Tag Archives: VHF

CQ Satellite: ARISS FM Repeater, Ham Sats, Tracking, Antennas, and Looking At The Future

Many thanks to SWLing Post contributor, Dan Van Hoy (VR2HF), who shares the following guest post:


ARISS FM Repeater May Be Back on Early December and a Short Ham Satellite Summary

by Dan Van Hoy (VR2HF)

I’ve recently had a lot of fun learning about the current batch of ham satellites and operating through some of them for the past several months with only a Diamond discone (and a short run of RG-213 double-shielded coax), Yaesu FT-817 (for SSB/CW) and TYT TH-9800 for FM satellites (more power, Scotty!). This simple set-up has yielded hours and hours of great fun. The last time I did satellite work was in the ’70s making contacts from my car through Oscar 6. If I had a car here in Hong Kong I might try it again!

Here’s my living room TV tray and sofa shortwave and satellite station (no XYL in house at the moment).

ARISS FM Repeater

One of the recent highlights for both newcomers to satellite operations and old-timers was working the International Space Station’s (ISS) new FM repeater which came on the air in early September. It is a specially modified Kenwood D710-GA VHF/UHF transceiver. Unfortunately, it was only operational for about a month. For the past several weeks it has been used mostly in APRS mode.

The ARISS FM repeater runs five watts and sounds just like a regular terrestrial repeater in many ways. You can work it with any dual-band VHF/UHF FM rig and the right antenna. Full-duplex is not required, but it helps. Lower power requires some kind of gain antenna, but receiving can be done with simple antennas.

The ARISS organization just updated the schedule for the ARISS operation with this announcement:

“Next mode change (cross band repeater) targeting early December.”

YEAH! What a nice Christmas present!

Here’s a link to the full ARISS information page:

https://www.ariss.org/current-status-of-iss-stations.html

ARISS QSO with E21EJC

Here’s a Youtube video of one of my ARISS contacts with E21EJC. It was right after he came back from his DXpedition hauling microwave gear and dishes out to the Thai countryside to work the QO-100 geosynchronous satellite. I tell him “welcome home and have a good rest.” Kob really is “Mr Satellite!” He has posted hundreds of Youtube videos of satellite contacts.

In addition, here is video of their HS0AJ/P special “portable” station antennas for QO-100. 10 GHz RX dish (downlink) and 2.4 GHz TX dish (the big one). I listened to Kob and his friend make several QSOs via the QO-100 WebSDR:

Amazing the things we hams do just to spray some RF in the right direction!

Beyond the ARISS: A Ham Satellite Summary

Presently, AO-91 is probably the most popular FM satellite, along with SO-50, AO-27 and PO-101. RS-44, a linear satellite for SSB and CW, is far and away the most popular for those modes. RS-44 is in a higher orbit providing less Doppler shift and longer contact times per pass. You can easily see from the Amsat status page which satellites are in operation and which are the most popular. Many of the ham satellites do not provide two-way communication capability, but still have beacons (CW and data) that can be heard (those are in YELLOW on the Amsat status page). Everyone with a ham callsign can contribute by by uploading a reception report of the satellites you hear or work.

Full-duplex on SSB/CW satellite work is very desirable but not mandatory. I have learned you can make contacts without it coupled with a little skill and some luck. Staying near the center of the satellite’s particular passband is helpful. Sadly, there are few full-duplex rigs available these days. One of the best may be the Yaesu FT-847 which can be found on the used market. Some satellite ops are using SDRs for RX and a ham rig for TX to achieve full-duplex. I’m going to try that soon using two Diamond discones and vertical separation.

For current status of all ham satellites and ARISS operation, go here:

https://www.amsat.org/status/index.php

Tracking

For tracking the ham sats and ISS, I like the Heavens-Above app (or Webpage: https://heavens-above.com/). The Pro version of Heavens Above is worth every penny. In the app, I put only the active satellites I am interested in in the search box. That way all the remaining unusable satellites will be ignored. Heavens-Above also lists the satellite operating frequencies for a quick reference.

