Tag Archives: FDM-DUO

200 metre longwire: Radio Verdad 4054.9 kHz, Guatemala, unprecedented reception in Oxford, UK

Radio Verdad, Chiquimula, Guatemala is quite a regular catch at home, however, their modulation is nearly always weak as the carrier struggles to lift above the ubiquitous blanket of local QRM. Another issue with hearing this station is the digital utility signal just above 4055 kHz, thus requiring LSB reception to reject the adjacent noise.

This particular recording of Radio Verdad was taken during a DX’pedition using the 200 metre longwire and is unprecedented in signal strength and clarity – in my personal experience. With fully discernible audio both the Elad FDM DUO and Sony ICF-2001D receivers perform very well with my experimental 200 metre antenna. I should point out that the audio from the Sony is significantly louder because the speaker on the Elad is puny, to say the least. However, the reception on the Elad sounds to me at least, superior to the Sony in terms of SNR, which is everything in Tropical Band DXing. As usual, I welcome your comments. Recorded in Oxford UK on 31/07/18 at 03:31 hrs UTC. Thanks for watching.

Direct link to the Oxford Shortwave Log reception video of Radio Verdad, Guatemala

Clint Gouveia is the author of this post and a regular contributor to the SWLing Post. Clint actively publishes videos of his shortwave radio excursions on his YouTube channel: Oxford Shortwave Log. Clint is based in Oxfordshire, England.

Spread the radio love

DX’pedition: first test of deployable 200 metre longwire antenna by Oxford Shortwave Log

10 Replies

A view looking toward Oxford Shortwave Log DX’pedition territory; a wood in rural Oxfordshire

Regular viewers of my youtube channel will know that I spend much of my shortwave listening time out in an Oxfordshire wood where QRM is negligable and Tropical Band stations can be heard with, at times, unprecidented signal-to-noise. Regular viewers will also be aware that I enjoy experimenting with different antenna set-ups, particularly pushing the boundaries with longwires coupled to portables. Having applied my rather modest practical skills, I constructed a 200 metre deployable 200 metre longwire antenna and finally got around to testing it, with my Elad FDM DUO and Sony ICF-2001D. There are a number of reception videos still to be uploaded to the Oxford Shortwave Log youtube channel, howvever, the immediate information and entertainment of SWLing Post readers, I have included two here. 🙂

The first is the more commonly heard Emisoras Pio XII from Boliva on 5952.5 kHz using the Sony and the second, the much more rarely reported Radio Chaski from Peru on 5979.9 kHz using the Elad. Both reception videos were very encouraging. In fact, I would go so far as to say they demonstrated excellent reception witihin the framework of their respective contexts. Emisoras Pio XII was almost booming with unprecidented signal strength and clarity, whilst Radio Chaski was heard with discernible audio. Neither station had been received as well at my QTH or the woods, previously.

Direct link to reception video of Emisoras Pio XII from Boliva on 5952.5 kHz

Direct link to reception video of Radio Chaski from Peru on 5979.9 kHz

I hope this gives other DXers ‘food for thought’ with regard to experimenting with antennas and perhaps more importantly, making significant improvements to SNR by removing themselves from the ubiquitous blanket of QRM generated by all of those devices at home that are intrinsic to modern life. Thanks for watching. 73.

Spread the radio love

Turn your Elad FDM DUO into a portable receiver, with a 200 metre longwire

5 Replies

As some of the subscribers to Oxford Shortwave Log will know, I’ve been talking about building a battery pack for my Elad FDM DUO to take it out on a DXpedition. Finally, I found the time to quickly do just that with some parts that cost less than £10 – as the video below demonstrates in more detail. The FDM DUO input voltage is stated as 13.8V and although 12V would probably have been sufficient, a couple of very cheap battery cases later, 9 x 1.5V ‘C’ cells and about 20 minutes of somewhat unpractised soldering did the trick. I have also put together a 200 metre longwire antenna, deployable from a large spool, with a termination connector to add resistor grounding for a Beverage Antenna configuration, should I wish to do so in the future. I used two spools of 100 metre equipment cable, soldered together and protected with heat-shrink.

Direct link to Oxford Shortwave Log channel

Regular viewers of my youtube channel will know that I spend much of my shortwave listening time out in an Oxfordshire wood where QRM is negligable and Tropical Band stations can be heard with, at times, unprecidented signal-to-noise. This is the first time I’ve used a longwire greater than 100 metres in length, however, to be resonant at two wavelengths for 90 metres and 3 wavelengths for 60 metres was the objective. I hope the already fine Tropical Band listening to be had out in the Oxfordshire countryside will improve further.

Spread the radio love