Shortwave listening and everything radio including reviews, broadcasting, ham radio, field operation, DXing, maker kits, travel, emergency gear, events, and more
Many thanks to SWLing Post contributor, Dan Robinson, for the following guest post:
Premium Receiver Scammer(s) Back
by Dan Robinson
From time to time here on SWLing Post, we have alerted readers to scammers using multiple eBay addresses to attempt to rip off unsuspecting potential buyers and using old photographs of usually premium receivers to do so.
Well, whether this is one scammer or many, he is back. See the photos attached here, which show what is surely a fictitious eBay ID and what appear to be legitimate photos of a Panasonic RF-8000, one of the most sought after of the large portables from decades ago.
It’s not until the 4th photograph that this person provides that you see what’s involved in the scam, which is the scammer noting that he is “selling this on behalf of my company” and that the radio can be purchased “at the buy it now price only” The scammer then provides an email address to get around the standard eBay auction process, adding that he does not respond via Ebay messaging.
I have continued to alert eBay to these scams, and to their credit eBay has taken down many of these items in recent weeks and months, though occasionally eBay does miss these. eBay also does not make it immediately clear as to how to report items like this (HINT: you have to scroll down the page until you see a tiny REPORT link on the right side which takes you to multiple categories. These scam items fall under “LISTING PRACTICES” “FRAUDULENT LISTING ACTIVITIES” and “YOU SUSPECT THAT A LISTING IS FRAUDULENT”
If eBay has successfully already taken a scam item down, you will then see a confirmation page saying the item could not be found after refreshing the page. Very often, even after reporting an item, the identical item will show up within seconds or minutes under a completely different eBay ID (see the 2nd photo here on the Panasonic RF-8000 which shows a changed eBay ID)
Receivers most often seen on these scams include: AEG 1800A, Panasonic RF-8000, and usually other premium sets, and the tip off to the scam is that the seller/scammer usually always starts the price at $1.00 or $34.00 or similar level. In the case of the AEG 1800A, the scammer consistently uses the exact same photo of this rare receiver, from a sale that completed years ago.
I would encourage eBay users to join me in reporting scams like this — eBay certainly appreciates it and if you have eBay “Concierge” level service, which I do, it’s sometimes a help to them to get online and chat with eBay about the item and your report, especially if the eBay algorithms have failed to spot and take down a particular scam.
Thank you for sharing this, Dan. We appreciate insight from radio enthusiasts like you and Paolo. As Dan suggested, I encourage you to report listings that are obviously fraudulent to eBay. They will investigate the case and take action if it is a scam.
Radio Waves: Stories Making Waves in the World of Radio
Because I keep my ear to the waves, as well as receive many tips from others who do the same, I find myself privy to radio-related stories that might interest SWLing Post readers. To that end: Welcome to the SWLing Post’sRadio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!
Many thanks to SWLing Post contributors Patrick, Marcus, Mike and Tracy for the following tips:
China has banned BBC World News from broadcasting in the country, its television and radio regulator announced on Thursday.
China has criticised the BBC for its reporting on coronavirus and the persecution of ethnic minority Uighurs.
The BBC said it was “disappointed” by the decision.
It follows British media regulator Ofcom revoking state broadcaster China Global Television Network’s (CGTN) licence to broadcast in the UK.
Separately, the broadcaster Radio Television Hong Kong (RTHK) said it would stop relaying BBC World Service programming in the region, prompting condemnation from the BBC.
China’s State Film, TV and Radio Administration said that BBC World News reports about China were found to “seriously violate” broadcast guidelines, including “the requirement that news should be truthful and fair” and not “harm China’s national interests”.
It said that the BBC’s application to air for another year would not be accepted.
The BBC said in a statement: “We are disappointed that the Chinese authorities have decided to take this course of action. The BBC is the world’s most trusted international news broadcaster and reports on stories from around the world fairly, impartially and without fear or favour.”[…]
Melvyn Bragg and his guests discuss the invention of radio. In the early 1860s the Scottish physicist James Clerk Maxwell derived four equations which together describe the behaviour of electricity and magnetism. They predicted the existence of a previously unknown phenomenon: electromagnetic waves. These waves were first observed in the early 1880s, and over the next two decades a succession of scientists and engineers built increasingly elaborate devices to produce and detect them. Eventually this gave birth to a new technology: radio. The Italian Guglielmo Marconi is commonly described as the father of radio – but many other figures were involved in its development, and it was not him but a Canadian, Reginald Fessenden, who first succeeded in transmitting speech over the airwaves.
With:
Simon Schaffer
Professor of the History of Science at the University of Cambridge
Elizabeth Bruton
Postdoctoral Researcher at the University of Leeds
John Liffen
Curator of Communications at the Science Museum, London
World Radio Day 2021: Radio creates diversity and connects people (RADIOZENTRALE GmbH)
World Radio Day 2021: Radio creates diversity and connects people
World Radio Day will be announced by UNESCO for the tenth time on February 13th and once again refers to how important radio is for society and why it connects people.
