Tag Archives: eBay

One of the highest prices ever paid for a Collins 51J-4

Collins-51J4Many thanks to SWLing Post contributor, Dan Robinson, who writes:

Over $2k for this receiver, which appears to be quite unique. It is not one of the well-known and quite rare Beckman 51J4s, and likely it was re-finished to give it the almost white-grey color it has.

But it does have an interesting tuning addition, what the seller calls a factory-installed 4:1 vernier knob. Regardless, it fetched about as much as any 51J4 has ever brought in on Ebay:

http://www.ebay.com/itm/181975178674?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Thanks, Dan! That 51J4 is a beauty. I’m always amazed at the price Collins equipment fetches at auctions and even at Hamfests. You’re hard-pressed to find anything under $800 and rare units (like the 51J4 above) sell for so much more.

Someday, I’d like to add a Collins R-390A to my collection, but first I need to make room for it and start saving! My buddy, Charlie (W4MEC) has rebuilt several R-390s and I’ve no idea how he does it. The tuning mechanism alone is one amazing (and complicated) piece of engineering! Charlie loves a good challenge, though, and he’s certainly brought a few R-390s back into full service.

Spread the radio love

eBay find: the “mythical” Sony CRF-V21

Image source: Universal Radio

Image source: Universal Radio

Many thanks to SWLing Post contributor, Anil, who writes:

Here is a link to an Ebay auction for the mythical Sony CRF-V21. In all my years, I have never seen one for sale before and it might be interesting for some blog readers…

Click here to view on eBay.

Mythical is, indeed, the correct word for the Sony CRF-V21, Anil!

Check out our previous post that mentions the Sony CRF-V21.

Spread the radio love

eBay find: Mullard Meteor 600A

Mullard-Tube-Radio-Bakelite-1Many thanks to SWLing Post reader, Monti, who knows that I have a serious affinity for 1940s era receivers. Monti writes from his home in Australia:

I had to send you this link Thomas. I’ve never seen this model before but what a stunning shape for a 40’s piece.

Look at this on eBay:
Mullard Meteor 600A Vintage Art Deco Bakelite Valve Radio c.1947

Lovely! While I could never pay $485.00 AUD for a non-working radio, I can certainly appreciate this gorgeous and unique design with radiating speaker grill louvres.

Check out this beautiful “meteor” dial:

Mullard-Tube-Radio-Bakelite-2

What a stunning radio!

Here are a few more pics I snatched from the eBay listing:

Mullard-Tube-Radio-Bakelite-3Mullard-Tube-Radio-Bakelite-5

Mullard-Tube-Radio-Bakelite-4

Mullard-Tube-Radio-Bakelite-6

Thanks for sharing, Monti!

Any lucky SWLing Post readers in Australia or New Zealand own one of these Mullards?

Spread the radio love

Michael comments on the Squires Sanders SS-IBS

s-l1600

Regarding the Squires Sanders SS-IBS Dan recently spotted on eBay, SWLing Post reader, Michael Black comments:

[The Squires Sanders SS-IBS is] a legendary receiver that either brought new ideas to receivers, or brought them to the amateur radio level.

There’s an article in QST in 1963 from Squires about this new stuff, I’ve never seen it so I don’t know if he’s talking in abstract terms, or revealing this receiver.

A big difference is that there’s no RF amplifier before the mixer, and the mixer is balanced. But he throws some of that out by going to double conversion, I assume for tuning reasons. The first IF is 500KHz wide, the first oscillator is crystal controlled and the second oscillator is variable, as seen in top end receivers of the day. The alternative would be a tuneable oscillator that was switched per band (instability from the switch, and the higher the band, the higher the frequency, hence stability) or mixing the tuneable oscillator with a crystal oscillator before feeding the first mixer, which can cause spurs without proper filtering).

The second IF is 1MHz, and having a filter so high was relatively new, though maybe some rigs had moved up to HF filters at the time.

It apparently is fussy about the antenna, or matching, because of the lack of RF amplifier.

Soon there’d be receivers that converted to 9MHz or so directly, saying goodbye to most image problems. Heathkit had a general coverage receiver later in the sixties that had an IF, with crystal filter, at 1680KHz, a relatively cheap receiver with much greater image rejection on the higher bands. The ham band only Heathkit HR-10 used the same IF and filter.

The Heathkit HR-10 (Source: Heathkit Virtual Museum)

The Heathkit HR-10 (Source: Heathkit Virtual Museum)

Then a bit later, synthesizers arrived that made it much easier to build better receivers.

There was a wave of building using the 7360 balanced mixer used in this receiver, and frontend q-multipliers to deal with the lack of front end selectivity. But as semiconductors and ICs came along, it became much easier for mixers to be balanced or double balanced.