 

One cool side note. With Heavens-Above, you can also see when ISS visible passes are available over your area (almost always near sunrise/sunset). Look for the passes with a magnitude greater than -3.0. If you have clear skies or a thin layer of clouds it’s quite a treat to see the ISS zoom overhead at 17, 000 miles per hour. When the ARISS repeater is operating, you can see and hear the ISS! The screen shot above is a visible pass at -3.9 magnitude, as bright as Venus.

Antennas

I have found my Diamond discone to work quite well for satellite operation. It’s probably the cheapest, simplest and most effective antenna you can use for this application If you really get interested in satellite work you can always spend the big bucks for AZ/EL rotators and beams as well as the software to run it all including tuning your rig to compensate for Doppler shift. Or you can buy quite expensive omni-directional antennas designed specifically for satellite use. So far, the KISS approach has worked well for me.

The Future Is Now

Finally, we can all get a taste of the future now by listening to the only ham radio geosynchronous satellite currently in operation, QO-100. It is centered on Europe and covers about 1/3 of the earth from Brazil to parts of Asia.

It was a thrill for me to listen (via the WebSDR listed below) to one of my new satellite colleagues, Mr Kob, E21EJC, who I call “Mr Satellite,” work Brazil and many other stations in the EU, the Middle-east and elsewhere through QO-100 during a special event operation from Thailand.

Anybody can listen to activity on QO-100 at the link below. When you get there just find the CLICK TO START SOUND! button. Then, click UNDER one of the signals in the waterfall and tune with the controls below. Weekends and holidays seem to be the best time to listen.

https://eshail.batc.org.uk/nb/

Because both the uplink and downlink frequencies are way up in the microwave bands, it’s not easy to get on QO-100, but, it appears to me, worth the effort. Maybe one day we will have two more QO-100-like birds linked together to cover the whole earth for 24/7 communication anywhere in the world. One can dream.

Full details about the QO-100 geosynchronous satellite can be found here:

https://amsat-uk.org/satellites/geo/eshail-2/

CQ Satellite!

When the propagation is bad, or actually anytime, ham satellites are a wonderful alternative to HF for having fun on the air.

Sorry, gotta go, RS-44 is just about here. CQ satellite, CQ satellite, de VR2HF…


Thank you so much for the satellite overview, Dan!

You’ve inspired me to get out of my comfort zone and try a little satellite work! The perfect project to do with my two daughters. I’m such a “below 30MHz” guy, I have to remind myself that there are actually some pretty amazing things you can do further up the band! When I purchase a discone antenna, I’m going to accuse you of being an enabler. Fair warning.

SWLing Post readers: Anyone else here tune to and track satellites? Please comment!

Spread the radio love

Lockdown Lunacy: QRP EME has now been added to the Social DX bucket list

When my buddy, Pete dives into a project that would have otherwise been placed on the backburner, had it not been for sheltering at home during the Covd-19 pandemic, he calls it an episode of “Lockdown Lunacy.”

Lockdown Lunancy

I don’t think there could be a better name for the bug that has bitten me.

Since my earliest days of reading ham radio magazines–well before I was licensed–I found the concept of EME (Earth-Moon-Earth) communications absolutely fascinating. I mean, communicating with someone across vast distances by bouncing signals off the freaking moon?!?

What’s not to love?

After becoming a ham, the reality set in about how much equipment and financial resources it would take to set up an EME station in 1997. I would need big X/Y/Z steerable antennas, big amplifiers, and very pricey transceivers. Even if I built half the system, I couldn’t imagine piecing it together for less than $3,000 US.

Plus, HF/shortwave signal work was what really pushed me into the world of ham radio.  Once I set up my first dipole and started making DX contacts with my Icom IC-735, I never really looked back…that is, until, I met Bill.

In 2016, my family spent yet another summer on the east coast of Prince Edward Island, Canada, in an off-grid cottage.

The cottage living area.

