Radio Waves: FCC Fines Drone Retailer, High School WSPR Buoy, Flashing Radio Firmware, and “Radio Recliner” Powered by Senior Resident DJs

Radio Waves: Stories Making Waves in the World of Radio

Because I keep my ear to the waves, as well as receive many tips from others who do the same, I find myself privy to radio-related stories that might interest SWLing Post readers. To that end: Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

Many thanks to SWLing Post contributors Ron, Pete Eaton, Paul Evans, and Jennifer Gulley for the following tips:

FCC Fines HobbyKing Nearly $3 Million for Marketing Unauthorized Drone Transmitters (ARRL News)

The FCC has issued a Forfeiture Order (FO) calling for HobbyKing to pay a fine of $2,861,128 for marketing drone transmitters that do not comply with FCC rules. An FCC Enforcement Bureau investigation stemmed in part from a 2017 ARRL complaint that HobbyKing was selling drone transmitters that operated on amateur and non-amateur frequencies, in some instances marketing them as amateur radio equipment. The fine affirms the monetary penalty sought in a June 2018 FCC Notice of Apparent Liability (NAL). The FCC said its investigation found that dozens of devices marketed by the company transmitted in unauthorized radio frequency bands and, in some cases, operated at excessive power levels. “Such unlawful transmissions could interfere with key government and public safety services, like aviation systems,” the FCC said.“We have fully considered HobbyKing’s response to the NAL, which does not contest any facts and includes only a variety of legal arguments, none of which we find persuasive,” the FCC said in the FO. “We therefore adopt the $2,861,128 forfeiture penalty proposed in the NAL.”[…]

High School Marine Buoy Transmitter Now Active on 20-Meter WSPR (ARRL News)

Phil Karn, KA9Q; Randy Standke, KQ6RS, and members of the Mount Carmel High School Amateur Radio Club (MCHSARC) in San Diego have constructed and deployed an amateur radio marine buoy in the Pacific. The buoy, which transmits WSPR on 14.0956 MHz USB, has already been heard around the continental US, Brazil, Hawaii, Japan, Costa Rica, Australia, and South Africa.

“Over the past year, Randy and I have mentored the MCHSARC in designing and constructing a simple marine buoy that was deployed from the RV Sally Ride [on July 16], about 700 kilometers off the coast of southern California,” Karn said in a post on the AMSAT Bulletin Board. “It is up and transmitting WSPR on 20 meters using the call sign KQ6RS, and is being received all over the US and into Canada and Brazil.” Karn is blogging about the project with updates.

The electronics are the 20-meter WSPR version of the WB8ELK “pico tracker” that has been flown on long-duration balloons. “We removed the solar panels and substituted 21 ordinary alkaline D cells, wired to supply 4.5 V,” Karn explained. “We estimate battery lifetime will be 6 months.”

[…]The first reception report was on July 16 at 12:52:30 UTC from grid square CL89eu, although the current carried the buoy east into CL89fu at 20:32:30 UTC. The buoy (KQ6RS-1) can be tracked on the APRS and WSPRnet sites.[…]

Stop Bad Laws Before They Start (Hackaday)

With everything else going on this summer, you might be forgiven for not keeping abreast of new proposed regulatory frameworks, but if you’re interested in software-defined radio (SDR) or even reflashing your WiFi router, you should. Right now, there’s a proposal to essentially prevent you from flashing your own firmware/software to any product with a radio in it before the European Commission. This obviously matters to Europeans, but because manufacturers often build hardware to the strictest global requirements, it may impact everyone. What counts as radio equipment? Everything from WiFi routers to wearables, SDR dongles to shortwave radios.

The idea is to prevent rogue reconfigurable radios from talking over each other, and prevent consumers from bricking their routers and radios. Before SDR was the norm, and firmware was king, it was easy for regulators to test some hardware and make sure that it’s compliant, but now that anyone can re-flash firmware, how can they be sure that a radio is conformant? Prevent the user from running their own firmware, naturally. It’s pretty hard for Hackaday to get behind that approach.[…]

New Internet Radio Station Helps Seniors Share Their Favorite Music (NPR)

A new internet radio station called Radio Recliner has started during the coronavirus pandemic. It gives residents in senior living facilities a chance to share some of their favorite music.

Click here to check out the Radio Recliner website.

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

New Technician HF Privileges Defined: ARRL board accepts final recommendations of the Band Planning Committee

103 Replies

(Source: ARRL News)

During this session, the [ARRL] Board took the following actions:

Accepted the final recommendations of the Band Planning Committee. Committee chair and ARRL First Vice President Mike Raisbeck, K1TWF, introduced the motion to adopt the plan. An earlier draft of the plan was introduced at the Board’s in-person January meeting. After the January Board meeting, the Committee received and considered hundreds of comments from interested amateurs. The final band plan can be viewed on the ARRL website.

