Yearly Archives: 2018

Replacement parts for Tecsun radios

Many thanks to SWLing Post contributor, Rich (WD3C), who writes:

Was browsing the Anon-Co site the other day and noticed they are selling replacement rotary encoders for the some Tecsun models.

As I have a PL-660 with a bad encoder decided to order one and replace it. The cost was only $5.95 with free shipping and took about 6 days from Hong Kong.

With a bit of un-soldering the replacement only took about 20 minutes and now works better than new, as the original was always a bit temperamental.

Wow–thank you for pointing this out, Rich! I didn’t realize so many parts were available including knobs, encoders, antennas, back stands and battery doors–essentially, all of the parts that are prone to damage or loss.

Click here to browse Anon-Co’s catalog for radio parts.

Spread the radio love

FCC Audio Programming Inquiry: Implications for HF Broadcasting

Many thanks to Bennett Z. Kobb, Kim Andrew Elliott, and Christopher Rumbaugh for authoring “Comments of the High Frequency Parties” that is now filed with the FCC.

Update: please also check out this FAQ.

Here’s the introduction:

The Public Notice in MB Docket 18-227 requests comment on “whether laws, regulations,
regulatory practices or demonstrated marketplace practices pose a barrier to competitive
entry into the marketplace for the delivery of audio programming … [and] concerning the
extent to which any such laws, regulations or marketplace practices affect entry barriers for
entrepreneurs and other small businesses in the marketplace for the delivery of audio
programming.”

The Commission’s Rules do pose barriers to entry and unnecessarily restrict the licensing
and delivery of programming by International Broadcast Stations.

These rules originated in a period when the government utilized or countenanced privately owned, high-frequency (HF, 3-30 MHz) broadcasters as voices against foreign adversaries.
The rules prohibit stations directed primarily to U.S. audiences. They impose detailed
language, announcement, advertising and record keeping practices, require monitoring of
foreign market particulars, and mandate a minimum DSB transmission power level that is
excessive for domestic service and textual and image content.

These and certain other obsolete restrictions are overdue for review and revision or deletion.[…]

Click here to download and read the full document as a PDF.

Click here to check out the FAQ regarding the HF Broadcasting Filing.

Spread the radio love

Radio in the field: SWLing on the coast of the St. Lawrence river

Yesterday, the weather was gorgeous here in Québec, thus a prime opportunity to find a beach, start a new book and, of course, play radio!

I found a fantastic spot on the north bank of the St. Lawrence river near Baie-St-Paul, Québec. There were only a few folks at the beach, so it was all very peaceful.

I found a picnic table perched on the edge of the beach shaded by an apple tree–a perfect spot to relax, play radio and start a new book: Dark Voyage by Alan Furst.

I brought two portables: the C. Crane CC Skywave SSB and the recently acquired Panasonic RF-B65.

I had not checked to see if propagation was good, but tuning to WWV on 10 MHz and 15 MHz confirmed that signals were travelling. In fact, as I started tuning around–first with the CC Skywave SSB, then with the Panasonic RF-B65–I discovered some of the best propagation I’ve experienced in ages!

I did a relatively quick scan covering the 31 through 19 meter bands. Some signals were absolutely booming in.

I jotted down some of the broadcast details on a make-shift log and recorded a few videos.

Note that after making the first video, I discovered I had limited space on my phone, so most of the clips are quite short:

The Voice of America

Click here to view on YouTube.

Radio France International

Click here to view on YouTube.

Radio Guinée

Click here to view on YouTube.

BBC World Service Extra English

Click here to view on YouTube.

Here are the stations I logged in the clear:

All in all it was a brilliant afternoon and the short band scan reminded me that there is still so much content to be found on the shortwaves.

You just need a little propagation, and some time to listen and explore!

Post readers: Have you snagged any elusive DX recently?  Please comment!

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

New Zealand invests in free-to-air broadcasts to Pacific

(Source: RadioInfo via William Lee)

NZ gives $10 million for Pacific Broadcasting

While Australia’s ABC is cutting shortwave Radio Australia broadcasts to the Pacific, the New Zealand government has just announced a NZ$10 million grant for an enhanced free-to-air Pasifika TV service across the region.

NZ foreign minister Winston Peters announced the plans at the Pacific Islands Forum in Nauru, with the money to be spent over the next three years to improve both quality and access for free-to-air broadcasters.

The expansion of the Pacific Cooperation Broadcasting Ltd service will also include a comprehensive training programme to support broadcasting and journalism across the Pacific, including equipment, internships and cross-regional training.[…]

Click here to read full story.

Spread the radio love

Photos from CBC/Radio-Canada broadcast house in Québec City

So as many of you now know, I’m in Québec, Canada, at the moment, and was here when Scott Simon with NPR’s Weeked Edition called.

The show’s senior producer, Ned Wharton, asked if I would mind stepping into the Radio Canada/CBC broadcast house in Québec City for a studio-to-studio interview. It’s perhaps a thirty minute drive from where I’m staying. I don’t think Ned wanted to inconvenience me, but little did he know that this radio geek has been itching to poke my head in that building for the past decade or more…Way cool!