Time to celebrate: UNESCO has proclaimed World Radio Day for the tenth time. In Germany, radio has been the everyday companion of people for a hundred years and, more than ever, radio is the medium of the hour. So this jubilee round provides many good reasons to pause and ask what radio means for each individual, society and the world. Radio itself does not take a break, it is on the air – every day and around the clock. Radio informs, entertains and offers a variety of programs, opinions and content. As a matter of course – and yet so indispensable – radio, both large and small, is the vital voice of people and for people.
At the global level, radio remains the most widely consumed medium
The world is changing rapidly. Social and political processes are becoming more dynamic due to new technologies, the communication network is getting faster and bigger and the challenges are becoming more important. In these processes, radio not only offers diversity, classification and orientation, but is also an integral part of opinion-forming because it is the platform for democratic discourse. This unique ability to reach a wide audience means radio can shape a society through diversity and is the place for those who want to speak up.
100 years of radio in Germany
In Germany, the medium for the ears and the head cinema is celebrating its centenary this year. The innovative strength of the medium and the trust base with listeners that has grown over the decades make it possible for radio to be the medium of the hour more than ever. It is the last mass medium and at the same time can digitally reach everyone with the entire range of offers. Radio is at eye level with people – both in terms of content and technology. Because just as society and people’s everyday lives have changed dramatically, so too have listening habits and content. What remains, however, is the great art of putting complex topics into understandable words and giving diversity a voice.
“Today we are experiencing that the world is changing rapidly. We face major challenges when I think of climate change, the current corona pandemic or the debates on racism, for example. The task of radio here is to inform and classify. To make the soft tones heard and to reflect the diversity of opinions, ”says Grit Leithäuser, Managing Director of Radiozentrale. “But the most important thing is to act at eye level with the listeners. This grown connection and mutual trust are something for both sides that one should be aware of and that it has to be preserved every day. Then, in a hundred years, radio will be the medium for people who listen on whatever technical route, in order to learn from one another and to live diversity. ”
World Radio Day was first proclaimed by UNESCO in 2012 and this year it has the motto: “New World, New Radio”. At the suggestion of Spain, the General Conference of UNESCO initiated World Radio Day in memory of the founding of United Nations Radio on February 13, 1946. The aim of the day is to make the public and the media more aware of the importance of radio, to the decision-makers Encourage information to be established and made accessible through the radio.
The generic initiative Radiozentrale sees itself as a common platform for public and private radio stations as well as generic companies in the radio industry. The radio center has set itself the goal of positioning the medium of radio and providing comprehensive information about the (advertising) medium of radio. More information: www.radiozentrale.de
Broadway Bill Lee raps to Alex Dyke about growing up in Cleveland, the impact of the Beatles in 1964 and honing his craft as a DJ. Bill remembers being on-air in New York City the night that John Lennon was murdered and how he felt compelled to take to the air on September 11th 2001.
Today is UNESCO World Radio Day and this year the theme highlights diversity on the airwaves. Here’s the announcement from UNESCO:
Proclaimed in 2011 by the Member States of UNESCO, and adopted by the United Nations General Assembly in 2012 as an International Day, February 13 became World Radio Day (WRD).
Radio is a powerful medium for celebrating humanity in all its diversity and constitutes a platform for democratic discourse. At the global level, radio remains the most widely consumed medium. This unique ability to reach out the widest audience means radio can shape a society’s experience of diversity, stand as an arena for all voices to speak out, be represented and heard. Radio stations should serve diverse communities, offering a wide variety of programs, viewpoints and content, and reflect the diversity of audiences in their organizations and operations.
CELEBRATIONS IN 2021
On the occasion of World Radio Day 2021 (WRD 2021), UNESCO calls on radio stations to celebrate this event’s 10th anniversary and the more than 110 years of radio.
This edition of WRD is divided into three main sub-themes:
EVOLUTION. The world changes, radio evolves.This sub-theme refers to the resilience of the radio, to its sustainability ;
INNOVATION. The world changes, radio adapts and innovate.Radio has had to adapt to new technologies to remain the go-to medium of mobility, accessible everywhere and to everyone;
CONNECTION. The world changes, radio connects.This sub-theme highlights radio’s services to our society—natural disasters, socio-economic crises, epidemics, etc.
We may think we live in a digital age, but only half the world is currently online. Across the globe, small radio stations bind remote communities, play a dazzling array of music, educate, entertain and empower people to make change. Cameroon’s Radio Taboo, in a remote rainforest village 100 miles off the grid, relies on solar power; its journalists and engineers are all local men and women. Radio Civic Sfantu Gheorghe in the Danube Delta preserves the history of the community. Tamil Nadu’s Kadal Osai (“the sound of the ocean”) broadcasts to local fishermen about weather, fishing techniques—and climate change. In Bolivia, Radio Pio Doce is one of the last remaining stations founded in the 1950s to organise mostly indigenous tin miners against successive dictatorships. And KTNN, the Voice of the Navajo Nation, helps lift its listeners’ spirits in a time of loss and grief.
