Tag Archives: Radio Frequency Interference

Can’t receive anything on your new shortwave radio–? Read this.

This morning, I received a question from Andrew, an SWLing Post reader in the UK.  Andrew writes:

May I ask a question please? I am very much a newbie to this. I am not really interested in FM, but I would like to listen to international stations on SW, utilities stations, amateur broadcasts and if possible, local airports, aircraft on air band.

I have just purchased a Tecsun PL-680 and have tried it inside my home with the telescopic and wire aerial that came with it, plugged into the antenna port and clipped to a point near the ceiling. All inside the house and the wire aerial did improve the reception, but I get hardly and channels either during the day or night.

Grateful for your detailed advice on what I need to do exactly to improve the number of stations I can receive.

Kind regards
Andrew

Thank you for your question, Andrew, and I hope you don’t mind that I share it here on the SWLing Post as I receive this question so frequently from new shortwave radio enthusiasts.

Of course, a number of things could be affecting your shortwave radio reception and there is, of course, the possibility the receiver is faulty–however, this is very unlikely. Let’s talk about what is most likely the culprit:

Radio Frequency Interference (RFI)

RFI is quite often the elephant in the listening room. It’s not always immediately obvious–especially if you’re new to shortwave listening.

RFI (also known as QRM) is radio noise that is created locally and often concentrated in our homes and neighborhoods. RFI deafens our shortwave radios by overwhelming the receiver with strong spurious signals. Even if you can’t hear the noise, it could still be overwhelming your receiver from a different portion of the band.

RFI can emanate from most any modern electronic or digital device in your home: televisions, power supplies, dimmer switches, smart appliances, and even computer hard drives. Honestly, most any device could be the culprit.

These “Wall Wart” type adapters can create a lot of RFI

RFI can also be caused by power line noises outdoors which have a much larger noise footprint and typically require intervention from your local utilities company/municipality.

In all likelihood, though, it’s a noise inside your home.

There’s a quick way to determine if RFI is the culprit:

Take your radio outdoors, away from the noise

Depending on where you live, this might only require walking with your radio to the far end of your garden/yard, or it might require hopping in your car and visiting a local park. The idea is to find a spot far removed from houses and buildings, outdoor lighting, and even power lines if possible.

Once you find a listening spot, turn on your portable and tune through some of the popular shortwave radio bands.

If in the late afternoon or evening, I like tuning through either the 31 meter band (9,400–9,900 kHz), 41 meter band (7,200–7,450 kHz) and, if late evening, the 49 meter band (5,900–6,200 kHz). Jot down the frequencies where you hear stations and perhaps even make notes about the signal strength. Then go back home and see if you can receive as many stations. Shortwave stations change frequencies often, but if you listen from home at the same time the following evening, the radio landscape should be similar.

My guess is that you’ll hear many more stations in the field than you can from within your home.

Living with RFI

Sadly, RFI is just a fact of life in this century. It’s very hard to escape, especially for those of us living in dense urban areas. This is one of the reasons I’m such a big fan of taking radios to the field.

There are things you can do to improve reception and I would encourage you to read through this post from our archives (the first two points in the article directly address RFI). Do your best to track down sources of noise and eliminate them.

If you find that, even in the field, your shortwave receiver can’t receive stations with the antenna fully extended, then it may indeed be an issue with the radio itself and you might need to send it back to the manufacturer or retailer if it’s within the return window.

Post readers: If you have other suggestions, feel free to comment!


Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Take the field and abandon the radio noise!

The most common complaint I hear from new SWLing Post readers is that they can’t hear stations from home on their receivers and transceivers. Nine times out of ten, it’s because their home environment is inundated with man-made electrical noises often referred to as QRM or RFI (radio frequency interference).

RFI can be debilitating. It doesn’t matter if you have a $20 portable radio or a $10,000 benchmark transceiver, noise will undermine both.

What can you do about it?

Since we like to play radio at home, we must find ways to mitigate it. A popular option is employing a good magnetic loop receive antenna (check out this article). Some readers find noise-cancelling DSP products (like those of bhi) helpful when paired with an appropriate antenna.

But the easiest way to deal with noise is to leave it behind.

Take your radio to a spot where man-made noises aren’t an issue.

Field radio

If you’ve been reading the SWLing Post for long, you’ll know how big of a fan I am of taking radios to the field–both transceivers and receivers. Not only do I love the great outdoors, but it’s the most effective way to leave RFI in the dust.