The new plan only applies to the HF band and makes no changes to 160 and 60 meters. A couple other notes from the accepted plan:

No changes to CW allocations throughout all amateur bands
RTTY and all other narrowband, non-ACDS modes permitted wherever data
modes are allowed

As you read through the changes, keep in mind that the new plan addresses expanded Technician HF privileges and also re-defines ACDS (Automatically Controlled Digital Stations) allocations among other modifications.

Technicians will be happy to note they’ll have new phone and image privileges on 80 meters (3,900 – 4,000 kHz), 40 meters (7,225 – 7,300), and 15 meters (21,350 – 21,450 kHz).

Click here to download a PDF of the accepted (final) proposed plan.

Spread the radio love

Silphase R1 videos and information about power and antenna ports

2 Replies

We’re starting to get a little more info about the recently posted Silphase R1 SDR receiver. At this point, the radio isn’t in production and is obviously only in a prototype stage so there are a lot of question marks–including if it’ll ever come to fruition. The pandemic is obviously not an ideal time to launch and produce a new high-end radio. I, for one, certainly hope they do!

Many thanks to SWLing Post contributor, Mark Hirst asked Silphase about R1 external antenna support and power options. A Silphase representative replied:

“We are constantly redesigning the rear panel receiver Silphase R1, so we
can say for sure that there are 4 connectors – antenna F-type connector,
12.6 V power/charging, RJ-45 and USB”

And thanks to SWLing Post contributor, Paul, who received the following info from Silphase:

You can watch real videos on our YouTube channel.

https://www.youtube.com/channel/UCQN8YbKULHlkA4KBFt76Hhg

Sample videos:

Click here to view all of the videos on the Silphase YouTube channel.

As we learn more about the Siplase R1, we’ll publish it on the Post with the tag: R1.

Spread the radio love

Converting Tecsun signal meter numbers into five strength units?

8 Replies

Many thanks to SWLing Post contributor, Chris Rolfe (M3OZP), who writes with the following inquiry:

Don’t know if anyone can help.

I have a Tecsun PL-880, and it shows signal strength in db. How can I work out the signal strength as 1 to 5? All my other radio have 1 to 5 signal strength meters which is what I have always been used to.

Many thanks.

Chris Rolfe
M3OZP

Thank you for your question, Chris. The signal meter on the PL-880 and a number of other late-model Tecsuns that use similar DSP chips share the signal display which indicates both the signal strength and signal-to-noise ratio. I believe the dBu number indicates the conducted voltage across the receiver’s internal resistance.

It’s perhaps one of my quirks, but as a listener I actually pay little attention to signal displays on portables unless I’m evaluating signal strength for a report or even using it to locate a local noise. Converting those numbers into an S1 to S5 number is simply something I would do by “guesstimating.” Yeah, not terribly scientific.

There are folks in the SWLing Post community who can do a much better job explaining the readout and how to interpret/convert signal strength across the MW, SW and FM bands.

Post Readers: Please comment if you can shed some light on simplifying signal strength for Chris.

Spread the radio love

Giuseppe’s reception of the LRA36 test broadcast

3 Replies

Photo from the Argentine Antarctic Base (LRA36) – Source: RAE

Many thanks to SWLing Post contributor, Giuseppe Morlè (IZ0GZW), who shares the following:

Dear Thomas

Here is the link of to video regarding the transmission of LRA 36 in USB mode Saturday July 25, 2020 from 17.00 UTC on 15.476 MHz.

A good result if I think it was almost impossible to listen to it with the sun still high … the place where I listen, in Formia, Italy, is really excellent.

73. Giuseppe Morlè iz0gzw.

Thank you for sharing this, Giuseppe! I’m always impressed with the DX you catch there at your location in Formia! Grazie e ciao!

Spread the radio love

NASA’s SCAN testbed was an orbiting multi-function SDR

2 Replies

SCAN Testbed (Source: NASA)

Many thanks to SWLing Post contributor Dan (VR2HF) who writes:

“This looks like the world’s most expensive SDR to me. And a little mysterious. Like quantum computing!”

(Source: NASA)

Space Communications and Navigation (SCAN) Testbed

The SCAN Testbed, formerly known as Communications, Navigation, and Networking reConfigurable Testbed (CoNNeCT), served as a test facility for NASA research on radio communications and the Global Positioning System (GPS).