Produced by David Goren
Presented by Maria Margaronis.
Many thanks to SWLing Post contributor, 13dka, who shares the following guest post:
Dipping my toes into transatlantic MW DX
by 13dka
Most of my SWLing life I wanted to dig into MW DX but never managed to make that really happen for some reason. Then last November, I fetched my first transatlantic station while I wasn’t even trying, in a rather surprising setting:
I have to explain that my home and neighborhood got so infested with a multitude of QRM sources that I did not put my outdoor antennas back up after a storm blew them out of the trees in winter 2018/19. I just used an ML-200 loop indoors, which also has to put up with my own additional QRM sources in my den, consisting of 3 computers running 24/7 and a couple of switching power supplies, a TV, LED lighting… allowing for very basic reception as long as my neighbors don’t watch TV or use the internet. On top of that, medium wave is badly beaten by a mowing robot’s boundary wire here, making reception on several portions of the band completely impossible.
I never expected receiving any US stations on MW in that noise, but I couldn’t sleep that night and scanned the bands a bit with the IC-705 hooked up to my new YouLoop hanging over my bed for testing. I had seen the characteristic transatlantic carriers on MW many times before on my SDRs, but for some reason I never picked up anything intelligible on them in any winter season, now a lot of these carriers were there again but on 1130 there was actually modulation and it wasn’t the only station!
Small bedside loop: SWL’s dreamcatcher!
Bloomberg Radio 1130 came in with almost enjoyable quality at times, but Bloomberg is also kind of a surefire station for MW DX over here. I also picked up a station on 1120 and another one on 880 which was briefly so strong that it surmounted the strong interference from BBC Radio Wales on 882 kHz. 1120 was confirmed the next night to be KMOX in St. Louis, 880 kHz was *not* KCBS in NY – I checked that immediately, I have a KiwiSDR set to that frequency booknarked on my cellphone in case I have a craving for the 1-877-Kars-4-Kids commercial. Powerwise likely candidates for that would be CHQT (50kW) in Edmonton, CKLQ (10kW) in Manitoba or KRVN in Nebraska (50kW class B station) but this may be hard to verify due to the dominance of the BBC on that frequency. Anyway, KMOX wasn’t a bad catch for a small, passive indoor loop, that’s 7,150km or 4,440 miles from here!
Bloomberg Radio on the YouLoop:
Here’s KMOX:
This was A) quite encouraging for nighttime DXpeditions to the dike (brrr…cold!), B) a testimony for the YouLoop’s good performance on MW and C) a testimony for the IC-705 having pretty much all one could wish for in a capable MW DX radio – notch filter, passband tuning on AM, stable ECSS, waterfall display to detect stations and last but not least loads of sensitivity to make the most out of low-output antennas down on MW.
Going to the dike
Of course I just had to put on some long johns and drive to the dike around 3:00am local a few nights later, to try my luck with my ML-200 (lacking a better idea) with an 80cm diameter rigid loop. I was mildly surprised that reception wasn’t that much better than with the YouLoop at home. The overall yield wasn’t exactly outstanding compared to other people’s logs but a lot of stations were hidden in the frequency ranges that are submerged in QRM at home. My log has US/Canadian stations on 20+ different frequencies, unfortunately most of them UNID. Here are some recordings I made that night, hunting for unambiguous station IDs from North American broadcasters:
ML-200, Nov. 16th, 2020
1130 Bloomberg Radio on the ML-200:
Presumedly WABC 770 in NYC: In MW DX, never think you ID’d something properly just because you heard a city name and the frequency has a clear-channel station located there!
This is more unambiguously 1010 WINS in NYC (with a twist described later)
1030 WBZ Boston, MA – the first part of the clip is showing how it sounds when the signal is good, the second part demonstrates how reliably propagation is taking a rest while a station identifies itself.
The grandpa of AM broadcasting, 1020 KDKA:
Moving away from the east coast, this is WHAS 840 in Louisville, KY:
760 WJR Detroit, MI
Here’s a tough one, the religious content I heard with a great signal before doesn’t warrant a proper ID alone, and as per usual the station ID’d while fading out. I could ID this only with a set of big, closed headphones, which is a mandatory accessory for all extreme DX (CHRB 1140 in High River, Alberta):
Of course I was occasionally checking other bands too and got some serviceable signals from Brazil:
Clube do Para on 4885 kHz:
VOA Pinheiro from Belem, Brazil on 4960:
Going to another dike, this time it’s personal!
