Shortwave listening and everything radio including reviews, broadcasting, ham radio, field operation, DXing, maker kits, travel, emergency gear, events, and more
Many thanks to Simon Brown for updating SDR-Console V3 Preview to fully support both the RSP1 and the RSP2- you can download the software from http://sdr-radio.com/v3_preview_downloads (be sure to click on the software link under where it says ‘Downloads’ unless you want to download the software from the advertisers who support Simon’s work!)
As new YouTube demo videos of SDR-Console V3 in action become available, we will add them to the playlists on our YouTube Channel: www.youtube.com/c/SDRplayRSP
Jon Hudson with SDRplay recently noted the following tutorial videos in an SDRplay discussion forum. Since I’m also trying to learn the ropes of SDRuno, I thought I’d share this here on the SWLing Post.
Jon notes:
These video guides are very helpful for newcomers to SDRuno and the RSP1 or RSP2:
RSP1: https://youtu.be/xBGHB0oMXHU
This morning, SDRplay Limited announced the release––and availability––of their second generation software defined radio, the RSP2.
Regular SWLing Post readers will note that I’m a pretty big fan of SDRplay’s first SDR, the RSP, or “RSP1,” as I’ll now call it (I published a review of the RSP1 in July 2015). To me, the $129 RSP1 has been the best wideband receiver you can buy under $200 US. Its HF performance, in particular, is sincerely impressive at this price point.
Introducing the RSP2
So what’s the RSP2, and how does it differ from the original RSP?
In a nutshell, here’s how SDRplay describes the difference between the two:
“The RSP2 delivers a significant number of additional features which result in a higher spec for specialist amateur radio users as well as benefits for additional scientific, educational and industrial SDR applications.”
In a sense, the RSP2 gives the enthusiast and experimenter access to more receiver parameters and control, opening it to a wider array of possible applications. The RSP2 will also cover a broader range, from as low as 1 kHz to as high as to 2 GHz, and is designed with better selectivity across the spectrum. Enhanced selectivity will certainly benefit amateur radio operators and SWL DXers who might seek weak signals in crowded portions of the band.
The following list outlines the primary additional features of the RSP2 (via SDRplay’s press release):
10 built-in, front-end pre-selection filters, with substantially enhanced selectivity
Frequency coverage extended down to 1 KHz
Software selectable variable gain Low Noise Preamplifier
2 x SMA Software Selectable 50? RF ports (1.5 MHz – 2 GHz)
1 x High Impedance RF port (1 kHz – 30 MHz)
Built-in software selectable MW /FM notch filters
Highly stable 0.5PPM TCXO trimmable to 0.01PPM
24MHz Reference clock input / output connections
4.7V Bias-T option (on one of the software selectable antenna inputs)
RF screening within a strong plastic case for the standard RSP2
A Rugged metal box version – the ‘RSP2pro’
The RSP2 has a total of three antenna ports: two SMA and one Hi Z for optimal LW/MW/SW performance
For the moment, the RSP2 only works with SDRplay’s own application, SDRuno. But SDRplay is already working with developers to make the RSP2 compatible with HDSDR, Gnu Radio, CubicSDR, and SDR Console. I appreciate that although the RSP series has an excellent free proprietary application (SDRuno), it was nonetheless developed with many open-source applications, also free, as well. This level of compatibility and support makes SDRplay rather unique among SDR manufacturers.
SDRuno running the RSP2 (click to enlarge).
Of course, SDRuno is a great application in its own right, and pairing it with the RSP2 will provide you with out-of-the-box calibrated RF and S meters. So far I’m very pleased with native SDRuno features like virtual receivers, embedded time code, spectrum display options, and streamlined design.
Current SDRuno users will note the different antenna and filter options with the RSP2 which works natively with the latest versions of SDRuno (click to enlarge).
SDRuno installs very easily and provides a plug-and-play experience. It does have a modest learning curve, but SDRplay has an excellent owner’s manual and “cookbook” available to help you set everything up the first time.
Preliminary impressions of the RSP2
SDRplay sent me a pre-release RSP2 (the base model, not the metal box “Pro” version) to evaluate and provide the company with feedback.
I installed SDRuno and put it on the air only this past week. In truth, as I’ve been traveling and must be on the road again this coming week, I prefer not to comment, at least in depth, on the SDRplay’s performance as I’ve had comparatively little dedicated time with the unit.
Yet I have had the RSP2 on the air a few hours of casual listening, and find that it performs as I would expect: low noise characteristics and sensitivity that seems to be at least as good as the RSP1, if not a bit better. I’m looking forward to a side-by-side with the RSP1 running an install of SDRuno on my laptop!
