of the AOKI list as programming some of the code to respond to the amount of info in the EIBI list was challenging and there is still more that can be done. There is a bug on Android v4.4 (not my bug but the frameworks bug) which I have fixed in v1.1.10 which I can send through later.

I wrote this app as I needed a phone app for my portable radios (PL-660/PL-365) so I could search for shortwave stations using any combination of Station, Frequency, Language, Time (Specific, Real-time incl. day or Any!) or Target Area. The search can even take account of the day of broadcast so if it’s a Friday and the broadcast is only a Saturday, then it won’t show it.

Shortwave List Features:

  • Search the list using any combination of Station, Frequency, Time, Language, Time or Target Area
  • Only broadcast stations are included in the list
  • Scrollable list of stations based on search criteria
  • Get Station, Frequency, Times, Language, Target, Days on-air, Transmitter location and the Broadcasters country of origin of the selected broadcast by a tap on a station
  • Powerful search features with a simple interface
  • Search for specific broadcast times with any combination of Station, Frequency or Language, Target area with future or past times being searchable, although this lists all stations irrespective of the day (as you may want to know a time for a broadcast tomorrow, or yesterday)
  • Search for stations in real-time with any combination of Station, Frequency, Language or Target Area, so the app only lists broadcast stations on-air now (also takes the day into account, so, for example, a station listed as only on-air on a Friday will not show if today is a Saturday)
  • Search for stations transmitting at any time with any combination of Station, Frequency Language or Target Area

Future features in active development:

  • Update shortwave list from the internet

A few examples of use:

  • You hear a station in an unknown language, Select ‘ON AIR’ and enter the ‘Freq’, ‘SEARCH’ and the app will list the possible stations
  • You hear a station in English, select ‘ON AIR’ the ‘Language ‘ set to ‘English’ and enter the ‘Freq’, ‘SEARCH’ and the app will list the possible stations on that frequency right now
  • Want to know when a station is transmitting at a specific time? select the specific time by selecting the UTC time, set the Hour/Minute and enter the station name in the ‘Station’ box and ‘SEARCH’
  • You are listening to a SDR recording from last week and trying to identify a station, enter the ‘Freq’ and the specific UTC time (or ‘Language’ if known), ‘SEARCH’ and the app will list the possible stations
  • Want to tune into broadcasts right now in your language? no problem, just select ‘ON-AIR’ and select your ‘Language’ and ‘SEARCH’
  • List all broadcasts from a specific station, just enter the ‘Station’ name and click ‘SEARCH’
  • List all broadcasts on right now by selecting ‘ON-AIR’ and ‘SEARCH’

Phones that have been tested and will work (You will need Android v5.0.1 or above):

  • Samsung Galaxy S4/S7 (I think all the S series from S4 above should be fine as all have a good screen resolution)
  • Samsung Galaxy J3
  • Google Nexus 4
  • Moto G5 Plus

It should be noted that due to the number of low resolution display phones out there some will not be able to operate the app correctly at present due to the current layout of the components and recommend you use a phone with a decent screen resolution around 1080×1920. I plan to address the screen res issue soon.

What I need from Beta-testers who want to file bug reports:
Phone Make/Model:
Android version:
Shortwave List version in use:
Ease of use:
Speed/Performance:
What would you change/remove/add:
Any screen issues, layout problems or difficulty using a feature:

Please submit your feedback on my Twitter account: @swbcdx

Thank you, Cap!

Readers, please keep in mind that this application is not in the Google Play store because it’s in Beta. You’ll need to download the application to your phone, temporarily allow “Unknown Sources” (here’s a short tutorial), then install the app. It’s very important to only temporarily allow “Unknown Sources”–once this app is installed, please reinstate this security measure.

Please note: If you’re not comfortable downloading and installing an app that is not in the Google Play store, please simply wait for this app to hit the Google Play market possibly at some point in the future.

Click the following link to download the application file to install:

http://www.filedropper.com/shortwavelist-v119-no-permissions

This app requires no permissions. The trade-off is that updates to the schedules cannot be initiated without re-installing an updated app with new schedules embedded.

For what it’s worth, I really like this app! Very simple, effective and works offline.

Here are a few screenshots–I love how he’s kept the interface clean and simple:

Thanks again, Cap, for opening Beta testing to our community.

Please submit your feedback on Cap’s Twitter account: @swbcdx

Spread the radio love

eBay find: 2:1 Remote/Local Antenna Switch $26.99 shipped

Many thanks to Kenneth Crips who recently shared an eBay link to this antenna switch on the Gary J. Cohen’s Shortwave Listeners Global Facebook page.

The switch is not a kit–it is pre-built and appears to contain quality parts. The manufacturer, Electro Resales, makes a number of other products for the radio, astronomy, RC and model railroad markets. They have 99.9% positive feedback and a deep history of sales via eBay.