Sunday was a case in point (hence this post).

Let’s be clear: I blame Hazel…

Last week, I did a Parks on the Air (POTA) activation of Hampton Creek Cove State Natural Wildlife Area in Tennessee. It’s a beautiful area with a fantastic hiking trail (the Overmountain Victory Trail) in a relatively remote/rural area.

About 5 minutes before Hazel’s cow patty fun.

My family had a great time at the site–we enjoyed a picnic and I played radio–but Hazel (our trusty canine companion) decided to roll in a cow patty during our hike. Hazel thought it smelled wonderful. Her family? Much less so. And all five of us were staring at a two hour car ride together.

Fortunately, my wife had a bottle of bio-degradable soap we use while camping, so I washed Hazel in Hampton Creek. (Turns out, Hazel didn’t mind that nearly as much as getting washed at home in the tub.)

In all of the commotion I forgot to take my EFT Trail-Friendly antenna out of the tree. Doh!

The EFT Trail-Friendly antenna is incredibly compact and quite easy to deploy.

The EFT is my favorite field antenna for POTA activations. It works so well and is resonant on 40, 20 and 10 meters. With an ATU, I can also tune any bands in between. I’ve deployed this antenna at least 130 times in the field and it was still holding up.

I was bummed. Hampton Creek is nearly a four hour round-trip from my home. Was it worth the trip to rescue my antenna?

Fast-forward to Sunday: my amazing wife actually suggested we go back to Hampton Creek Cove on Sunday and also check out nearby Roan Mountain State Park. Would my antenna still be in the tree? Hopefully.

Whew! Still hanging out!

Fortunately, my antenna was still hanging there in the tree as I left it the week before. I was a little concerned the BNC end of the antenna may have gotten wet, but it was okay.

Mercy, mercy, so little noise…

I turned on my Elecraft KX2 and plugged in the antenna. Oddly, there was very little increase in the noise level after plugging in the antenna. That worried me–perhaps the antenna got wet after all? I visually inspected the antenna, then pressed the “tune” button on the KX2 and got a 1.4:1 SWR reading. Then I tuned around the 40 meter band and heard numerous loud stations.

What was so surprising was how quiet the band was that day (this time of year the 40M band is plagued with static crashes from thunderstorms).

Also, there were no man-made electrical noises to be heard.  This allowed my receiver to actually do its job. It was such a pleasure to operate Sunday–no listening fatigue at all. Later on, we set up at Roan Mountain State Park and did an activation there as well. Again, without any semblance of RFI.

When I’m in the field with conditions like this, I always tune around and listen to HF broadcast stations for a bit as well. It’s amazing how well weak signals pop out when the noise floor is so incredibly low.

It takes ten or so minutes to set up my POTA station in the field, but if you have a portable shortwave radio, it takes no time at all. None. Just extend the telescoping antenna and turn on the radio.

Or in the case of the Panny RF-2200 use its steerable ferrite bar antenna!

If you’re battling radio interference at home, I would encourage you to survey your local area and find a noise-free spot to play radio. It could be a park, or it could be a parking lot. It could even be a corner of your property. Simply take a portable radio outside and roam around until you find a peaceful spot with low-noise conditions. It’s the most cost-effective way to fight RFI!

Post readers: Do you have a favorite field radio spot? Do you have a favorite field radio? Please comment!

Also, check out these articles:

Spread the radio love

Secure federal facility interfering with garage door openers?

Many thanks to SWLing Post contributor, Jakon Hays, who shares a link to the following article at Inside NOVA:

A top-secret and secure federal government facility just northwest of Warrenton admitted this week it may be responsible for crippling dozens of garage door openers in two nearby subdivisions, FauquierNow.com’s Don Del Ross writes.

More than 70 Olde Gold Cup and Silver Cup Estates homeowners have reported that openers started to fail about two weeks ago, according to Betty Compton, Olde Gold Cup’s Neighborhood Watch group coordinator.

Warrenton Training Center B, a classified federal facility, issued a statement this week saying its radios may be to blame.[…]

Click here to read the full article.

This is interesting. I’ve heard this is a very common complaint in/around large broadcast facilities. Whether or not it’s always true is up for debate, but I should think it would be easy to test the RF environment in the area and confirm.

