Category Archives: Ham Radio

A Panasonic RF-2200 in “The Walking Dead”

Panasonic RF-2200

Many thanks to SWLing Post contributor, Balázs, who adds the following note to his recent radio sighting (of a Hallicrafters HT-32 Transmitter) in the series “The Walking Dead.

Balázs notes that in the season nine finale, he spotted the previously mentioned HT-32 (see image below), in addition to the iconic Panasonic RF-2200 (see image above).

Hallicrafters HT-32 Transmitter

Honestly, I think both of these radios would serve you well in a post-apocalyptic world!

Turns out, The Walking Dead is filmed in Senoia, and Fayetteville, Georgia, USA and SWLing Post contributor, Steve Yothment, lives nearby. As the then president of his radio club, he was consulted last year about radio gear to use on The Walking Dead set. He tells us to look out for an HF amplifier and field strength meter in future episodes! How cool is that?!

I’ll add this post to our ever growing archive of radios in film!

Spread the radio love

HF military communication exercise announcements on WWV/WWVH

(Source: ARRL News via Eric WD8RIF)

The US Department of Defense (DOD) plans to start making use of a provisional time slot on WWV and WWVH to announce upcoming HF military communication exercises and how the Amateur Radio community can become involved in them. The announcements will occur at 10 minutes past on WWV and at 50 minutes past on WWVH. WWV and WWVH transmit on 2.5, 5, 10, 15, and 20 MHz.

“DOD’s use of the broadcast time slot on WWV/WWVH will benefit the MARS program’s mission of outreach to the Amateur Radio community,” said US Army Military Auxiliary Radio System (MARS) Program Manager Paul English, WD8DBY. “The actual messages to be broadcast are coordinated by the DOD Headquarters that the MARS program supports.”

The initial announcements are set for the period April 20 – May 3, which coincides with the “Vital Connection” interoperability exercise to be held in Wisconsin. Future time slots will coincide with the Vital Connection exercise Ohio in June; DOD COMEX 19-3 in August, and the DOD COMEX 19-4 in October. Following the proof of concept this year, DOD anticipates making use of the WWV/WWVH broadcast time slot full time, year-round.[…]

Click here to read the full article via the ARRL News.

Spread the radio love

MagPi Issue 80 features Ham Radio Projects for the Raspberry Pi mini computer

Thanks to a hat tip from the Southgate ARC, I discovered that the excellent MagPi magazine has featured a number of ham radio projects in this month.

I’ve outlined below a list of the projects with page numbers–note that many are simply summaries that link to full project notes in previous editions:

  • Page 52: Pictures from space via ham radio
  • Page 71: ADS-B flight tracker (we also have a short tutorial here)
  • Page 72: WSPR transmitter
  • Page 73: Remote SDR scanner
  • Page 74: Digital voice hotspot
  • Page 75: Satellite tracking
  • Page 75: APRS IGate

Issue 80 of MagPi is free (click here to download as a PDF). You can also pay for a print subscription via post as well.

I highly recommend downloading each issue of MagPi–it’s a brilliant, informative magazine and is chock-full of projects and ideas for Pi fans of any age.

One of my Raspberry Pi 3Bs in service.

I’m a big fan of the Raspberry Pi and use it for a number of applications. This issue has encouraged me to give WSPR a go and perhaps even build a DV hotspot in the near future.

Raspberry Pi kits are quite affordable–Amazon has a massive selection from bare-bones units to full packages which include everything you need to get started. I’m a fan of both Canakits and Vilros.

Click here to search Amazon.com (this affiliate link also supports the SWLing Post).

I also purchase Pi systems, accessories, and hats from AdaFruit.

Post Readers: Are you a fan of the Raspberry Pi or other mini computers? Please comment and share your projects/ideas!

Spread the radio love

Canada: Individual causing malicious interference triggers parliament petition

(Source: Radio Amateurs of Canada via Bruce Atchison)

*/For immediate release:/*

https://wp.rac.ca/ised-canada-responds-to-petition-about-interference/

On June 6, 2018, Martin Bérubé of Louiseville, Quebec initiated a petition involving a radio station that was “generating interference on purpose”. The petition attracted 1,135 signatures and was presented to the House of Commons on January 30, 2019.