Thanks for this insight, Michael–sounds like the Squires Sanders SS-IBS was quite the innovation of its time. Thank you for sharing!

Spread the radio love

Dan spots a Squires Sanders SS-IBS on eBay

s-l1600

SWLing Post contributor, Dan Robinson, notes the following eBay link via the Extreme Shortwave Listening Facebook group:

“One of the rarest receivers, first one seen in years….famously pictured in the shack of the late Richard E. Wood from the 1970s… the Squires Sanders SS-IBS.”

Click here to view the Squires Sanders SS-1BS on eBay.

What a beautiful radio! I don’t think I’ve ever seen one int he wild. I’m pretty sure it’ll soar in price once the bidding truly starts.

Spread the radio love

eBay find: American Electrola DXC-100

DXC-100

Last night, I noticed an untested American Electrola DXC-100 shortwave/AM/FM radio listed on eBay: it had a BuyItNow price of $49 shipped.

The seller (who has an excellent feedback history) disclosed that the power supply was missing, thus the receiver couldn’t be tested.

s-l1600

As you can see from the photos, it’s in great cosmetic shape.

I’ll admit it: I purchased the DXC-100 in a moment of weakness this morning. I don’t expect it to be much of a performer, but it is a relatively rare 1990s receiver that was built in Pittsburgh, PA. I believe only 2,000 units were produced. I have a weakness for odd-ball receivers.

I’m willing to bet the DXC-100 is functional, though the backup battery may need to be replaced.

s-l1600 (1)

Does anyone have a schematic or owner’s manual for the DXC-100? I will have to find or build a suitable 9V power supply but need to determine the proper polarity first.

I’ll do a short review of the DXC-100 if I’m able to get it on the air.

Spread the radio love

Andi provides detailed info and photos of the new Degen DE1103 DSP

de1103-dsp

Regarding the new DSP version of the Degen DE1103, SWLing Post contributor, Andi_84, writes:

I’ve opened [my Degen DE1103] and checked the semiconductors inside.

It’s definitely based on a Silicon Labs chip (Si4735-D60).

1) Display PCB
Valence Tech AP651 “LCD AND KEYBOARD CONTROLLER”: http://www.valencetech.com/products.php?prodID=ap651&type=ics
Datasheet: http://www.valencetech.com/doc/AP651/DS_AP651-Rev0.1.02.pdf

2) Main PCB

a) Silicon Labs Si4735-D60 “AM/FM/SW/LW Radio Receiver IC”: http://www.silabs.com/products/audio/fm-am-receiver/Pages/si473435.aspx
-> Chip is even capable of RDS, but it’s unfortunately not implemented in the DE1103
And, FM range covers down to 64MHz, while the DE1103 goes only down to 76MHz
Datasheet: https://www.silabs.com/Support%20Documents/TechnicalDocs/Si4730-31-34-35-D60.pdf

b) ST Micro STM8L152C6T6 “Ultra-low-power 8-bit MCU with 32 Kbytes Flash, 16 MHz CPU, integrated EEPROM”
Datasheet: http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00240181.pdf

c) China Hua Jing Electronics CD1622CB “110mw X 2 Dual-channel audio power amplifier”
-> Looks like a “chinese version” of the Sony CXA1622M
Datasheet: http://www.datasheet.hk/view_download.php?id=1039877&file=0024%5Ccd1622cb_203207.pdf

d) LM358 “Low-Power, Dual-Operational Amplifiers”
Datasheet: http://www.ti.com/lit/ds/symlink/lm158-n.pdf

Photos

The following photos are courtesy of Andi_84. Please click the image to enlarge.

External and unboxing

WP_20151111_007 WP_20151111_006 WP_20151111_004 WP_20151111_003 WP_20151111_002 WP_20151111_001 WP_20151111_020 WP_20151111_019 WP_20151111_018 WP_20151111_014 WP_20151111_012 WP_20151111_009 WP_20151111_008 WP_20151111_027 WP_20151111_025 WP_20151111_024 WP_20151111_023 WP_20151111_022 WP_20151111_021
Internal and circuit board

WP_20151114_033 WP_20151114_034 WP_20151114_035 WP_20151114_036 WP_20151114_026 WP_20151114_027 WP_20151114_029 WP_20151114_030 WP_20151114_031 WP_20151114_014 WP_20151114_015 WP_20151114_016 WP_20151114_018 WP_20151114_019 WP_20151114_020 WP_20151114_024 WP_20151114_003 WP_20151114_005 WP_20151114_006 WP_20151114_011 WP_20151114_012 WP_20151114_013 WP_20151114_002
Many thanks, Andi!  These photos are excellent and certainly give us more insight into the new Degen DE1103 design.

I’m very curious how this new DE1103 compares with other DSP portables on the market.

Spread the radio love