So, I stepped in.  And it was a great experience.  Want to see what the studio looks like?

The interview took place in a small recording studio.

My recording booth at Radio-Canada/CBC Québec City

Everything (the board) was controlled by NPR at the other end of the connection. All I had to do was adjust my monitor level. Not the best photo–the front-facing camera on my old iPhone 5 can’t handle low light–but here’s another studio shot…

After the interview, I stepped outside into the atrium and took shots of the radio studio entrance and the main atrium.

Unfortunately, there was no one available to take me on a full tour as everyone was preparing afternoon shows. That’s okay, though, as I was excited just to get a peek in the studios! Great fun.

Spread the radio love

Outernet changes name to Othernet and (finally!) provides Lantern update

Back in February 2014, I first published a post about Outernet: a company with a goal to provide free access to information across the globe through a network of satellites.

I was an early backer of their crowd-funded all-in-one self-powered satellite receiver and digital storage wifi hotspot device, the Lantern. (That’s a mouthful.) In short, the Lantern was to be a portable digital library that could be updated through their satellite network. Initially, excellent progress was made on the Lantern, then availability of the CPU halted production and backers started to feel shaky when progress updates were no longer being published.

I had one specific goal in mind for the Lantern: using it for my non-profit, Ears To Our World.  I was so eager to put a system in one of our schools in Haiti, that I purchased their kit and tested it for the better part of a year hoping to learn the ropes prior to the Lantern’s release.  The system seemed to work at first, but there were many glitches: the interface with tablets and mobile phones worked intermittently and the satellite link was prone to fail either due to hangups with the CPU or something else. I never deployed it because it was simply too unreliable. (Instead, we put resources into the RACHEL-PI system).

Then, Outernet dropped usage of their geosynchronous satellites which made my equipment pretty much useless. According to Outernet, they did so to invest in a faster satellite network.

Yesterday, I finally received an email update about the Lantern device and Outernet in general. I hope Outernet (now Othernet-you’ll read about that below) keeps us better informed than they have in the past and I hope the Lantern device actually comes to fruition. I still think it’s a great idea, but my faith has been shaken.

(Source: Syed Karim at Othernet)

Broadcasting Khan Academy 24/7

Hello Backers,

Yes, we are still here. It’s been a long while since the last update, but that does not mean we have stopped–or even slowed–working on Lantern. We have been making progress, though it has been much, much slower than what everyone wants. Fortunately, we are in the final stage of development.

The last update described the new network technology we had developed. Our original goal was to broadcast 20 MB of content per day, which is what we were doing with our previous network. The new system is operating at 10-times that speed, which is a little over 20kbps and 200 MB of content per day. Some of the work we’ve been doing over the past few months is related to tripling our current download speeds. Our target is 60kbps, which results in over 600 MB per day. The size of the device will be similar to a standard flashlight.

At our current download speed of 20kbps, we are broadcasting both data and a 24/7 audio stream. I know many of you were interested in the educational applications that were highlighted during the campaign, which is why I’m very pleased to share that we are currently broadcasting the entirety of Khan Academy as a 24/7 audio stream. The Khan Academy library consists of over 900 separate lectures, which we’ve turned into a giant audio playlist. Now we just need to get Lanterns into everyone’s hands.

The next update will include a picture of our final antenna design. The antenna that is currently included in our DIY kit is 2-inches/5-cm across and the shape of a cone. We are trying to flatten the cone and also increase the size to about 4-inches/10-cm, which is what allows for greater download speeds. Since we are operating at microwave frequencies (12 GHz), both the design of the antenna and the parts to convert the high frequency to a lower one are pretty tricky. Microwave engineering is widely considered black magic, which is the main reason for the long break since the last update. We are close to turning the corner and are targeting the end of the year for our initial production run.

Unrelated to our technical work is our recent name change. We had been fighting a trademark issue for the past four years. We recently decided that it made more financial sense to change our name, rather than continue spending legal fees to defend our position. We are now Othernet (http://othernet.is). This name change does not mean we are going away, nor does it mean we are not delivering Lanterns. It’s just a legal hiccup.

Thanks for your patience and support while we get through the final stage of building what you all backed several years ago. I know it’s been a long time and we are making every possible effort to deliver something that exceeds everyone’s original expectations. Although it’s taking three times longer to develop and ship the product, what we now have will be ten-times more useful.

Spread the radio love

Radio Deal: The Grundig/Eton Mini shortwave portable

Many thanks to SWLing Post contributor, Larry, who notes that the price of the Grundig Mini has just dropped to $24.99 shipped on Amazon.com. Larry notes, “I believe this is the lowest price I’ve ever seen for the Mini which is a decent little pocket radio.”

I should add the standard Amazon disclaimer noting that they change price without notice.

Click here to purchase through Amazon.com (affiliate link).

Spread the radio love