Time to try something completely different: A ~1,000m/3,000′ straight (and preliminary considered continuous) stretch of mesh fence along the dike heading ~345° (NNW), pointing roughly to mid-/western mainland North America. I had briefly tried its aptitude for being a “natural” Beverage antenna before – with mixed but encouraging results: Due to the fence not being terminated at the far end it may be kind of bidirectional, and according to my latest insights a Beverage style antenna doesn’t work well over very good (conductive) ground, probably even less so close (maybe 200′) to the ocean. Also, I forgot to pack the 9:1 balun I prepared for that purpose, so I just had some wire with alligator clip to connect the fence to the radio. Boo.
Accordingly, what I saw on the waterfall display didn’t look so much different than what I got from the ML-200 before – there were clearly more stations visible (as a carrier line on the waterfall) but nothing was really booming in. However, I managed to log a few more stations, such as WRKO in Boston and (the highlight of the night) 1650 KCNZ “The Fan” in Cedar Falls, IA which has only 1kW to boot at night to make the 6,940 km/4,312 mi to my dike. This may or may not be an indication that the “Beverage sheep fence” isn’t so bad after all!
“Fence”- reception, Nov. 18th, 2020:
VOCM 590, St. Johns, New Foundland, Canada’s easternmost blowtorch is like Bloomberg an indicator station for European MW DXers:
680 WRKO, Boston, MA:
1040 kHz, presumed to be WHO, Des Moines, IA: No ID, only a matching frequency and a commercial for “Jethro BBQ”, which has locations only in and around Des Moines:
Here’s 1650 KCNZ, Cedar Falls, IA with 1KW:
To put that into some relation, this is what 1KW sounds like on a very quiet 40m band in SSB (K1KW from Massachusetts on 7156 kHz producing a 9+20 signal that morning on the “Fence antenna”):
BTW, interesting bycatch – not the first time I caught WWV and WWVH on the same frequency but that morning was the first time I could hear both on 5 MHz:
So where have you been all my life, American AM stations?
A question remains – how could I miss the existence of these stations forever, then in modern SDR times see the carriers on the spectrum scope and still miss the modulation on these carriers? Or the other way around – why did I hear them now?
To begin with, when I started out with the radio hobby many decades ago, the reason for the occasional whine and whistle on some stations (particularly past midnight) wasn’t obvious to me: The last thing I suspected was that this could be interference from across the pond, with the pitch of the whine (or “het”) having a direct relation to the 9kHz vs 10kHz difference in channel spacing. Of course these stations were there all my life! Then, with just some regular radio you’d have to pick one of very few frequencies where a strong station from across the pond coincides with a nice silent gap in the local channel allocation. But until this millennium, European medium waves had no such gaps and a lot more local blowtorches.
Since that time many MW stations were turned off and demolished and whole countries abandoned MW here in Europe, so we’re in a much better spot now for transatlantic DX. Unfortunately the opposite is true for listeners on the left side of the pond, you guys still have a very crowded AM band but less potential DX targets in Europe. On the bright side, the remaining European stations are often not restricted to 50kW and you have another ocean with very distant and rewarding DX stations that are very, very hard to catch in Europe!
Wrong time, wrong place
Another bunch of factors are – of course – propagation, season and location/latitude. The MW DX season is roughly fall to spring nights (when TX and RX are in the dark) with a period of increased absorption in the middle (the “mid-winter anomaly”), signals are potentially stronger at lower latitudes and weaker at higher ones but the distance to the noisy equator and a lack of stations interfering from the N can be a huge advantage for using over-the-pole paths on higher latitudes. The big showstopper is solar activity: Good condx on shortwave can be rather bad for skywave propagation on medium wave, so a solar minimum is the long-term hotspot for (transatlantic) medium wave DX.
I’m glad that I learned how intense that relationship is right away: When I discovered that Bloomberg is pretty good on my indoor YouLoop at home, condx were pretty down with SFI in the low 70s and very little excitement of the auroral zones. 2 weeks later the SFI was only slightly higher in the 80s-100, many of the carriers were missing on the waterfall and Bloomberg could be heard only in much bigger intervals.
Speaking of which – even with favorable condx, a proper radio and a half-proper antenna, patience is key! In my very fresh experience the fading cycles on those over-the-pond signals are long! So far I have seen everything fading in and out over the course of a few minutes to half hours or more, with less favorable conditions or a worse antenna it may take much longer until it sticks out of the noise for a while. So you may have to park on a frequency for a long time to not miss the station coming up so much that it becomes readable at the right time to ID it. Multiple DX stations on the same channel can make identification difficult unless one station really dominates the other and that all may take hours or days until it happens. Here’s a lucky example on 1010 kHz:
Lucky because in this case one station is already known – it’s WINS but it often has another station underneath and I was curious what that station might be. On this occasion, the station ID’d itself as “Newstalk 1010” (which is CFRB in Toronto, 0:05 in the clip) just in a short talking break on WINS. Again, this can’t be heard on my laptop speakers but on headphones:
Waiting for a moment like this to happen isn’t exactly fun, that’s why spectrum recordings are incredibly valuable particularly on MW – you won’t miss a possible station ID on frequency A because you were listening to frequency B, but a part of me thinks this is taking a bit of the challenge away, like blast fishing. 🙂
Fancy equipment
The IC-705 fits snuggly-wuggly into my steering wheel for extra-comfy tuning!
