Category Archives: News

The new Elecraft K4

Today, prior to the open of the 2019 Hamvention, I had an opportunity to hang with the folks at Elecraft and grab some photos of their newest transceiver: the Elecraft K4 direct-sampling SDR (click here to read the announcement).

Elecraft has now published a K4 product page on their website with information about pre-orderswith information about pre-orders. In short, the base model—which includes two full receivers—starts at $3999 US.

Wayne Burdick told me that they expect to start shipping the K4 by the end of 2019.

I snapped a number of photos of the two engineering prototypes of the K4 this morning in Building 1 at the 2019 Hamvention.

Elecraft K4 Photos

Click on the images below to enlarge:

: The new Elecraft K4

Spread the radio love

Elecraft introduces the K4 high-performance direct-sampling SDR

3 Replies

Click to enlarge (Source: K4 Product Brochure)

Today we learned about the latest addition to the Elecraft product line, the Elecraft K4.

This fills a niche in the Elecraft product line and is certain to directly compete with the likes of the Icom IC-7610 and a number of Flex Radio transceivers, among others.

Elecraft describes the K4 as having a “modular hybrid architecture”. Below, I’ve pulled the text and images from the Elecraft product brochure.

Wayne Burdick (N6KR) of Elecraft notes that tomorrow (Friday, May 17, 2019) the Elecraft site will (re)launch a K4 product page with pre-order/reservation page.

I plan to learn more about the K4 and report back during Hamvention this week. Stay tuned by bookmarking the tag Elecraft K4:

Elecraft K4 Product Information

(Source: Elecraft K4 Product Information Sheet via Lutz Electronics, Switzerland)

Click to enlarge (Source: K4 Product Brochure)

A direct-sampling SDR you’ll love to use

Our new K4 harnesses the latest in signal processing while retaining the best
aspects of the K3S and P3. The resulting user interface makes the technology
transparent, allowing you to focus on working the world.

160-6 meter, all-mode coverage & dual RX

The K4 includes dual receive over 100 kHz to 54 MHz. Since it utilizes direct
sampling, there’s no need for crystal filters in the K4 or K4D (see Models, back
page). For extreme-signal environments, we offer a dual superhet module
(standard in the K4HD). An internal VHF/UHF module is also planned.

High-resolution mini-pan for each receiver

Our advanced fine-tuning aid, with its resampled bandwidth as narrow as +/- 1
kHz, is displayed separately from the main panadapter. You can turn it on by
tapping either receiver’s S-meter or by tapping on a signal of interest.

Simple operation and setup

The K4 features a large, full-color touch display, combined with a rich set of real
controls. Per-VFO transmit metering makes split mode completely foolproof.
Band-stacking switches and per-receiver controls are both intuitive and versatile,
adapting to operating context. Usage information on these and other features
is just one tap away, thanks to our built-in help system.

Click to enlarge (Source: K4 Product Brochure)

Rich I/O complement

The rear panel includes all the RF, analog and digital I/O you’ll need to complete
your station. All K-line accessories are supported, including amps, ATUs, and our
K-Pod station controller. The HDMI video output supports an external display
with its own user-specified format.

Full remote control from multiple devices

The K4 can be 100% remote controlled, via Ethernet, from a second K4 as well as
a PC, notebook, or tablet. Panadapter data is included on all remote displays.

Modular hybrid architecture

The K4 adapts to your needs, with three models to choose from:

Basic K4 with wide-range dual receive
K4D with diversity receive
K4HD with a dual superhet module for exceptional dynamic range

You can upgrade or add options as desired, or as new technology becomes
available. This extensibility applies to software as well. The K4’s powerful, fast-starting CPU provides unlimited expansion opportunities.

Fast signal processing

The RF signal chain in the K4 incorporates parallel hardware processing of data
streams, including a dedicated DSP subsystem. This, combined with silent,
PIN-diode T/R switching, ensures fast CW break-in. Data and speech-processing
delays are also minimized.
Standard DSP features include easy-to-adjust, per-mode RX/TX EQ; clean,
punchy RF speech processing; full DVR capabilities; and several built-in data
decode/encode modes. Direct-sampling technology results in an ultra-flat
passband response for clean RX and TX audio. Since the signal chain is softwaredefined, the DSP can be field upgraded to add new algorithms and operating
modes.

KAT4 ATU

The KAT4 ATU has a nominally 10:1 matching range. It includes 3 antenna jacks,
any one of which can be selected as an input for one or both receivers.

Internal VHF/UHF module (future option)

An expansion slot is reserved for a high-performance VHF/UHF module, with
output of approximately 15 W. This module will support all modes.

Kit version

A no-soldering kit version of the K4 is planned for later release. Builders will learn
about advanced radio technology as they proceed. All modules are pre-aligned
and tested.