I brought along my Elecraft KX3, of course, with a LiFePo external battery and PV panel for charging One day, I hopped on the 17 meter band to work a little DX with a large dipole I’d set up in the trees behind the house. After turning on the rig, I heard a PEI amateur radio operator working another strong station in Europe. As he sent his 73s to the other station, I quickly interrupted and asked where he was located. Turns out, he was only 5 km way as the crow flies! After a quick chat, he invited me over for coffee the next morning and to talk radio.

That next morning I discovered two things about Bill (VY2WM / VY2EME):

Firstly, he’s a coffee snob…just like me. Best coffee I’d ever had on the island.

Secondly, the man had been bitten by the EME bug. Indeed, the mission to build a station to do moon bounce communications is really what energized him to play radio.  We spoke at length about EME and it was then I realized that QRP EME was an actual “thing.”

Bill informed me that, with the advent of weak-signal digital modes like JT-65, QRP EME contacts were possible for almost anyone and the investment in equipment, much more modest than in the past. I was truly impressed with how, over the course of a few years, Bill slowly and methodically built his station and started making contacts. Bill gave a lot of credit to his EME Elmer, Serge (VE1KG)–just check out Serge’s big gun station on his QSL card below:

Though Bill didn’t know it at the time, our little talk re-ignited my interest in EME.

Bill and I have kept in touch over the years and only last week, after talking EME a bit more via email, I realized it was time I start my own little QRP EME station.

One thing that pushed me to commit to EME is the fact that both of my daughters are studying for their Technician licenses at present. Both are into all things astronomy and space, so I thought it might be rather fun to give them a chance to play radio off the moon with their Tech licenses!

Like Bill, I plan to take time assembling my QRP EME station. I would like to have all of the components together by December and perhaps start building things like a long yagi and some sort of antenna support by next spring.

I’m facing a big learning curve here. Other than what I learned on my ham radio license prep, I know little to nothing about signals north of 30 MHz!

But that’s the thing about radio in general: I love learning new skills and exploring the world just a little outside my comfort zone!

I’m already putting out feelers for a good transceiver (thinking a used Yaesu FT-897 or FT-100D).

Yaesu FT-897 via Universal Radio

How committed am I? A QRP EME station has been officially added to my Social DX bucket list. That’s pretty darn serious!

Post readers: Any EME enthusiasts in our community?  If so, please comment with any suggestions you may have as I dive deeper into the world of moon bounce!

Spread the radio love

Historic Trans-Atlantic VHF Contact Made

(Source: Southgate ARC via Mike Hansgen)

Historic trans-Atlantic contact made on 144 MHz

A historic contact was made on Sunday the 16th June 2019 when the Atlantic was spanned for the first time on 144 MHz.

D41CV on Cape Verde Islands off the coast of Africa managed to work FG8OJ in Guadeloupe on 144.174 MHz using the FT8 digital mode.
The distance was an incredible 3,867 kms.

To put that into context, the distance from the west coast of Ireland to Newfoundland is 3,000 kms.

Tropo prediction maps show a path right across the Atlantic and suggest that even more incredble contacts may be possible.

More info here… 
https://ei7gl.blogspot.com/2019/06/historic-trans-atlantic-contact-made-on.html

Spread the radio love

ARRL takes minor exception to wording of FCC Enforcement Advisory regarding uncertified two-way radios

Many thanks to SWLing Post contributor, Eric McFadden, who shares the following ARRL response to the FCC Enforcement Advisory we posted last week. The following was published in the ARRL News:

ARRL has taken a minor exception to the wording of a September 24 FCC Enforcement Advisory pertaining to the importation, marketing and sale of VHF and UHF transceivers and is in discussion with FCC personnel to resolve the matter. The Enforcement Advisory was in response to the importation into the US of certain radio products that are not FCC certified for use in any radio service, but identified as Amateur Radio equipment.

“While much of this equipment is actually usable on Amateur bands, the radios are also capable of operation on non-amateur frequencies allocated to radio services that require the use of equipment that has been FCC-certified,” ARRL said. “Such equipment is being marketed principally to the general public via mass e-marketers and not to Amateur Radio licensees.”

