Tag Archives: Ham Radio

Wired: Hunting Radiosondes

Image source: NOAA

(Source: Wired via David Korchin)

SOME RETIREES TAKE up fly fishing. Others pick up golf. But when Roland—or “F5ZV,” as he’s known on ham radio—left his job in Belfort, France a decade ago, he devoted his newfound leisure to a far more peculiar hobby: hunting radiosondes.

The white plastic boxes contain instruments to measure things like wind, temperature and humidity; meteorologists send them skywards on balloons, and they transmit data back over radio waves. But somewhere around 100,000 feet, the balloons burst, and the radiosondes parachute back to earth.

Roland began using a radio receiver and antenna to track them to the rooftops, parking lots, and random cow pastures where they land. “He was completely obsessed with radiosondes,” says Swiss photographer Vincent Levrat, who documents the chase in his quirky series Catch Me If You Can. “He would wake up at night just to hunt.”

By Roland’s own estimation, there are hundreds of other radiosonde hunters across Europe who monitor launch schedules for weather station balloons. They begin each hunt by using software called Balloon Track to predict the general area where a radiosonde might land; Balloon Track calculates the trajectory based on wind speed and burst altitude.[…]

Click here to read the full article on Wired.

Spread the radio love

ARRL Requests HF Privileges for Technician Licensees

(Source: ARRL via Ron)

ARRL has asked the FCC to expand HF privileges for Technician licensees to include limited phone privileges on 75, 40, and 15 meters, plus RTTY and digital mode privileges on 80, 40, 15, and 10 meters. The FCC has not yet invited public comment on the proposals, which stem from recommendations put forth by the ARRL Board of Directors’ Entry-Level License Committee, which explored various initiatives and gauged member opinions in 2016 and 2017.

“This action will enhance the available license operating privileges in what has become the principal entry-level license class in the Amateur Service,” ARRL said in its Petition. “It will attract more newcomers to Amateur Radio, it will result in increased retention of licensees who hold Technician Class licenses, and it will provide an improved incentive for entry-level licensees to increase technical self-training and pursue higher license class achievement and development of communications skills.”

Specifically, ARRL proposes to provide Technician licensees, present and future, with phone privileges at 3.900 to 4.000 MHz, 7.225 to 7.300 MHz, and 21.350 to 21.450 MHz, plus RTTY and digital privileges in current Technician allocations on 80, 40, 15, and 10 meters.[…]

Click here to read the full article via the ARRL.

Spread the radio love

NBC: “Hawaii’s communication breakdown and how going ham could save us”

Many thanks to SWLing Post contributor, Curtis, who shares the following video from NBC Left Field:

Hawaii’s recent false nuclear missile alert showed us how reliant we are on cell phones and modern technology—and how unprepared we are if they become inaccessible. But in case the unexpected happens, an unlikely group of hobbyists—ham radio operators—are standing at the ready and may save us all.

Spread the radio love

TX Factor Episode 20

(Source TX Factor)

Welcome to our 20th episode! In this revamped show we conclude our look at innovative amateur radio products from Hamfest 2017, and Bob goes back to basics with an overview of setting up an inexpensive SDR dongle.

We have two great prizes to give away in our free-to-enter draw. An RSP1A SDR receiver from SDRplay and a copy of the best-selling book ‘SDR’ from the RSGB. Plus we look back at the past four years of topics covered by the TX Factor team. We hope you enjoy it!
http://www.txfactor.co.uk

Click here to view Episode 20 on TX Factor’s website, or click here to watch on YouTube.

Thanks for yet another excellent and informative episode, TX Factor!

Spread the radio love

Ivan compares the AirSpy HF+ to the KiwiSDR

Many thanks to SWLing Post contributor, Ivan (NO2CW), who writes:

I have been running a public Kiwisdr server for a while and yesterday decided to plug in the new Airspy HF + into the same antenna for a side to side comparison. The antenna is an 80m dipole and the test was done during local afternoon, around 3 PM. I did not use any of the many new noise reduction features that are incorporated into both SDR Console 3 and the SDR web server. The 11 minute video is located here:

Click here to view on YouTube.

When I have the time I will run a similar test in nighttime conditions and also test the Airspy HF+ against a few other radios sitting on my desk.

Thank you for sharing this, Ivan!

Spread the radio love

Pete reports new developments with the uBITX transceiver

Many thanks to SWLing Post contributor, Pete Eaton (WB9FLW), who writes:

Last March, Ashhar Farhan (VU2ESE) the designer of the very popular BITX20 and BITX40 series of mono-band HF Transceivers announced a new low cost rig called the uBITX (micro BITX) a full blown 80-10m 10 Watt SSB/CW Transceiver. Now comes word that after many months of very hard development work by Ashhar this much anticipated Rig will soon be available.

For those not familiar with the project this is *not* a kit, rather like its sibling (the BITX40) it consists of two assembled and tested Circuit Boards. The RF board measures 5.5 x 6 inches and a second small plug in daughter card that takes care of the digital portion of the design including the 2X16 LCD, Arduino Nano, and Si5351 which are used in the VFO.

Add a cabinet, knobs, and connectors and you have a full blown HF Rig! An added plus is that except for the Gerber PCB files everything else (including the firmware) is Open Sourced!

The original description can be found here:

http://www.phonestack.com/farhan/ubitx/ubitx.html

Farhan has just released the Firmware, Schematics, and Wiring Diagram for the production version on GitHub

Arduino Sketch:

https://github.com/afarhan/ubitx

RF Board Schematic:

https://github.com/afarhan/ubitx/blob/e481ea2a2457fc4e7be7a6a4bc9a0fba12bf2cde/ubitxv3.pdf

Digital (Raduino) Board Schematic:

http://www.phonestack.com/farhan/ubitx/raduino.pdf

Wiring Diagram:

https://github.com/afarhan/ubitx/blob/e481ea2a2457fc4e7be7a6a4bc9a0fba12bf2cde/ubitx_wiring.png

Farhan has a social conscience as well giving several local ladies much needed employment for final assembly and checkout of the Rigs.

There are still a few final tweaks being done to the design so pricing is still to be determined. But if it’s offered at a similar price point as his earlier Transceivers it should sell like hotcakes!

For the latest info check out the BITX User Group at:

https://groups.io/g/BITX20

Wow!  Amazing project!  Thanks for the tip and updates, Pete!

Spread the radio love

Video: TX Factor Episode 19

(Source: TX Factor)

In this show we kick off with part one of our reports from Hamfest 2017 with a preview of the Icom IC-7610 and IC-R8600 rigs. We meet the new owners of PW Magazine, and Pete tries his hand at the RSGB on-line exam. There’s also an update on the RSGB’s EMC Committee’s findings.

Bob finds his way back to New Broadcasting House in London where the Director General discovers he has amateurs working for the BBC.

And, you can win a mobile linear-amp for your handie in our next free-to-enter draw.

Click here to view Episode 18 on TX Factor’s website, or click here to watch on YouTube.

Thanks for yet another excellent and informative episode, TX Factor!

Spread the radio love