Tag Archives: Dayton Hamvention

Jerry’s flea market and estate sale radios

SWLing Post reader, Jerry (WW0E) writes:

“Sorry I missed your table at Dayton. Managed to add 4 old 1940’s 1950’s era broadcast band radios to my collection, had a great time. [Here is a] picture of my 1938 Wards dial tone with tuning eye, $35.00.”

Jerry continues:

“Found this GE-P780 at an estate sale last weekend $20.00, fantastic working condition!”

“Recently purchased this Philco console, 1938, with the Philco ‘cone-centric tuning dial system.'”

Many thanks, Jerry, for sharing these excellent finds! If I had a bigger house, I would certainly fill it with 1930’s era console radios!

Spread the radio love

Tallying up Dayton Hamvention purchases

10 Replies

It have a hard time passing up old military gear, like this Signal Corps BC-221-AL signal generator.

I’m a sucker for old military gear, like this Signal Corps BC-221-AL signal generator. (Click to enlarge)

This year, at the Dayton Hamvention, I spent more money than I ever have. Though the Hamvention is a showcase of innovations and flea market treasures, I typically walk away with a few connectors, cables, or maybe some handy accessories; I rarely spend more than $100, though I budget much more.

But this year was an exception. I walked away with a few bigger-ticket items I found irresistible. Buyer’s remorse? Nope.

SWLing Post reader, Mike, asked what I purchased, so instead of sending him an email with the tally, I thought I’d post my finds here.

Hallicrafters SX-24

I already have an SX-24, but this one is cosmetically superb for its age. The seller told me that she “lights up” but has no audio; it was an estate sale item. I assume that it has a bad capacitor or two (or more). No doubt, it can be fixed and will fill my radio room with warm audio in due time. At least, that’s the theory!

I purchased this Hallicrafters SX-24 for $60.00

Signal Corps BC-221-AL Signal Generator

This is a working BC-221-AL signal generator that will more than pay for itself each time I align my BC-348-Q (or any of my boat anchors, for that matter). It, too, was in excellent shape and I couldn’t pass it up at $30.00 (great price as the seller was ready to part with it on the final day of the Hamvention). I love the fact that its reference book and log, with schematic, are fully in tact. Bonus: it has that great vintage military electronics smell.

Surmen DC Digital Voltmeter

I picked up this simple in-line volt meter at Universal Radio for $20.

The photo above is enlarged: the actual unit is very small (2.75 x 1.5 x 1 inches). Since my whole DC system is based on Anderson Powerpole connectors, this simple meter will help keep tabs on voltage. I think Universal sold out of these at the Hamvention, but since they build them in house, you can order online.

Side KX panels and cover

I like traveling with my Elecraft KX3, but I worry about the faceplate being damaged in transit. In the past, I’ve used dense foam to protect the front of the radio, but it’s an imperfect solution.

This year, Gems Products was selling their Side KX panels at Elecraft‘s booth in the North Hall. The Side KX handles protrude a good 1/8″ beyond the height of the KX3’s knobs, thus protecting the rig even if turned upside down. I also purchased the clear Lexan cover which fits perfectly on the radio. Now when I travel, I can throw the KX3 in my backpack and not worry about the face being damaged.

At a Hamvention discounted price of $60 with tax, it was no minor purchase, but the investment to protect a $1,200 portable radio was well worth it. I must say, the fit is excellent and installation took perhaps 5 minutes.

Sony TFM-1600W portable radio

This Sony was a late Saturday flea market purchase. The vendor–who attends annually and is well known for his gorgeous display of antique tube radios–had this solid-state Sony sitting at the back corner of the booth. It quickly attracted my attention and that of my buddy (and radio enabler) Mike (K8RAT).

Originally priced at $65.00, the vendor was kind enough to let me talk him down (“beg” is more like it, right Mike?) to the $40.00 cash I had left in my pocket.

Once we got it back to our lodging we confirmed what we had suspected: this Sony has incredible audio fidelity and great sensitivity. No big surprise here: in the 1970’s, Sony was a brand well-known for superb audio fidelity.

This Sony will need a little work–the pots and band switch need a thorough cleaning. Also, the tuning needle somehow came dis-lodged from the fly-wheel mechanism. All of these things can be fixed, though, and I’ll have a superb receiver that should last a few more decades. For a radio built in Japan in 1971, I’m very happy with its condition.

Palstar SP30B Speaker

I’m a sucker for hand-crafted gear. While perusing the flea market, I looked for an affordable vintage speaker for my BC-348-Q, but I couldn’t find one. Inside, however, I spotted this beautiful speaker at Palstar’s booth in the East Hall. I’ve owned a Palstar R30C shortwave receiver before and know how much they care about audio fidelity and overall quality. The SP30B was originally designed for the R30 series receiver.

The wood speaker cabinet on the SP30B is built by a wood worker exclusively for Palstar; the finish is amazing.

The SP30B retails for $99.95 at Palstar.com. I was able to snag this one for only $75 as it was a display and Palstar’s last one with cherry finish.

Miscellaneous items

I purchased a few additional accessories and supplies:

Icom ID-51a BP-272Li extra capacity battery from Batteries America: $52.00
75 feet of coaxial cable: $70
8 blemished PowerFilm solar plates: $5

There may have been more items, but I’m calling this a total Hamvention expenditure of $412.

Did you attend the Dayton Hamvention? How much damage did it do to your wallet?

Spread the radio love

Last day of the 2014 Hamvention

1 Reply

Today is the the final day of the 2014 Dayton Hamvention. For exhibitors, it’s the slowest day of the weekend (Saturday is the busiest).

My voice is hoarse from speaking with so many people–it’s been great! Many thanks to the SWLing Post readers who stopped by our booth to talk radio.

