Shortwave listening and everything radio including reviews, broadcasting, ham radio, field operation, DXing, maker kits, travel, emergency gear, events, and more
Earlier this year, I posted a review of the CC Skywave SSB: C. Crane’s latest ultra-compact travel AM/FM/WX/AIR/shortwave radio.
If you’ve been following this little radio, you might remember that early first production models had issues—indeed, all six production units I tested had issues–that prevented me from releasing my full review before the end of 2017.
The main problem that plagued my first production run units was a background audio whine/tone. Here’s the description from my full review:
Upon careful listening, I discovered the production unit had a faint, internally-generated whine on some of the shortwave bands; when tuned to marginal signals, this whine manifested in the form of variable background noise. Between signals it was audible as a faint background whine, hardly noticeable. With that said, the whine was most notable while tuning––since the Skywave SSB mutes between frequency changes, the whine was most conspicuous during audio recovery between steps.
I later discovered that part of the problem was related to an alignment issue that C. Crane had to address in-house on their first production inventory.
Second production run evaluation
A few weeks ago, C. Crane sent me one of the first CC Skywave SSB units from their second production.
Due to my hectic schedule after almost two months of travel in Canada, I’ve only gotten around to checking the new unit this past week.
I put the CC Skywave SSB on the air and carefully tested it across the bands.
Fixed: No more whine!
I’m very pleased to report that this unit shows no signs of the internally-generated noises that plagued all six of my first production run units!
In fact, the second production unit’s performance is identical to that of the pre-production CC Skywave SSB which I’ve so admired. I’ve compared the units side-by-side and would not be able to tell them apart if it weren’t for a silk-screen error on the back of the pre-production unit.
C. Crane also sent me a second production run CCRadio-EP Pro. If you recall from my review, this model also had several issues that prevented me from recommending it–primarily: muting between frequencies, images, fixed 10 kHz steps on mediumwave, and an inaccurate analog dial.
I’ll start evaluating the EP Pro this week and report back soon. Bookmark CCRadio-EP Pro to follow updates.
When the clouds part and the sun shines during the winter in the Seattle, Washington area, it’s time for a celebration! I decided to take advantage of the mild weather and compare the XDATA D-808 (a real upstart in the marketplace, and a value leader in portables) against a few other radios on a nice daytime signal from Radio New Zealand International, 15720 kHz.
Besides the D-808, receivers compared to each other were: the C. Crane Skywave SSB (complete with stray cat’s whisker on the LCD :^) , the Eton Executive Satellit, the Grundig G3, and a beautiful example of the rare Sony ICF-SW1000T (sometimes called the Sony Shortwave Walkman due to the built-in cassette recorder). My apologies for the lower audio setting on the G3.
The antenna used with each radio was a PK Loops “Ham Loop” antenna, which is advertised as covering 3.5 – 14.5 MHz, but my loop actually tunes approximately 3.2 MHz to 15.8 MHz. I also briefly received RNZI on each radio’s own whip antenna.
I used the 3.0 kHz bandwidth on all the SiLabs DSP radios, and the narrow filter on the G3. The ICF-SW1000T has a single filter, so it cannot be adjusted.
Since the G3 and the ICF-SW1000T have the option of synchronous-AM detection, in the video I cycle through those modes on these receivers.
RNZI on their 15720 kHz frequency is often at a good, program listening level in my local afternoons. Next week I plan to seek out and share videos of the D-808 with weak DX signals from an RF-quiet location on the Oregon coast.
Which receiver sounds the best to you with the external antenna, and which one shines with its own whip aerial? Please share your thoughts in the comments below.
Guy Atkins is a Sr. Graphic Designer for T-Mobile and lives near Seattle, Washington. He’s a regular contributor to the SWLing Post.
I recently received a new XHDATA D-808 SSB portable receiver, after AliExpress had a $69 USD introductory sale. I’m intrigued by this new model, as it uses the SiLabs Si4735 DSP chip, the same “brains” that powers the Eton Satellit (and Executive version), and C. Crane Skywave SSB. I believe the same Si4735 is found in Tecsun’s PL-880 and the CountyComm GP-5/SSB. A key feature found in all of these radios is USB/LSB modes and 10-Hz tuning step in SSB.
It would be a mistake to assume that all portable DSP receivers with the same SiLabs chip will perform equally; quite the opposite! They all have reception differences that owners will notice. I certainly noticed differences in sensitivity, AGC action, audio quality, and (to some extent) variations in adjacent channel (splatter) rejection between receivers using the same bandwidth. I made these observations when I owned the PL-880 and GP-5/SSB radios. Differences in the circuitry surrounding the SiLabs chip, as well the sizes of MW ferrite loopstick antennas and SW/FM whip antennas contribute to each receiver’s personality.