Spread the radio love

Arcing can produce nasty broadband radio interference

On this trip to Québec, indoor listening has been more productive than listening from our balcony.

I mentioned in a previous post that, this year, QRM levels here at the condo in Québec are higher on our balcony than they are inside the building.

I think I found the source.

A couple weeks ago, on my morning walk, I passed underneath some high voltage power lines about 1 km from the condo. I noticed the sound of arcing coming from a pole nearby. No doubt, something metal–a staple, a cable, a pin, etc.–is the culprit.

I pulled out my smart phone and made this short video. If you turn up the volume, you might hear the noise especially at the end of the clip.:

I took a portable radio back to the site later and heard the same broadband noise I heard from the condo.

Although we only rent this condo a couple months a year, I’ll try to report the noise to the Hydro Québec. I know that our utility company in the States must follow up with requests like this and do their best to eliminate unintentional sources of RFI. These issues can also be an indication of something in the system failing, so power companies can actually be quite grateful for the feedback.

If you have persistent broadband noise at home, check out some of the trouble shooting tutorials at K3RFI’s website for a little guidance.

Despite all of this noise, I’m pleased I can still receive a few of my favorite shortwave stations. And, of course, escape to the KiwiSDR network and hit the field from time to time!

No worries, though, I’ll be back at my home station soon and can once again enjoy a relatively RFI-free radio space!

Post readers: Have you ever been plagued with power line noise? What did you do about it? Any tips? Please comment!

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Can’t escape the noise? Take an impromptu DXpedition via the KiwiSDR network!

While I love the Panasonic RF-B65, the Voice of Greece and a St. Ambroise Oatmeal Stout: this combo can’t fight the persistent radio interference here at the condo.

Some of you might recall that I’m spending the months of August and September in a condo near Québec City, Canada. We love it here, though it does present some radio challenges. Unlike our rural/remote mountain home in the States, I’ve always had to cope with QRM (manmade radio interference) here at the condo. Not surprising.

I typically bring my PK Loop antenna–it helps lower the noise a tad and is easy to take out on our balcony for optimal reception. Lately, though, the QRM has been even worse on the balcony than inside the condo (more on that in a future post).

Some North American and European stations punch through the noise when propagation is favorable (especially the Voice of Greece and Radio Romania International) but there have been evenings where nothing could penetrate the wall of noise.

One way I escape the noise, of course, is to take my radio to a picturesque remote location for the afternoon or evening. It’s amazing the number of signals you can pull out of the ether when the noise floor is so low.

Back at the condo, though, there’s no easy way to escape the noise.

Or is there?

Impromptu DXpeditions

Perhaps 21st century problems require 21st century solutions.

This year–especially here at the condo–I’ve spent a great deal of time exploring the KiwiSDR network.

For those of you not familiar, the KiwiSDR is a self-hosted WebSDR which operates much like a mini U Twente WebSDR. KiwiSDR owners install their SDRs at home–or in other favorable locations–then share control of their SDR with the world via the the Internet.

Like the U Twente WebSDR, KiwiSDRs allow multiple simultaneous users to control the SDR independently of each other. Each KiwiSDR can allow up to four simultaneous guests (the U Twente WebSDR can allow hundreds of simultaneous users, but it’s also a university-supported bespoke SDR with fantastic bandwidth!).

Over the past few years, the KiwiSDR network has grown almost exponentially. There are Kiwi SDRs on every continent save Antarctica (someone remedy that, please!).

Each red pin represents a KiwiSDR installation.

Other than the fact that the SDR audio is piped through the Internet–and you can’t walk outside and adjust the antenna–there is no difference between using a KiwiSDR remotely or locally.

In fact, the KiwiSDR only has a web browser-based application, there is no downloadable application for local use. So quite literally, the experience of controlling and using a KiwiSDR locally or globally is identical.

And it’s so much fun! I browse the KiwiSDR network via the map above, select an interesting location, and virtually travel there for an impromptu DXpedition. I can travel to India, Italy, Japan, New Zealand, or Hawaii via the network and be back in time for dinner here in Canada without breaking a sweat or even using frequent flyer miles!

I’ve found that the combo above makes for an immersive experience. I use Bose Quiet Comfort noise-cancelling headphones paired with my iPad Air (which I have enclosed in a Zagg Rugged Book). With a reasonable Internet connection, it truly feels like I’m there.