I’ve pasted the product description from eBay below:

Coaxial Electronic Switching unit for Antenna – 2:1 unit – Ready Built Unit

Switch 2 antenna to one radio or 2 radio to one antenna.

Using high quality Schrack Brand relays this antenna switcher works up to 200 MHz with SWR below 1:1 and minimal insertion loss.

Features include:
1. SO-239 input/output connectors
2. 8 Amp switching relay (Operation to 1 KW)
3. LED mimics indicate which port is active
4. Built in push switch for ease of operation – Selects relay coil to energize,
5. Remote installation operation possible
6. 1 KV Suppression capacitors and back EMF diodes on each relay coil
7. Relay coil : Capacitor tank frequency = 93 KHz – Minimizes RF interference on activation.
8. PCB Isolation Slots to minimize cross talk
9. 12 volt operation
10. Via stitching in critical signal paths and connector ground plane
11. Complete, self contained unit, ready to use. Not a Kit.

PCB dimensions are 4″ x 3.25″ (100 mm x 80 mm). Ready to mount in your installation

Pictures illustrate actual item that you will receive.

Questions – Please ask – Free Shipping as always

Sale includes:
1. Finished PCB with all components
2. Link to our on-line user guides

No other items such as power supplies, RF equipment or cables are included in the sale

I might purchase one of these as I have a remote antenna box with a solar-powered LDG ATU. This switch would allow me to change antennas without manually changing feed lines outside. I had planned to build a switch like this with my buddy, Vlado (N3CZ), but the price is awfully enticing! Have any SWLing Post readers purchased from this store before? If so, please comment.

Click here to view on eBay. 

Spread the radio love

Off-grid/RV enthusiasts need a radio-quiet solar charge controller: reader advice?

The Solar Boost 3000i solar MPPT charge controller

I’m currently in the process of adding 200-300 watts of 12-volt solar panels to my truck camper.

Solar panels will keep my camper’s 12V deep-cycle battery topped off, thus allowing longer stretches of time for boon-docking or primitive camping, during which an occupied camper is off-grid from shore power.

My truck camper actually came with a simple built-in charge controller which charges the battery via shore power. Thing is…this shore power charger is incredibly noisy when I’m on the radio.  The QRM it generates is broadband, and almost entirely wipes out HF and MW radio listening.

Because of this, I’m forced to unplug my power whenever I’m in the camper and want to hop on the air. And since the whole idea of camper living is to enjoy a bit of rest-and-relaxation, in other words, to pursue one’s hobbies in modest comfort, having to unplug the power––or else not play radio––limits my total enjoyment of RV camping.

But. Before I invest in a new solar charge controller, which would essentially charge the battery any time the sun is out, I need to be absolutely certain it doesn’t create RFI, too. Yet I’m finding it difficult to confirm whether a charge controller is RF-quiet prior to purchasing…

What’s more, I suspect I’m not the only radio listener or ham radio operator with an RV who has encountered the noise dilemma.

What’s a radio geek with an RV to do––?

A ham radio buddy who is an avid RVer recommended the Solar Boost 3000i (see top photo above). While it might be overkill for my application, I’m willing to invest, knowing it may charge without creating RFI.

But before I do, I’m curious if any SWLing Post readers have any experience with solar charge controllers, and/or can confirm models that create little to no RFI? I’d even appreciate knowing which models do pollute the spectrum––models to avoid, in other words, if radio listening or ham radio operations are your goal.

My hope is that SWLing Post reader recommendations may not only help me with this problem, but might help other RVer/off-grid radio enthusiasts, as well.

Please comment!

Spread the radio love

A new Heathkit: The Precision RF Meter – HM-1002

Heathkit recently sent the following link to their “Insiders” email list:

Dear Heathkit Insider

We have opened advance orders for our newest product, the HM-1002 Heathkit® Precision RF Meter™, for our most loyal customers and fans. This is the first amateur radio accessory and the first test equipment kit Heathkit has produced in over 30 years.

We believe the Heathkit® Precision RF Meter™ is a landmark achievement in RF meters, in both technical features and price/performance. It is most suitable for amateur radio operators and for customers who use RF test equipment.

Its patent-pending design offers features not available in other power/SWR meters: Transmit frequency display, ERP display, efficiency measurement, many forms of peak power monitoring, smart alerting, both SWR and Return Loss, user-selected units (e.g. watts or dBm), autoranging for both power and frequency, QRP and QRO, superior ergonomics, and more. It’s about five times more accurate than our previous power/SWR meters, at an affordable price and exceptional quality. And it’s a Heathkit.®

This early make-to-order offering gives our most loyal customers a first-in-line position when this kit ships, probably at about the end of the summer. To thank you for your loyalty and trust, Heathkit will waive and pay standard-rate shipping on initial pre-sales orders to anywhere in the world we ship. Limit is two units per customer at this time.