K4 Key Specs and Features

Size: 4.5”Hx13.5”W,10”D
Weight: Approx.10lbs
SupplyVoltage: 12-15VDC
Current: ~2ARX,~18-23ATX
FrequencyRange: 100kHz-54MHz(VHF/UHFrangetobe determined*)
Stablility: +/-0.25ppm(TCXO) Modes: CW, SSB, AM, FM, Data
LCD: 7”color;touch&mousecontrol Text modes: CW, PSK31/63, RTTY KAT4ATU:
10:1+range;3ant.jacks RXantennasources: Upto5
A-to-D Converter(s): 16 bits
I/O: USB-Ax3,USB-B(twovirtualcomports+audio),RS232(DE9), Ethernet, HDMI. front/rear mic, front/rear phones, LINE in/out, speakers,PTTin,KEYout,paddle,key, ACC,12Vout.
CWQSK: Silent,PIN-diodeswitched
Other: RX/TX EQ, real-time clock,100% remote control including panadapter data, remote antenna switch control*, custom in-box software apps*

Models (K4 & K4D upgradeable by the user at any time)

K4: Basic K4 transceiver provides 160-6 m, all-mode coverage; 100 W output; five receive RF sources; and wideband dual watch, allowing the main and sub receivers to be set for the same or different bands.
K4D: Adds KDIV4 option, with a second set of band-pass filters and additional direct- sampling ADC module. This allows the two receivers to use different antennas – a requirement for diversity receive. Having two sets of band-pass filters also optimizes signal handling when the receivers are on different bands and/or antennas.
K4HD: Includes all of the above, plus our dual superhet module, the KHDR4. Ideal for competitive field day, contesting, and DXpedition stations. Each superhet receive section includes two crystal filters: one SSB/data bandwidth, one CW bandwidth. The superhet’s 8 MHz IF has excellent dynamic range, so additional crystal filters are not required.

Spread the radio love

The Hermes-Lite SDR: an open source HF transceiver based on a broadband modem chip

2 Replies

Many thanks to SWLing Post contributor, Pete Eaton, who writes:

Don’t know if you are familiar with this project, a full blown 5 watt HF SDR Transceiver for less than $300!

No sound cards, DUC/DDC architecture.

Here’s the project description by Steve Haynal via YouTube:

The Hermes-Lite is a low-cost direct down/up conversion software defined amateur radio HF transceiver based on a broadband modem chip and the Hermes SDR project. It is entirely open source and open hardware, including the tools used for design and fabrication files. Over 100 Hermes-Lite 2.0 units have been successfully built.

The FOSSi Foundation is proud to announce Latch-Up, a conference dedicated to free and open source silicon to be held over the weekend of May 4th and 5th in Portland, Oregon, USA. Latch-Up: a weekend of presentations and networking for the open source digital design community, much like its European sister conference ORConf. Produced by NDV.

Click here to view this presentation on YouTube.

Fascinating! Thank you for sharing, Pete!

Spread the radio love

The EDXC Conference to be held in Andorra September 6-8

Court Finds RM Broadcasting Must Register as a Foreign Agent

2 Replies

Many thanks to SWLing Post contributor, Ed, who shares this update regarding RM Broadcasting:

(Source: Department of Justice, Office of Public Affairs)

FOR IMMEDIATE RELEASE
Monday, May 13, 2019

Court Finds RM Broadcasting Must Register as a Foreign Agent

U.S. District Court Judge Robin L. Rosenberg has ruled that a Florida-based company, RM Broadcasting LLC (RM Broadcasting), was acting as an agent of a foreign principal and must register as such under the Foreign Agents Registration Act of 1938 (FARA).

The Department of Justice contended in a civil counterclaim that RM Broadcasting has been acting as an agent of the the Federal State Unitary Enterprise Rossiya Segodnya International Information Agency (Rossiya Segodnya), a Russian state-owned media enterprise created by Vladimir Putin to advance Russian interests abroad. The litigation marked the first FARA civil enforcement action since 1991. Assistant Attorney General for National Security John C. Demers and U.S. Attorney Ariana Fajardo Orshan for the Southern District of Florida made the announcement.

“The American people have a right to know if a foreign flag waves behind speech broadcast in the United States,” said Assistant Attorney General Demers. “Our concern is not the content of the speech but providing transparency about the true identity of the speaker. This case shows that the Department can and will utilize all of its tools to bring transparency to efforts by foreign entities to influence the American public and our government, and demonstrates our renewed effort to enforce FARA rigorously.”

“While the right to free speech remains paramount to our democracy,” U.S. Attorney Ariana Fajardo Orshan said. “FARA ensures that the American public is fully cognizant of the true source of the messages broadcast in the United States. Armed with full information, Americans may properly evaluate the value of the speech they hear. As such, FARA is a fundamental tool in our continuing efforts to defend our democracy.”

In November 2017, RM Broadcasting and Rossiya Segodnya entered into a services agreement pursuant to which RM Broadcasting would provide for the broadcast of Rossiya Segodnya’s “Sputnik” radio programs on AM radio channel 1390 WZHF in the Washington, D.C. region. Under this agreement, RM Broadcasting could not alter Rossiya Segodnya’s radio programs in any way. As the services agreement established Rossiya Segodnya’s direction and control over RM Broadcasting, the FARA Unit of the National Security Division informed RM Broadcasting that it was acting as a publicity agent and an information-service employee of Rossiya Segodnya and was required to register as an agent of a foreign principal.

RM Broadcasting initiated the proceeding in the Southern District of Florida seeking a declaratory judgment that it did not have to register as an agent of a foreign principal. The Department responded by filing a counterclaim seeking an injunction to require RM Broadcasting to register. Earlier this week, the court granted the Department’s motion for judgment on the pleadings. A final judgment directing RM Broadcasting to register under FARA is expected.

This case was handled by Assistant U.S. Attorney Matthew J. Feeley and Trial Attorney Nicholas Hunter of the National Security Division’s Counterintelligence and Export Control Section.

About FARA

The purpose of FARA is to protect the national defense, internal security, and foreign relations of the United States by requiring public disclosure by persons engaging in political activities and other activities for or on behalf of foreign governments, foreign political parties and other foreign principals so that the Government and the people of the United States may be informed of the identity of such persons and may apprise their statements and actions in the light of their associations and activities.
Component(s):
National Security Division (NSD)
USAO – Florida, Southern
Press Release Number:
19-519