[…]“In several places, the Enforcement Advisory makes the point that ‘anyone importing, advertising or selling such noncompliant devices should stop immediately, and anyone owning such devices should not use them,’” ARRL pointed out. “The Advisory broadly prohibits the ‘use’ of such radios, but our view is that there is no such prohibition relative to licensed Amateur Radio use — entirely within amateur allocations — of a radio that may be capable of operation in non-amateur spectrum, as long as it is not actually used to transmit in non-amateur spectrum.

ARRL has had extensive discussions about this issue with FCC Wireless Bureau and Enforcement Bureau staff, and those discussions are ongoing.[…]

Click here to read the full news article.

Spread the radio love

New Zealand prohibits unrestricted two-way radios

(Source: Southgate ARC)

New Zealand’s regulator RSM reports:
In August, we mentioned creating a prohibition notice for unrestricted two-way radios. This was to limit the availability to the general public for radios that don’t meet the Radio Standards.

The prohibition notice is ready to gazette and will come into effect on 18 October 2018.

The notice will affect the supply of two-way radios like Baofeng, Pofung and Wouxun to the amateur market, but not equipment factory locked to the Amateur bands.

Amateur radio operators or suppliers need to hold a ‘Licence to supply radio transmitters’ to import and supply this equipment.
When you’ve received your Licence to supply number, email us at [email protected]. We’ll add special conditions to your licence to allow the import and supply of this equipment.  You’ll need to supply us monthly returns of your imports and sales, including nil returns.

Application for licence to supply radio transmitters – Individual

Application for licence to supply radio transmitters – Organisation

Click here to read a similar announcement by FCC Enforcement.

Spread the radio love

The end of cheap non-compliant VHF/UHF two-way radios?

Many thanks to SWLing Post contributor, Dave Zantow (N9EWO), who references this thread on RadioReference.com regarding the following FCC Enforcement Advisory:

The Enforcement Bureau (Bureau) of the Federal Communications Commission (FCC) has observed that a growing number of conventional retailers and websites advertise and sell low-cost, two-way VHF/UHF radios that do not comply with the FCC’s rules. Such devices are used primarily for short-distance, two-way voice communications and are frequently imported into the United States. These radios must be authorized by the FCC prior to being imported, advertised, sold, or operated in the United States.

Many of these radios violate one or more FCC technical requirements. For example, some can be modified to transmit on public safety and other land mobile channels for which they are not authorized, while others are capable of prohibited wideband operations.

Such radios are illegal, and many have the potential to negatively affect public safety, aviation, and other operations by Federal, state, and local agencies, as well as private users. Because these devices must be, but have not been, authorized by the FCC, the devices may not be imported into the United States, retailers may not advertise or sell them, and no one may use them. Rather, these devices may only be imported, advertised, sold, or used only if the FCC first has approved them under its equipment authorization process (or unless the devices operate exclusively on frequencies reserved for amateur licensees or they are intended for use exclusively by the federal government). Moreover, with only very limited exceptions, after being authorized, the devices may not be modified. Anyone importing, advertising or selling such noncompliant devices should stop immediately, and anyone owning such devices should not use them. Violators may be subject to substantial monetary penalties.

What Should You Know?

The Bureau has noted an increase in the manufacturing, importation, advertising, and sale of two-way VHF/UHF radios that are not authorized in accordance with the Commission’s rules. Generally, electronic devices that intentionally emit radio waves are required to be certified by the FCC or an authorized third-party certification entity (Telecommunications Certification Body) prior to importation, advertising, sale, or use. Two-way VHF/UHF radios require FCC certification to show compliance with our rules, unless they qualify for a limited exception (see Amateur Radio Exception, below, and Federal government exception at footnote 4).

This certification requirement ensures that equipment complies with technical requirements to avoid causing interference to federal government operations, private licensed operations, and other authorized operations or equipment. Equipment that does not comply with the technical requirements cannot be certified and thus cannot be imported, advertised, sold, or used.