Below are four videos showing the D-808’s reception of three weaker daytime medium wave stations from indoors at my suburban Seattle-Tacoma (WA) home, plus one video of a shortwave reception in the 41 meter band. The XHDATA D-808 is compared to C. Crane’s newest Skywave radio, the SSB model, and the Eton Executive Satellit. Although brief, these tests show how the new XHDATA portable is a welcome competitor to the field of modern, compact SSB-capable radios:
What about single sideband? These four videos show reception in AM mode only, but rest assured the D-808 is very capable on the SSB modes of LSB and USB! A separate fine tuning rotary wheel on the right side of the radio’s case offers adjustment in 10 Hertz increments. The effect feels very similar to tuning CountyComm’s GP-5/SSB “walkie-talkie” style receiver. The plus or minus (+/-) offset is displayed in multiples of 10 Hz steps as “-1”, “-2”, “-3”, and so on.
I hope to post some future videos showing SSB usage of the D-808.
Soft mute. The dreaded soft mute is present in AM and SSB mode to some degree, but I do not feel it is excessive. Like most radio hobbyists I’m not a fan of soft muting and prefer uninterrupted tuning with no sign of “chuffing” or lowering of noise or audio. The amount of soft mute on this radio seems the same as the Eton Executive Satellit in my opinion.
What else to like?My take–
Audio. I find the D-808’s audio quality to be slightly more mellow or warmer…I like that, especially on FM! Audio on the MW and SW bands still has a crispness that aids in DXing on those bands, however.
18650 Li-Ion battery. Not all may agree, but I like this style of battery. The D-808’s internal circuit shuts off when the battery is fully charged, or after 10 hours of charging. The radio comes with a 18650 battery and a USB cable; the owner supplies a common 5V USB charger.
RDS on FM. This is a feature lacking on the Skywave SSB, but it is present and performs as expected with the D-808. The XHDATA radio lacks the Skywave SSB’s NOAA weather presets, however.
AM filter bandwidths. Interestingly, this receiver supplies two additional narrow AM mode bandwidths lacking in the Executive Satellit: 1.8 kHz and 1.0 kHz. It’s good to have options, although such narrow filters in AM mode sound a little muffled (offset tuning helps). The Skywave SSB does offer 1.0 kHz in AM mode, but has a 2.0 bandwidth in place of 1.8 kHz.
Backlighting. If desired, the D-808’s easy-on-the-eyes white backlight for the display can remain illuminated continually. Bravo, XHDATA! Now, if we could persuade more manufacturers to add backlighting to the keys themselves (a la the Degen DE1103/Kaito KA1103/Eton E5), we’d have more choices use in low light conditions like camping or bedside use.
Handy size. Probably a third larger than the diminutive Skywave SSB, the D-808 is still a very handy size that will fit most coat pockets, and is a smaller receiver than the Eton Executive Satellit. As you can tell from my videos, reception doesn’t suffer due to the smaller size.
Design. OK, this one’s very personal! As a graphic designer I have a real soft spot for any receiver that looks as good as it sounds, no matter what the technology or vintage. The D-808’s look really appeals to me and adds to my enjoyment while operating it. There are no unnecessary protrusions, ridges, or visual do-dads on this XHDATA model. In fact, I seem some design clues from the stylish Tecsun PL-880 in the D-808. The radio also has a quality feel to the plastic case and buttons, giving it a more “upper class” impression during use.
Antenna jack. The D-808 has the standard 3.5mm antenna port on the left side of the receiver. This is an addition I appreciate, and wish that C. Crane had included one on their Skywave SSB model. I tried this external antenna jack with an amplified PK Loops’ shortwave antenna and the combination performs excellently.
Minor annoyances
So far, the list is short! As a sacrifice to style, the manufacturer has kept all front panel buttons almost flush with the case. The effect looks great, but they are almost too low and close to the front panel. Those with larger fingers may find operation awkward or frustrating. Also, entering a shortwave frequency with less than five digits (i.e., below 10,000 kHz) requires a trailing push of the Frequency (FREQ) button.
I encourage other new owners of XHDATA’s D-808 to leave their comments below. Where does this portable rate among other radios you may own?
Guy Atkins is a Sr. Graphic Designer for T-Mobile and lives near Seattle, Washington. He’s a regular contributor to the SWLing Post.
Spread the radio love
Please support this website by adding us to your whitelist in your ad blocker. Ads are what helps us bring you premium content! Thank you!