Fun fact: While Bloomberg NY on 1130 was (kind of) booming in at home so I knew for sure it was there, I could hear it even on the XHDAtA D-808 with its tiny loopstick and only average sensitivity on the AM band! So for “easy”, loud and undisturbed stations some persistence and a simple portable radio may suffice to catch some transatlantic DX. But most of the stations will be hit by interference from closer stations, then the radio needs at least to be capable of stable sideband reception, with a corresponding narrow filter and proper suppression of the unwanted sideband – luckily this isn’t an unusual feature on inexpensive portables anymore. So if you already have an SSB capable radio that’s all you need to address the most common issue with transatlantic DX, US and EU stations being too close in frequency. Of course passband tuning and notch filters are most helpful assets in a radio for this, rescuing reception in even more severe interference situations and the spectrum/waterfall display on an SDR helps a lot with finding the carriers and SDRs also have all the nice tools but with some more patience you may find stations with many conventional receivers.
Of course antennas are the crucial component again: If conditions are excellent, even a loopstick may bring the first stations into the log, some small magnetic (wideband) loop could dig up some more stations, from there it’s quickly going a bit esoteric – AFAIK there are no commercial offers for multi-turn (tuned) loop antennas nor are FSL antennas easy to come by, you can’t buy EWE et al antennas either and Beverage antennas for MW are quite a project – not that hard to get a kilometer of wire and there are even kits to buy but it could be much harder to find a place to roll it out in the direction you’re interested in, in an area that doesn’t have electric fences or high voltage power lines within a radius of at least several miles. I guess once you become addicted, you’ll stop asking yourself whether or not it’s worth the effort.
So it’s pretty clear what happened: For catching TA DX stations, the ionospheric conditions must be good, to receive that with a loopstick they must be ideal and that’s what they are currently – it’s winter in what’s still a deep solar minimum and on top of that, some of my radios are very apt for MX DX and I was lucky to listen on the right time on the right frequency. When I started writing this article, my enthusiastic bottom line was supposed to be something like “MW DX isn’t rocket science”, which is certainly true but I think my history with it shows that it’s not exactly trivial either. Maybe that’s why it’s so rewarding, it sure is some hardcore DX challenge that complements the shortwave activity quite nicely and may give you something to look forward to when solar activity is down.
Radio Waves: Stories Making Waves in the World of Radio
Because I keep my ear to the waves, as well as receive many tips from others who do the same, I find myself privy to radio-related stories that might interest SWLing Post readers. To that end: Welcome to the SWLing Post’sRadio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!
Many thanks to SWLing Post contributors Eric McFadden, Mike Terry, for the following tips:
A new study in the research journal Space Weather considers what might happen if a worst-case coronal mass ejection (CME) hit Earth — a “perfect solar storm,” if you will.
In 2014, Bruce Tsurutani of Jet Propulsion Laboratory (JPL) and Gurbax Lakhina of the Indian Institute of Geomagnetism introduced the “perfect CME.” It could create a magnetic storm with intensity up to the saturation limit, a value greater than the Carrington Event of 1859, the researchers said. Many other spaceweather effects would not be limited by saturation effects, however. The interplanetary shock would arrive at Earth within about 12 hours, the shock impingement onto the magnetosphere would create a sudden impulse of around 234 nanoteslas (nT), and the magnetic pulse duration in the magnetosphere would be about 22 seconds. Orbiting satellites would be exposed to “extreme levels of flare and interplanetary CME (ICME) shock-accelerated particle radiation,” they said. The event would follow an initial CME that would “clear the path in front of it, allowing the storm cloud to hit Earth with maximum force.”
The Solar and Heliospheric Observatory (SOHO) has observed CMEs leaving the sun at speeds of up to 3,000 kilometers per second, and many instances of one CME clearing the way for another have been recorded.
The CME’s 12-hour travel time would allow little margin for preparation. The CME would hit Earth’s magnetosphere at 45 times the local speed of sound, and the resulting geomagnetic storm could be as much as twice as strong as the Carrington Event. Power grids, GPS, and other services could experience significant outages.
More recent research led by physicist Dan Welling of the University of Texas at Arlington took a fresh look at Tsurutani and Lakhina’s “perfect CME,” and given improvements in spaceweather modeling, he was able to reach new conclusions.