The Government of Canada tabled the following response on March 18, 2019.

“Innovation, Science and Economic Development Canada <http://www.ic.gc.ca/eic/site/icgc.nsf/eng/home> (ISED) was informed of the individual’s conduct in December 2015 by a group of Amateur Radio operators from Quebec. The individual was operating an Amateur Radio station without proper authorization and was known to insult, threaten and impersonate other Amateur operators.

As the individual disregarded ISED’s written and verbal warnings, the department took action to enforce the /Act/. Due to repeated offences, ISED carried out three searches of the individual’s residences and issued seven notices of violation totalling $2,500 plus fees.

On October 17, 2018, the individual was found guilty of these seven violations of subsection 4(1) of the /Radiocommunication Act/, pursuant to subsection 10(1) of the /Act/, by Justice of the Peace Annie Vanasse at the Trois-Rivières Courthouse.

ISED also called upon a federal prosecutor to obtain an injunction against the individual. This injunction is currently at the interlocutory stage. ISED understands that the individual has not been heard on Amateur Radio since August 8, 2018. ISED is closely following this case.”

The text of the petition and the Government Response can be found at the following link:

https://petitions.ourcommons.ca/en/Petition/Details?Petition=e-1631

*Alan Griffin
RAC MarCom Director*

Spread the radio love

FCC invites comments on ARRL Technician Enhancement proposal

(Source: Southgate ARC)

The FCC has invited public comments on ARRL’s 2018 Petition for Rule Making, now designated as RM-11828, which asks the FCC to expand HF privileges for Technician licensees to include limited phone privileges on 75, 40, and 15 meters, plus RTTY and digital mode privileges on 80, 40, 15, and 10 meters.

Interested parties have 30 days to comment. The Technician enhancement proposals stemmed from the recommendations of the ARRL Board of Directors’ Entry-Level License Committee, which explored various initiatives and gauged member opinions in 2016 and 2017.

“This action will enhance the available license operating privileges in what has become the principal entry-level license class in the Amateur Service,” ARRL said in its Petition. “It will attract more newcomers to Amateur Radio, it will result in increased retention of licensees who hold Technician Class licenses, and it will provide an improved incentive for entry-level licensees to increase technical self-training and pursue higher license class achievement and development of communications skills.”

Specifically, ARRL proposes to provide Technician licensees – both present and future – with:
* Phone privileges at 3.900 to 4.000 MHz, 7.225 to 7.300 MHz, and 21.350 to 21.450 MHz.
* RTTY and digital privileges in current Technician allocations on 80, 40, 15, and 10 meters.

The ARRL petition points out the explosion in popularity of various digital modes over the past 2 decades. Under the ARRL plan, the maximum HF power level for Technician operators would remain at 200 W PEP. The few remaining Novice licensees would gain no new privileges under ARRL’s proposal.

ARRL’s petition points to the need for compelling incentives not only to become a radio amateur in the first place, but then to upgrade and further develop skills. Demographic and technological changes call for a “periodic rebalancing” between those two objectives, ARRL maintained in his proposal. The FCC has not assessed entry-level operating privileges since 2005.

The Entry-Level License Committee offered very specific data- and survey-supported findings about growth in Amateur Radio and its place in the advanced technological demographic, which includes individuals younger than 30. It received significant input from ARRL members via more than 8,000 survey responses. “The Committee’s analysis noted that today, Amateur Radio exists among many more modes of communication than it did half a century ago, or even 20 years ago,” ARRL said in its petition.

Now numbering some 384,500, Technician licensees comprise more than half of the US Amateur Radio population. ARRL stressed in its petition the urgency of making the license more attractive to newcomers, in part to improve upon Science, Technology, Engineering, and Mathematics (STEM) education, “that inescapably accompanies a healthy, growing Amateur Radio Service.”