I must say that I’m very pleased with the RSP2’s Mediumwave/FM notch filter. It happens that a local daytime 45kW AM broadcaster in our area is having transmitter issues which send wideband spurs across the entire HF spectrum; but at night, when the station lowers its power levels, the RSP2’s MW notch filter effectively mitigates the noisy signal. I imagine this filter will be a welcome addition for listeners living in RF-dense environments.
When the RSP1 was first introduced, it retailed for $149. As the economies of scale worked in their favor, SDRplay lowered the price to $129. The new RSP2, meanwhile, is expected to retail at approximately £130 (excluding taxes), or $169 US (excluding taxes). Quite a value, in my opinion: at $169, you’re getting a lot of SDR for the price––and an effective SDR application, to boot.
But if you already own an RSP1, I wouldn’t necessarily rush out and grab the RSP2 just yet. Of course, if you like the added features mentioned above, or if you’d like an inexpensive SDR with no less than three switchable antenna ports and a MW/FM notch filter, $169 is a bargain and about the same level of investment as a good modern shortwave portable.
As for myself, I’m happy to see a mom-and-pop community-supported company like SDRplay continuing to innovate for our hobby. I’m pleased to support them, and am truly appreciative that they also support our SWLing Post. This is a win-win, in my view; I’d be pleased to support more such companies.
Again, check back here as I plan to compare the RSP2 with the RSP1 and several of my other SDRs.
I plan to take the RSP2 with me on my travels this week. Time permitting, I might even pair it with my recently acquired PK magnetic loop antenna for some spectrum gathering and testing.
In the coming weeks, as my schedule permits, I’ll post updates here on the SWLing Post, including audio comparisons with some of my SDRs. If interested, bookmark the tag RSP2.
For more information about RSP2 pricing and availability, check out SDRplay.com.
Today, we released version 1.1 of SDRuno, specifically for RSP. New features include a calibrated power measurement facility, an SNR meter and automatic S-meter calibration. There are many additional improvements and fixes. To find out more about all the additional features, documentation can be found on:
Paul Jones and Mike Ladd have worked tirelessly to get the new features documented in an updated version of the SDRuno Cookbook: http://www.nn4f.com/SDRuno-cookbook.pdf
Other SDRs can also use SDRuno with a new increased bandwidth limit of 2.5MHz.
Many thanks to Jon Hudson at SDRplay for sharing this info!
Thomas, not sure if this is something relevant but airlines now state it is OK to use an am/fm radio on board aircraft.
Not much possibilities for AM unfortunately but on a recent flight from Ft Lauderdale to Dallas and Albuquerque I hooked up an SDRPlay receiver to a 3 inch stick antenna and recorded a few stations I was able to pick up along the way.
I did take a few more videos flying between JFK and MIA as well.
I used the following equipment:
1. 13 inch laptop that I also use for work
2. SDRPlay receiver
3. Old scanner antenna that I happened to have
4. SDRUno software to drive the radio
5. Screen recorder that comes with the Win 10 Xbox app
6. Windows movie maker to stitch the individual clips together and annotate
If needed, the size of the setup above can shrink further if a smaller laptop/tablet is used and an RTL dongle instead of SDRPlay.
You will also need to equip yourself with a window seat. Otherwise, signals are significantly weaker.
I did not place the antenna in a special position, just next to me on the seat where it could not be noticed by other passengers. I uploaded a few more videos from my weekly shuttle flights between MIA an JFK.
Ivan NO2CW
Wow! Thanks so much, for sharing this, Ivan.
I’ve always packed a simple FM-capable radio in my one, compact carry on bag and typically try a little FM DX travel while in flight. I was never aware there was a restriction on using an FM receiver in flight, but I’ve always kept my radio listening very discrete so it’s never been a problem.
I love the idea of doing in-flight FM spectrum captures! It would be fun to watch signals on the spectrum shift and change as the flight progresses. Very cool, Ivan!
Post readers: Have you ever made in-flight FM spectrum captures like Ivan? Please comment!
My long awaited “SDRplay RSP” review is now available. My apologies for the delay. It took more time then I had planned and other issues got in the way. We also tested it with the popular DSD+ software and worked well after some troubleshooting.
I always enjoy your reviews, Dave! As you say, reviewing SDRs certainly takes more time than reviewing stand-alone receivers–especially when there are so many options for SDR applications! Like you, I feel like the SDRplay RSP offers a good value for the listener–especially at the $129 price point.
Spread the radio love
Please support this website by adding us to your whitelist in your ad blocker. Ads are what helps us bring you premium content! Thank you!
Many thanks to Jon Hudson at SDRplay who has just informed me that SDR-Console V3 Preview supports the new SDRplay RSP2.