Welling’s team found that geomagnetic disturbances in response to a perfect CME could be 10 times stronger than Tsurutani and Lakhina had calculated, especially at latitudes above 45 to 50 °. “[Our results] exceed values observed during many past extreme events, including the March 1989 storm that brought down the Hydro-Québec power grid in eastern Canada, the May 1921 railroad storm, and the Carrington Event itself,” Welling summarized.
A key result of the new study is how the CME would distort and compress Earth’s magnetosphere. The strike would push the magnetopause down until it’s only 2 Earth-radii above Earth’s surface. Satellites in Earth orbit would suddenly find themselves exposed to a hail of energetic, and potentially damaging, charged particles.
Other research has indicated that phenomena such as the Carrington Event may not be as rare as once thought. A much weaker magnetic storm brought down the Canadian Hydro?Québec system in 1989.
Scientists believe a perfect CME will happen someday. As Welling et al conclude, “Further exploring and preparing for such extreme activity is important to mitigate spaceweather-related catastrophes.”
In July 2012, NASA and European spacecraft watched an extreme solar storm erupt from the sun and narrowly miss Earth. “If it had hit, we would still be picking up the pieces,” said Daniel Baker of the University of Colorado at a NOAA Space Weather Workshop 2 years later. “It might have been stronger than the Carrington Event itself.”
The FCC has announced that on July 27th an auction will be held for 136 FM construction permits and 4 AM’s. In this auction, the 130 FM permits that were previously included in the March 2020 auction, that had to be canceled due to COVID, will be included plus an additional 6 permits. Anyone who applied for stations in the planned 2020 auction must reapply. All applications for the previous auction have been dismissed.
[…]You can see the FM stations to be auctioned off HERE.
The Commission is proposing a simultaneous multiple-round auction format. This type of auction offers every construction permit for bid at the same time and consists of successive bidding rounds in which qualified bidders may place bids on individual construction permits. Typically, bidding remains open on all construction permits until bidding stops on every construction permit.
A number of months ago I was scanning around the AM dial late in the evening from my Portland, Oregon abode. I stumbled upon a station playing hard rock, which I thought to be an unusual find. As the AM dial has become mostly the domain of conservative and sports talk, I rarely encounter music that isn’t a bumper or part of some leased-time foreign-language programming.
In fact, at first I thought perhaps the music was a lead-in to just another talk show, but eventually I heard a full set of three songs. The station identified itself as “The Bear,” but curiously gave an FM frequency, not one on the AM dial.
An internet search the next day confirmed that “the Bear” is indeed an active rock formatted station located in Merced, California. Its logo features 105.7 FM prominently, with the 1660 AM frequency tucked in the corner. Yet, the AM signal is actually the primary one – the FM is a 250 watt repeater (translator) station.
Here’s a quick aircheck of the Bear’s station ID, during a break in the syndicated hard rock “Loudwire” program.
Now, AM stations have been permitted to get FM translators for a few years now as part of the FCC’s so-called “AM revitalization” initiative. But mostly I’ve heard sports and news/talk stations get repeated on FM.
I filed away this experience in memory, but kind of considered it a one-off. That was until my recent vacation in the Wallowa Mountains of Northeastern Oregon. Stowed away and social distancing in a mountainside cabin with limited internet and no cable, I spent quite a bit of time scanning the AM and shortwave bands in search of interesting sounds. Continue reading at Radio Survivor…
If you’ve thought about attending the annual Winter SWL Fest, but found it difficult to make the travel arrangements, this year you can get a taste of the Fest by attending virtually.
WARNING: due to the graphic nature of these photos, those radio enthusiasts who love the Sony ICF-SW100 may want to look away. Parental Discretion is advised.
Guest Post by Troy Riedel
Some of you may remember my recent lamenting regarding the unexpected loss of my beloved Sony ICF-SW100 posted on this blog. The Medical Examiner opened the radio’s chassis last week. The manner of death is rather obvious, but what caused it? Before I reveal my research, allow me to quicky remind you of the context to the situation.
Due to a medical emergency, I “deployed” for two months to tend a remote farm (one of the few benefits was being able to drive a tractor – a kid from my generation grew-up dreaming of piloting heavy construction equipment and farm implements). I traveled there with two shortwave portables: the Sony ICF-SW100s and the XHDATA D-808. After a long day of work, shortwave radio was my only mode of relaxation during my extended period of solitude.
I had always used Eneloop nickel metal hydride (NiMH or Ni-MH) rechargeable batteries in my SW100. I’m not a physics nor a chemistry major (the closest knowledge I have is enough atmospheric physics to have once been a moderately successful synoptic weather forecaster & aviation weather briefer in the military). As such, my education doesn’t directly correlate so I offer an advance apology for my overly simplistic and layperson synopsis of the specific cause & manner of death of my SW100.