This morning, I’m listening Pacific Break on Radio Australia with my buddy Eric McFadden while we eat breakfast and prepare to leave. I started listening to RA on my Tecsun PL-310ET and Eric (of course) brought out his Sony ICF-SW7600G and AN-LP1 for comparison. A little radio fun before the craziness yet to come.

We’re not staying in a hotel this year, and we have much quieter conditions for SWLing. Eric, as a I mentioned in a previous post, is retired from the Ohio Air National Guard; this year, he was fortunate enough to secure us a “TLF” (Temporary Lodging, Family) on Wright Patterson Air Force Base. Our TLF is a three bedroom, 2.5 bathroom house with a living room, laundry room, outdoor patio, yard and is surrounded by acres of green space. It’s about half the price of a local hotel, so we feel most grateful! Better yet, a TLF is like being at home: we can string up antennas indoors or outside and play radio.

Eric eating cereal and doing an informal A/B comparison. The AN-LP1 is attached to the dining room window.

Many thanks to Eric (WD8RIF) and his son, Miles (KD8KNC), for being such dedicated ETOW volunteers.

As I head out this morning, I thought I’d post a few more photos I took yesterday:

Though I wouldn’t have a clue how to operate this Collins 10B (above), I would love for it to adorn my radio table.

I’ve also taken photos of new products vendors displayed at the Hamvention. I plan to post them after returning home later this week.

If you’re visiting the Hamvention today, please stop by Booth BA411 and introduce yourself!

Spread the radio love

Dayton Hamvention flea market: a few photos

2 Replies

I had a little over one hour to check out the Dayton Hamvention flea market yesterday morning before manning our inside exhibitor’s table for Ears To Our World.

Here are a few radios that caught my attention:

I actually purchased the Hallicrafters SX-24 in this photo (above) for $60. I would have purchased the speaker as well but he wanted $200 (!!!) for it.

By the time I made it back to this Hammarlund HQ 145 A, someone else had already snagged it. It was a beauty!

I probably saw eight of these RA6790/GM’s scattered throughout the flea market.

Spread the radio love

Going to the Dayton Hamvention? Stop by our booth!

Looking forward to the 2014 Dayton Hamvention and FDIM

4 Replies

Each year, I attend the Dayton Hamvention and much of the QRP conference, Four Days in May. This year, I’ll be working our Ears To Our World table again, along with other volunteers, at booth 411 in the Ball Arena (BA411). Please stop by and introduce yourself!

What I love about the Hamvention (besides the massive outdoor flea market) is that it is a one-stop-shop for innovations appearing in our radio world.

Here are a few of the companies I’ll be following at the Hamvention this year:

Ten-Tec

Ten-Tec announced yesterday that it will merge with Alpha Amplifiers under the flag of RF Concepts. I plan to stop by Ten-Tec’s booth Friday and learn more about the merger. Personally, I believe the merger with Alpha Amplifiers is a good move. Both of these companies are known for great customer service and quality US-based design and manufacturing.

I know Ten-Tec is introducing a new open-source product to their line, the Patriot, because I’ve been beta testing one (check QRPer.com for details later this week).

Icom

Icom will showcase their new ID-5100 D-star, dual band, mobile with built-in GPS. While I’m more of an HF guy, this radio does intrigue me. You see, for almost one year now, I’ve been very pleased with my Icom ID-51A, dual-band, D-Star handie talkie (HT).

I find D-Star to be a very flexible digital mode and I’m amazed with how many interesting mom-and-pop companies have produced products for the D-Star mode. I’m surprised neither Yaesu nor Kenwood has adopted the D-Star standard (it’s not proprietary to Icom–indeed, read about the CS7000 below).

The new ID-5100 is a mobile version of my ID-51a. What I love about this radio is that it can store repeater frequencies and dynamically load them based on your geographic location. Perhaps my largest gripe with mobile VHF/UHF rigs is their inability to adapt to the repeater “landscape” when you travel. The ID-5100 may change this and push other manufacturers in the same direction.

Connect Systems

In less than a year, Connect Systems has become a household name among ham radio enthusiasts who love VHF/UHF and digital modes.

This Connect Systems is developing an HT–the CS7000–which will be the first non-Icom radio to have the D-Star digital mode. Whatsmore, in addition to D-Star, the CS7000 will also pack DMR.

I don’t think Connect Systems will have a working prototype at the Hamvention (I could be wrong), but there is a possibility that they will be taking early orders.

Elad

I’ve been intrigued by the Elad line of Software Defined Recievers. This year, they will attend the Dayton Hamvention. I look forward to checking out the new FDM-DUO tabletop SDR. I plan to review some of the Elad product line in the near future.

Palstar

Last year, Palstar showcased a prototype QRP transceiver with touch screen interface. To my knowledge, this would be Palstar’s first transceiver (though they’re well known for antenna tuners and their shortwave radio receiver, the R30A).

Last year, I was told that the new Palstar transceiver would be available this year and would retail between $1,600 – 2,000 US (a rather steep price for a transceiver with 20 watts output). One of the transceiver’s designers assured me that the receiver would “be worth the price.”

Bonito

I’ll stop by Bonito’s booth to check out their new AntennaJet ASM300. I’m curious how it works and what the Hamvention price will be.

Though pricing is a little steep, I might bring one home as I often would like to share one antenna with two receivers simultaneously.

Elecraft

The only new product I know of from Elecraft is the PX3 Panadapter for their Kx3 transceiver. Reviews of the larger P3 Panadapter for the Elecraft K3 are excellent, so I imagine this will be a great product. I hope to check out the PX3 at the Elecraft booth–I believe they’ll have a prototype on display.

SDRs

For the past three years, the market for software defined radios has been growing rapidly. I’ll be on the lookout for anything new–especially improvements on current 3rd generation SDRs.