Many thanks to SWLing Post contributor, 13dka, who shares the following guest post:

In search of benchmark signals: The International Beacon Project

by 13dka

If you – like yours truly – like to tinker with antennas and radios to get the most out of them, you likely have your own set of reference stations. If this is a new concept for you – reference stations are whatever stations you deem apt to check propagation, the general function of your radio, when trying to improve reception or comparing radios… They are ideally always on when you need them and come in various strengths and distances on several bands from all over the world. Traditional sources for that are of course time signals and VOLMET stations on HF, even though the latter are giving you only two 5-minute slots per hour for testing reception from a specific region and the former have their own specialities here in Europe:

A typical scene on 10 MHz, captured at home 30 minutes after the full hour: BPM voice ID from China mixed with something else, then Italcable Italy kicks in on top of some faint murmur possibly from Ft. Collins, in winter some South American time stations may stack up on that together with splatter from RWM 4 kHz lower…

A reliable source of grassroots weak signals is particularly desirable for me because I enjoy proving and comparing the practical performance of radios at “the dike”, a QRM-free place on the German North Sea coast. In the absence of manmade noise and the presence of an ocean adding 10dB of antenna gain, finding benchmark stations with “grassroots” signal levels turned out to be a different challenge than it used to be: With somewhat sizeable antennas the stations tend to be (too) loud there, even with the baseline ionospheric conditions under a spotless sun in its activity minimum. In short, my old benchmark stations didn’t work so well anymore and I had to find something new. Continue reading →