I think we all know that a battery is “energy stored inside of a small container”. And energy is heat – measured by random motion (random motion is directly proportional to heat meaning as motion increases or decreases, the heat generated by the motion will do the same).
NiMH & Lithium battery cells have an alkaline electrolyte, usually potassium hydroxide (potash). The electrolyte serves as the catalyst to make a battery conductive by promoting the movement of ions from the cathode to the anode on charge and in reverse on discharge. The electrolyte is sensitive as it has to be to promote charging & to generate power. And the heat that’s produced by the battery can be dangerous because as we previously discussed, a battery is a “closed” container that stores energy … and if we think about it, so is a bomb, right?
Well, the term closed is slightly misleading and not 100% correct. A rechargeable household battery has a vent which acts as an exhaust. This vent allows excess heat to escape. If you Google image search “NiMH battery anatomy”, there are two ways to vent heat. On Panasonic Eneloops and most commercial household batteries, the vent is the rubber puck (disk) under the positive button tab. This disk seals the internals (thus the term “closed”) while also permitting excess heat to [generally] safely vent. Some manufacturers actually have multiple exhaust openings (holes) around the button top that act as vents. Regardless of how it’s done, these batteries do have an exhaust or venting system.
To summarize thus far, rechargeable batteries vent excess heat (whether generated during use or during charging) from the top of the battery. Venting heat during charging is critical because as well all know, one does not want to overheat batteries during (re)charging. This is why everyone should use a smart charger. A smart charger is one that monitors the energy level of the battery and shuts-off when it reaches capacity (I learned that capacity is defined differently by different manufacturers but all seem to shut-off somewhere at 90% or greater). I remember the portables that were released maybe 10-15 years ago that introduced charging inside the radio. The very early models were not smart, the user had to either program how many hours you wished to charge the battery/batteries or the radio itself was programmed to charge for x-amount of hours regardless of whether the batteries needed to be charged for that long (you could very easily continue charging for hours after the battery attained 100% capacity – a very dangerous situation for your valuable radio!). Thankfully most newer radios, except the inexpensive “no-frills” radios, have smart changing technology. Regardless, I have never been a fan of using my radio to charge batteries as I’ve always felt this is too dangerous because the process produces heat and I do not want [excess] heat generated (or vented) inside of my radio!
There are typically more shipping restrictions, more transportation restrictions with Lithium batteries than there are for NiMH batteries (I’m sure most people have noticed shipping restrictions when buying electronics regarding the shipment of Lithium batteries – and if shipment is allowed, it’ll cost more to ship because Lithium batteries cannot be shipped via all modes). Lithium (3.7v) & NiMH (1.2v) batteries are essentially the same technology, except Lithium generates more “power” aka “more heat” (3x the voltage) and are thus much more sensitive to heat (including environmental heat) .
In doing my research, I found a slight conflict regarding the stability of NiMH batteries in storage. Some manufacturers warn that NiMH batteries should not be stored in temperatures over 30C (86F) while others list 40C (104F) as the threshold. What happens above this threshold? The electrolyte catalyst is activated, and the battery will generate its own heat (heat that must be vented).
At this point, I’m sure you can see where this is going. I had two NiMH batteries inside of my SW100. The two stacked batteries increased the inherent risk (in a worst-case situation, two batteries would create & release/vent more heat than a single battery). I was in a hot environment, I lacked air conditioning for most of the time, and I had a long drive of nearly 300-miles to/from my location at the start & the end of the two months I was there. My SW100 was apparently put into peril when it encountered environmental [ambient] temperatures that exceeded the Eneloops threshold (30C? 40C?). And this caused the NiMH Eneloops to heat-up beyond normal, vent the excess heat, and thus “melt” part of the PCB and the back case of the SW100.
This did not happen during normal storage of my radio in my temperature-controlled house, but rather it happened in the adverse environment I temporarily subjected the radio to.
Yes, I know … think what you want (but please don’t say it). User error. I should have known better. It was my fault. It was dumb. Yes, yes, yes & yes answer those four statements. I know, I know …
There are three positives to this:
(1) I learned a painful albeit valuable lesson;
(2) Maybe others can learn from my folly; and
(3) Parts to maintain these classics must be salvaged. I donated my radio (including the AC adapter) – it’s not a total loss and it still has value as a “parts radio”. My SW100 is now in the hands of a skilled, master technician who might be able to save the life of another (or multiple) SW100 radio(s).
My loss just might be someone else’s gain? I take comfort that my radio may live on (as an organ donor) to potentially provide years of enjoyment for someone else.
I have picked-up a few of my other shortwave radios since my initial post (PL-390, PL-880, XHDATA D-808, Satellit 750) & I have started listening again.
And I did have surgery a couple of weeks ago for the physical injury I sustained while tending the farm (my ICF-SW100 wasn’t the only casualty during this period of time). After a frustrating 2+ weeks, I’m starting to make progress with my physical healing. And now that I have a definitive answer on the manner & cause of death of my SW100, I’m psychologically healing from that as well.