SCAN Testbed on International Space Station (Source: NASA)

The SCAN Testbed was launched on July 20, 2012 on a Japanese H-IIB Transfer Vehicle and installed in the International Space Station to provide an on-orbit, adaptable software-defined radio (SDR) facility with corresponding ground and operational systems. This permitted mission operators to remotely change the functionality of radio communications through software once deployed to space, offering them flexibility to adapt to new science opportunities and recover from anomalies within the science payload or communication system.

The SCAN Testbed payload was used to conduct a variety of experiments with the goal of further advancing other technologies, reducing risks on other space missions, and enabling future mission capabilities.

After seven successful years, and more than 4,200 hours of testing, it was decommissioned June 3, 2019 as it burned up in the trunk of SpaceX CRS-17 upon reentry into Earth’s atmosphere.

To learn more:
Communications Testbed Leaves Legacy of Pioneering Technology
2019 Space Technology Hall of Fame: Ka-Band Software-Defined Radio (SDR)/Harris AppSTAR™ Architecture
NASA’s Space Communications Testbed
Unique Testbed Soon will be in Space
SCAN Testbed Celebrates One Year Anniversary
Glenn Research Center SCAN Testbed

Thank you for sharing this, Dan! I had never heard of the SCAN testbed. I can only imagine what it might have been capable of accomplishing from orbit. I dare say there are even more powerful SDRs orbiting the planet at this moment!

Spread the radio love

FTIOM & UBMP to test 9670 kHz on Channel 292

Leave a reply

From the Isle of Music and Uncle Bill’s Melting Pot will be testing 9670 kHz on Channel 292 from Germany on Friday, August 7. Times are included in the transmission schedules below. Dxers beyond Europe are encouraged to try the broadcast as its effective range is uncertain at this writing.

From the Isle of Music, August 2-8:
This week by popular demand we repeat an episode we did with Kiki Valera several months ago.
The broadcasts take place:
1. For Eastern Europe but audible well beyond the target area in most of the Eastern Hemisphere (including parts of East Asia and Oceania) with 100Kw, Sunday 1500-1600 UTC on SpaceLine, 9400 KHz, from Sofia, Bulgaria (1800-1900 MSK)
If you don’t have a shortwave radio or are out of range, you can listen live to an uplink from a listening radio in the Netherlands during the broadcast at
http://websdr.ewi.utwente.nl:8901/?tune=9400am
2. For the Americas and parts of Europe, Tuesday 0000-0100 on WBCQ, 7490 kHz from Monticello, ME, USA (Monday 8-9PM EDT in the US).
If you don’t have a shortwave or are out of range, you can listen to a live stream from the WBCQ website here (choose 7490): http://www.wbcq.com/?page_id=7
3 & 4. For Europe and sometimes beyond, Tuesday 1900-2000 UTC and Saturday 1200-1300 UTC on Channel 292, 6070 kHz from Rohrbach, Germany.
If you don’t have a shortwave radio or are out of range, you can listen live to uplinks from various websdrs in Europe.
5. NEW: For Europe and possibly beyond, Friday 1800-1900 UTC on Channel 292, 9670 kHz from Rohrbach, Germany. If you don’t have a shortwave radio or are out of range, you can listen live to uplinks from various websdrs in Europe.
Our Facebook page is https://www.facebook.com/fromtheisleofmusic/
Our V-Kontakte page is https://vk.com/fromtheisleofmusic
Our Patreon page is https://www.patreon.com/tilford

Uncle Bill’s Melting Pot, August 2, 4 and 7:
Episode 176 features music from in and around Albania.
The transmissions take place:
1.Sunday 2200-2300 (6:00PM -7:00PM EDT) on WBCQ The Planet 7490 kHz from the US to the Americas and parts of Europe
If you don’t have a shortwave or are out of range, you can listen to a live stream from the WBCQ website here (choose 7490): http://www.wbcq.com/?page_id=7
2. Tuesday 2000-2100 UTC on Channel 292, 6070 kHz from Rohrbach, Germany for Europe.
If you don’t have a shortwave radio or are out of range, you can listen live to an uplink from different web SDRs in Europe
including a live uplink from a listening radio in the Netherlands at http://websdr.ewi.utwente.nl:8901/?tune=6070am
3. NEW: Friday 1900-2000 UTC on Channel 292, 9670 kHz from Rohrbach, Germany for Europe and beyond.
If you don’t have a shortwave radio or are out of range, you can listen live to an uplink from different web SDRs in Europe including a live uplink from a listening radio in the Netherlands at http://websdr.ewi.utwente.nl:8901/?tune=9670am
Our Facebook page is https://www.facebook.com/UncleBillsMeltingPot/
Our V-Kontakte page is https://vk.com/fromtheisleofmusic
Our Patreon page is https://www.patreon.com/tilford

Spread the radio love