If you’re the kind of builder who doesn’t want to be last in line for the best new equipment or the latest Heathkit®, this is for you. Please see our product web page for more information. Be sure to read all the pre-order details, including how to complete your order. We welcome your pre-order.

Sincerely,

the Heathkit Team

Pre-order pricing for the HM-1002 is $575.00 US.

Spread the radio love

Ron discovers a new VLF converter

Many thanks to SWLing Post contributor, Ron, who writes:

A firm in the UK is now offering new VLF converters in built, ready to go form or in kit form.

Coverage is 10-500 khz full LW band or 0.1-100 kHz ELF band.

Your choice of stock or SO239, BNC or RCA connectors for antenna input and converter output.

Powered by a nine volt battery.

In addition a special 630m version is available tuned for max performance on 475 kHz in the middle of the 630m band.

Click here to view on eBay.

Thanks for the tip, Ron! Based on the photos, the construction looks to be of very good quality. There are so few VLF converters on the market–please share your review when you’ve had a chance to evaluate it!

Spread the radio love

How to build a Milk Crate AM Broadcast Loop Antenna

Many thanks to SWLing Post contributor, James Townley, who shares the following guest post originally posted on his Shortwave/Medium Wave blog:


540 kHz to 1700 kHz Loop Antenna (Click to enlarge)

AM Broadcast Loop Antenna

by James Townley

Several years ago, I became interested in medium wave DXing. One of my limitations was the size of my yard, so I developed an interest in tuned loop antennas to compensate, because setting up a beverage antenna was out of the question. I experimented with different sizes of loops, and found that the bigger the aperture, the more gain the loop would have. The tuned loop antenna is also very directional, which allows you to reject, or null out interference from either noise or other stations. Loops are considered bi-directional in that they receive to the front and back, but not to the sides. The tuned loop antenna quickly became my weapon of choice for medium wave DXing.

Recently when the weather began allowing me to enjoy the outdoors, I decided to make another smaller loop antenna from a plastic milk crate I had lying around. I saw the idea on the internet when I observed that someone had used a milk crate for their loop. Click here to see a variety of tuned loop antennas that others have made. Whichever material you decide to make your loop antenna from, just make sure that it is not a conductive material. Wood, plastic, and cardboard seem to be popular materials for loop making. In the photo above, I am using my Sony ICF-2010 to listen to WCCO on 830 kHz. This station is nearly 200 miles south of me, but I am able to receive it with 9 LEDs lit on my signal strength meter while using the loop. There is no direct connection of the loop to the radio, it is inductively coupling with the radio’s own ferrite rod antenna.

If you are interested in making a loop antenna like mine, here are the materials you will need:
120 ft of 18ga insulated wire (I bought a 100 ft spool of cheap speaker wire and pulled the 2 conductors apart):

1 – Plastic milk crate
1 – 15 to 365 pF air variable capacitor (found in many old radios, or a google search to buy one from an internet store)
1 – Tuning knob. Any knob will do as long as it fits the shaft on the variable capacitor.
1 – Tape or wire ties. I used tape to secure the wire while winding, then hot glue when finished.

When you begin to wind your coil, use tape or a wire tie to secure the wire, and leave about a foot of wire. This extra foot of wire will later be soldered to the frame on the capacitor. As you wind your coil, pull the wire snugly and with each turn leave about a quarter inch spacing between each turn. The spacing isn’t critical as long as the spacing is consistent.  I wound 21 turns on my crate. This may differ for you, depending on the size of your crate, or the value of you capacitor. If you find that the bottom frequency isn’t low enough, you can add more wire to make a few more turns. This will lower the bottom frequency for you.

After winding the coil, you can solder each end of the coil to your capacitor. The beginning of the loop gets soldered to the frame of the capacitor, and the other end of the coil to the rotor solder lug on the side of the capacitor. If you do not have a soldering iron, you can use alligator clips to connect your loop coil to the capacitor as well. I secured my capacitor to the inside corner of the crate with hot glue. I put a generous amount of the hot glue onto the bottom of the capacitor frame, and held it to the crate until the glue cooled enough for the capacitor to stay on it’s own. I used enough to get the job done, but not so much that it interfered with the plates in my capacitor. The hot glue seemed to adhere very well. I then checked the spacing of my coil turns, and secured them with the hot glue as well.

I was very impressed with the results after spending some time with the loop. It’s small enough to maneuver around easily, but big enough to give it some gain, so I can listen to daytime DX. I may make another tuned loop using two crates to see how much more gain I get with the larger aperture.

Happy DXing,
James Townley


Many thanks, James, for sharing your project with us! This loop appears to be relatively simple and accessible even to those with little knowledge of soldering or homebrewing. I’m now wondering how a loop made of four milk crates might perform!

Click here to view James’ Shortwave/Medium Wave blog.

Spread the radio love