UPDATE after my initial post:
I neglected to make the following statement: one can debate whether the excessive heat being vented caused the PCB & case to melt, or if the vent(s) in one or both batteries failed, or if the battery heated-up too quickly & too much for it to safely vent? The only thing I do know: the batteries exhibit no physical damage or defect so the exact mechanism of the the excessive heat will remain unknown.
Many thanks to SWLing Post contributor, Michael Sharpe, who writes:
Hi Thomas,
Here are some personal observations after playing with the Tecsun PL-330 for a couple weeks, maybe an hour or two a day. I made a point of picking up the 310ET , the CCrane Skywave SSB and the G6 Aviator at the same time for some comparisons.
These comments are in no particular order.
The PL330 is very lightweight compared to the other three. This could be perceived in two ways.
A. The case seems less sturdy than it could be, it creaks and ‘gives’ a little when operating some of the controls that require ‘squeezing’ to activate a button. I would prefer a more solid feel.
B. The radio is very light which is a plus for travelling with hand luggage. You’ll like that 🙂
The backlight can be set to permanently ‘on’, I really like this. None of the other radios do this when on battery power only. I don’t consider any radio ‘portable’ if it is tethered to a power supply. It would be nice if the buttons lit up but let’s stay real here !
Tuning: I am not crazy about the detented operation of the tuning knob, but I recognise that this is a requirement on the lower cost portables that use digital tuning. However…the PL-330 scores highly because the detent clicking is soft and silent. When compared to the Skywave SSB, there is a world of difference. For me, a clicking knob eliminates the option to tune around the ham bands when my wife is trying to sleep. I did email CCrane to ask if a solution may be suggested, but the response was negative. The G6 Aviator wins hands down in this area, but apples to pears !
Memory Tuning: I really like the options here, easy to use and the time selective ETM+ is genius. I also like the easy ‘delete all memories’ option which enables a fresh start at any time.
Audio: It’s not a PL-880 but its Ok for a small portable and the bandwidth option is a big plus. I’m no expert here because I do a fair proportion of my listening with a mono single side earpiece at night.
AM: Seems to work fine. Pulls in everything I normally listen to and seems sensitive and stable enough.
FM: Seems to work fine. Pulls in everything I normally listen to (not much!) and seems sensitive enough. Brilliant that it will suppress stereo unless the headphone socket is used.
SW: I spend a lot of time here and it seems good enough. I did compare reception with the Belka DX and had nothing to complain about. I have learned that keyboard tuning to a frequency near the frequency of interest and then final tuning with the annoying detent knob is the way to go. Also, memory tuning is easy and makes the detent truly functional.
SSB: This my main area of interest as I love to tune around the ham bands, especially when travelling with no access to real ham gear. The fine tuning at 10 Hz with suppressed soft muting is a real winner. It would be nice if soft mute could be disabled completely but I understand this is limitation of the DSP hardware.
Calibration seems easy too with just a long press on the USB button when the audio is zero beat (note the calibration option is for the AM band but utilizes the USB or LSB to zero beat and set). I don’t do this any more, after all, what’s the point when tuning around to listen 🙂 Just twiddle the knob until it sounds good and Bob’s your uncle. I think the ‘Step’ button should replace the ‘Sync’ button and not be shared with the sunken ‘lock’ button. Too squeezy.
SYNC: Don’t bother. I tried it several times, not so much any more. Waste of a perfectly good button. (See SSB above.)
Battery: I actually like the battery choice. I get that AA’s or AAA’s are a good choice for emergency use because of availability but in an emergency you would probably have your phone with you, and some means of charging it. Just have an appropriate cable or adapter in the bag and you are good to go. My current phone uses the usb micro, as does the PL330 so I may be a little biased at this time.
Antenna: For portable use, the existing antennas work fine. The SW input jack works and the ability to switch the AM signal source between the internal ferrite and the external jack is a nice touch if you want to experiment.
I cut the wrist strap off, not sure what benefit this offers but they all have them. I must be missing something ?
A rear stand would be nice but it stands on its base reasonably well.
So….for around $60, it’s a no-brainer in my book.
Hope this helps. I’m no expert when it comes to deviation ratios, 3rd order intercepts, microvolt sensitivity etc. etc. but these are my impressions from a guy who just likes to play with radios.
Best wishes
Michael (N9YZM)
Thank you for sharing your impressions of the Tecsun PL-330, Michael! I’ve also been testing the PL-330 and find that it is a great value for $60–certainly a low-cost alternative to the C.Crane CC Skywave SSB (although I much prefer the build quality of the Skywave). My family life has been so busy this past month, I’ve had little dedicated time to do comparisons, but it appears to me that the PL-330 is a solid performer.
Thanks again for sharing your assessment, Michael!