Of course, you don’t need an iPad, or any special equipment. The KiwiSDR application works with pretty much any computer, tablet or smart phone that has a web browser. For the best experience, however, I would suggest connecting a good external speaker, bluetooth speaker or headphones.

I know many of you are thinking, “But Thomas! This isn’t real radio!”

But I would argue that it is real radio! It’s a real radio, connected to a real antenna that you’re simply controlling via the Internet with a web-based SDR application. Instead of the audio going through a sound card into your headphones, it’s going into a soundcard, piped through the Internet, then into your headphones.

Give it a try! You might find an impromptu DXpedition is the perfect remedy to your QRM and RFI blues!

Post readers: Any heavy KiwiSDR users out there?  Or do you oppose using WebSDRs? What are your thoughts? Please comment!

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

DARC’s initiative to track the state of radio interference

Many thanks to SWLing Post contributor, Alexender (DL4NO), who shares the following comment in response to our recent post about LED bulb QRM:

The DARC does even more: It is planning a long-term project with some 50 automatic monitoring stations with standardized, calibrated antennas and according to standardized methods to document the changes.

Every monitoring station will scan the bands for free frequencies and measure the background noise there. Every 15 min it will send its findings to a central database where the data will be collected and evaluated.

This way the DARC wants to document the ever increasing interferences in a way that is valid according to the relevant standards. Most monitoring stations are planned to be placed at fixed locations all over Germany. But a few are planned to be placed for a limited time in especially interesting locations.

Presently relevant findings are collected. If you live in Germany see https://www.darc.de/der-club/referate/emv/emv-abhilfemassnahmen/. Also see the DARC magazine cqDL 12-2017, p. 15.

To emphasize it again: Informal reports to your radio club are good. But if you wish to communicate with the legislative bodies you must do your measurements according to the standardized rules using calibrated equipment. Otherwise the authorities will not accept your findings.

See:
https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.372-13-201609-I!!PDF-E.pdf
https://www.itu.int/dms_pubrec/itu-r/rec/bs/R-REC-BS.560-4-199710-I!!PDF-E.pdf

Most impressive, Alexander! I love the fact that DARC is using objective observations to support their initiative. The concept is a fascinating one that I should hope other national radio clubs could copy. I will certainly send this to the ARRL.

Thanks again, Alexander!

Spread the radio love

DARC asks that you send RF polluting LED bulbs to Elektor Magazine

Photo By Trung Pham Quoc

(Source: Southgate ARC via Mike Hansgen)

LED Bulb RF Pollution – Elektor Magazine investigates

DARC, the German national amateur radio society, are requesting amateurs to send LED bulbs which pollute the RF spectrum to the magazine Elektor for investigation

A Google English translation reads:

Elektor-Verlag GmbH calls all readers and especially all radio amateurs to send non-compliant LED bulbs including power supplies. Elektor wants to investigate this EMC-technical and then forward it to the competent market surveillance of the BNetzA.

The reason for the action: As a result of a press release of the DARC in September 2017 on the significantly increasing interference of radio communications, other radio services and the DAB reception by non-EMC compliant LED bulbs Elektor had investigated such lamps (as well as LED strips). The result showed a progressive electromagnetic pollution.

The Federal Network Agency as competent authority for market surveillance in accordance with the EMVG has welcomed the call for the submission of suspicious copies. In addition, the Federal Agency would like to be informed if disturbing lamps attract attention. She then wants to investigate this situation and take the products out of the market, if they are still offered.

Please send suspicious copies

Elektor-Verlag GmbH
Kackertstr. 10
52072 Aachen

Please enclose a note with the words “EMC LED lamp” so that everything runs correctly in the inbox. You can also announce your submission via e-mail to [email protected] with the subject “EMC-LED-Lamp”. Elektor Verlag GmbH then checks the lamp, publishes an update if necessary and informs the Federal Network Agency.

Here the link to the Elektor article from 23.04.2018
https://www.elektormagazine.de/news/bundesnetzagentur-zu-schicken-sie-uns-verdachtige-led-lampen

Source DARC http://darc.de/

2017 RF pollution from LED bulbs in Elektor Magazine
http://www.southgatearc.org/news/2017/september/rf-pollution-from-led-bulbs-in-elektor-magazine.htm

Spread the radio love