ARRL said its proposal is critical to develop improved operating skills, increasing emergency preparedness participation, improving technical self-training, and boosting overall growth in the Amateur Service, which has remained nearly inert at about 1% per year.

The Entry-Level License Committee determined that the current Technician class question pool already covers far more material than necessary for an entry-level exam to validate expanded privileges.

ARRL told the FCC that it would continue to refine examination preparation and training materials aimed at STEM topics, increase outreach and recruitment, work with Amateur Radio clubs, and encourage educational institutions to utilize Amateur Radio in STEM and other experiential learning programs.

How to file your comment

(Source: ARRL)

Those interested posting brief comments on the ARRL Technician Enhancement proposal (RM-11828) using the Electronic Comment Filing System (ECFS) should access FCC Electronic Comment Filing System Express. In the “Proceeding(s)” field, enter the number of the PRM, i.e., RM-11828 (using this format), complete all required fields, and enter comments in the box provided. You may review your post before filing. All information you provide, including name and address, will be publicly available once you post your comment(s). For more information, visit “How to Comment on FCC Proceedings.”

Spread the radio love

CNN Travel features the abandoned Duga Radar site near Chernobyl

(Source: CNN Travel via Heath Hall)

(CNN) — The peaceful untouched forest north of Ukraine’s capital, Kiev, is a perfect spot to enjoy the outdoors — save for one fact.

It contains the radiation-contaminated Chernobyl Exclusion Zone, established in 1986 after the world’s worst nuclear disaster sent a wave of radiation fallout across Europe.

Since 2011 it’s been a major draw for adventurous tourists, but the forests here conceal another legacy of the Cold War, with a far more sinister and mysterious reputation.

The Duga radar.

Though once a closely guarded secret, this immense structure can be seen for miles around, rearing up through the mist over the horizon — a surreal sight.

From a distance, it appears to be a gigantic wall. On close inspection, it’s an enormous, dilapidated structure made up of hundreds of huge antennas and turbines.

The Duga radar (which translates as “The Arc”) was once one of the most powerful military facilities in the Soviet Union’s communist empire.

It still stands a towering 150 meters (492 feet) high and stretches almost 700 meters in length. But, left to rot in the radioactive winds of Chernobyl, it’s now in a sad state of industrial decay.

Anyone exploring the undergrowth at its feet will stumble upon neglected vehicles, steel barrels, broken electronic devices and metallic rubbish, the remainders of the hasty evacuation shortly after the nuclear disaster.[…]

Click here to continue reading the full article and explore the photo gallery at CNN Travel.

Spread the radio love

TC notes differences between Kenwood TH-D74 and TH-F6A on MW/SW

Many thanks to SWLing Post contributor, TC, who shares the following response to Ivan’s post about the Kenwood TH-D74 on mediumwave:

A couple of years ago, I published a side-by-side comparison of the TH-F6A and the TH-D74 on YouTube comparing reception of a local AM broadcast station. The F6A was far more sensitive on the AM broadcast band than the TH-D74.

You can see the video here:

Click here to view on YouTube.

I didn’t take the internal orientation of the bars into account, but the D74 is less sensitive in pretty much any orientation compared to the older F6A.

I contacted Kenwood about the difference, and they stated something to the effect of while the TH-D74 does receive MW, it wasn’t necessarily designed for it, and thus the reception there suffers compared to the F6A.

However, the tradeoff here seems to be better shortwave reception in the TH-D74 compared to the F6A. Hook the D74 up to a large wire antenna and you can easily pull in stuff on the shortwave broadcast and ham bands, and the IF filters help quite a bit as well.

Thanks for sharing, TC! I own a few wideband handheld transceivers so I keep a short SMA “pigtail” in my EDC pack that I can use to enhance HF performance. I simply clip a 15′ wire onto the pigtail’s  exposed conductor to enhance HF performance. Also, as Ivan points out, inductively pairing any of these tiny radios with a mag loop antenna will also augment performance on mediumwave.

Thanks again for sharing!

Spread the radio love