Amateur Radio Exception. There is one exception to this certification requirement: if a device is capable of operating only on frequencies that the FCC has allocated for use by Amateur Radio Service licensees, it does not require FCC equipment authorization,8 and an amateur licensee may use his or her license to operate such radios. However, many two-way radios that purport to operate on amateur frequencies also operate on frequencies that extend beyond the designated amateur frequency bands. If a two-way VHF/UHF radio is capable of operating outside of the amateur frequency bands, it cannot be imported, advertised, sold, or operated within the United States without an FCC equipment certification.

Even if a two-way VHF/UHF radio operates solely within the amateur frequencies, the operator is required to have an amateur license to operate the device and must otherwise comply with all applicable rules. The Bureau will take very seriously any reports of failures of two-way radio operators to comply with all relevant rules and requirements when using devices in the amateur bands.

What Happens If Manufacturers, Retailers, or Operators Do Not Comply with the FCC’s Rules?

Violators of the Commission’s marketing rules may be subject to the penalties authorized by the Communications Act, including, but not limited to, substantial monetary fines (up to $19,639 per day of marketing violations and up to $147,290 for an ongoing violation).

What Should You Do?

The FCC rules governing two-way VHF/UHF radios are designed to minimize interference to all authorized spectrum users, including important government and public safety operations. Manufacturers, importers, retailers, and radio operators should take the time to learn the FCC rules governing equipment authorization and comply with them. When manufacturing, importing, advertising or selling two-way radios and accessories that either are electronic or have electronic components, manufacturers, importers and marketers should ensure that such devices or components are properly certified and labeled as FCCcompliant and cannot be easily modified to operate outside its grant of certification. Prior to purchase or operation, individuals should ensure that a device is either labeled as FCC-compliant or operates solely within amateur frequencies.

Need more information? For additional information regarding equipment marketing and amateur radio rules, please visit the FCC website at https://www.fcc.gov/engineering-technology/laboratory-division/general/equipmentauthorization and https://www.fcc.gov/wireless/bureau-divisions/mobility-division/amateur-radio-service, respectively. Media inquiries should be directed to Will Wiquist at (202) 418-0509 or [email protected].

To file a complaint, visit https://consumercomplaints.fcc.gov or call 1-888-CALL-FCC.

Click here to download the full advisory including footnotes (PDF).

I can’t imagine how many of these non-compliant HTs are floating around on the market. I’m guessing this could also affect the sale of used non-compliant radios–? I’m sure there are a number of amateur radio retailers that have a vast inventory of non-compliant radios that they can no longer sell, without potentially facing serious fines by the FCC.

Spread the radio love

Sean’s recording of an International Space Station EVA

ISSSean Gilbert, WRTH’s International Editor, recently shared this audio he originally recorded on June 19, 2014. Sean writes:

With all the interest in space and the ISS at the moment, I thought I would share a recording I made on 19 June 2014 @ 1715 UTC. This is from the Russian part of the ISS and the audio (which is in Russian) is of the cosmonauts talking during a spacewalk (EVA as they are known). The person speaking is actually in space, outside of the ISS. The audio begins about 2 mins into the recording and lasts for about 5 mins.

[Listen via the embedded player below, or click here for the MP3 version.]

[…]This was received on 143.625MHz NFM (+/- a few kHz due to doppler shift). Receiver here was a Funcube Dongle Pro + into a 2 element circular polarised turnstile in the attic. Signal was lost at a distance of 2000km (to the East of my location in IO92ma) at 3 degree elevation. Altitude of ISS was 418km above earth. 

Sean-Gilbert-ISS-Screen-Cap-Spectrum

The image [above] shows a grab of the signal, exhibiting doppler shift due to the ISS orbit in relation to the earth.

 […]I would be interested to know what they are saying. […]To me this was far more exciting than receiving SSTV pictures from the ISS. I may never hear another EVA – I am just thankful that I found this as it was an announced/schedules EVA.

That is very cool, indeed, Sean! At some point, I must make an effort to venture up to the VHF neighborhood and attempt to hear the ISS.

I hope there’s a Russophone reader out there who can help Sean interpret the EVA dialog! Please comment!

Spread the radio love