Tag Archives: Guest Posts

Guest Post: Mark explores a 1983 Voice of America information pack

Many thanks to SWLing Post contributor, Mark Hirst, who shares the following guest post:


VOA Information Pack 1983

by Mark Hirst

Introduction

A recent guest post on this blog by Jock Elliott asked the question, ‘Why Listen to Shortwave?’

The comment I left at the time was my interest in how nations view themselves, and how they project that view to the world. This might be in the form of cultural exports like music, or teaching us about famous people or revered institutions in their country.

When I first started listening to shortwave in the early eighties, I never got into the habit of asking for QSL cards, being quite thrilled enough to receive programme guides in envelopes stamped with the postmark of other countries.

At the time, the primary stations for me included Radio Netherlands, Radio Sweden, Swiss Radio International, and the Voice of America. While most might send a small leaflet about their country with a frequency schedule, the information pack I received from the Voice of America stands head and shoulders above the others.

I thought readers might be interested in a brief description of this pack and with it a glimpse back into the world of 1983.

Please note that as you read the following sections, you can click on the images to view a larger version.

Package Contents

The package arrived in a manila envelope, with the logo and address of the VOA printed in the top left corner. In the top right corner is the logo of US Mail, with a declaration that postage and fees where paid for by the US Information Agency.

Package contents included:

  • Compliments Card
  • VOA Sticker
  • Steering the Course Magazine
  • VOA Magazine
  • May-October 1983 Programme Schedule

VOA – The Voice of America

This guide begins by outlining the mission of the VOA, emphasising its aim to be an authoritative and reliable source of news. Continue reading

Spread the radio love

Guest Post: Comparing the Reuter Pocket and the Icom IC-705 from an SWL’s perspective

Many thanks to SWLing Post contributor, Uli (DK5ZU), who shares the following guest post:


SWL with a Reuter Pocket and the Icom IC-705

by Uli (DK5ZU)

Some time ago I asked how the IC-705 performs on longwave and I got some great feedback. Thanks a lot again. Since the HAM bug bit me again, I wanted to do SWL and HAM Radio portable with one rig. I started with SWL some weeks ago (just before the bug bit). I acquired a second hand Reuter Pocket RDR 51 Version B2. It is a standalone SDR Receiver 0 … 30 MHz / 50 ..71 MHz, and in my B2 version it has also FM (Stereo/RDS) and Digital Audio Broadcasting (DAB). You may find the detailed specs here:
https://www.reuter-elektronik.com/html/pocket.html

The Reuter Pocket could, at one point, be configured as an QRP Transceiver, but it is no longer supported. There is a new RDR 52 small tabletop models, which can be ordered as a transceiver, too. But due to Covid related supply chain problems and price changes for the components, the new model is currently postponed.

The IC-705 is available, though. And for portable HAM operations it is a no brainer; obviously with a high price tag, but comparable with a new Reuter RDR 52 tabletop. And since my budget for the hobby is limited, I thought about funding part of the IC-705 price by selling the Reuter Pocket. But I wanted to do a side-by-side comparison so I ordered the 705 and was able to check them both on one antenna. The goal was to compare their sensitivity and selectivity on the lower bands: BC on AM and HAM bands for SSB. I did not compare CW since I am not a CW operator.

The antenna is a MiniWhip from PA0RDT which works quite well on the lower bands.

This comparison is not at all scientific and reflects just my opinion and what I heard. But anyway, there may be some people out there interested in this. So much for the intro.

Let’s start with my overall findings. Continue reading

Spread the radio love

Guest Post: Crystal Radios – Construction, Listening, and Contesting

Many thanks to SWLing Post contributor, David Day (N1DAY), for sharing the following guest post:


Crystal Radios – Construction, Listening, and Contesting

By David Day – N1DAY

The date was November 2, 1920 and the world was about to change forever when radio station KDKA out of Pittsburgh PA made its first broadcast of election results from the 1920 presidential election.  For the first time in history people knew who won the election before reading about it the next day in the newspaper.  Radio had arrived!

However, hearing the election results was not as easy as powering up an AM radio receiver because radio electron tubes had only been invented a few years earlier and they were still too expensive for most people to afford in a radio set.  After KDKA’s historic broadcast, large 50,000 watt stations began popping up in all major cities around the world.  Even though a tube-driven radio was not yet commonplace, many people listened to these stations on their crystal radios.  The frenzy around radio in the 1920’s was not unlike the excitement around cell phones and the internet today.  If you didn’t have one, you were simply living in the past.

A family listening to a crystal radio in the 1920’s

Fortunately, in the early 1920’s the crystal radio had been around for a while and it was easy to make or purchase a completed set on a limited budget.  The beauty of the radio was that it was a passive device needing no power source other than the radio station’s broadcast that was received by a good antenna about 50 feet long and 15 or so feet above the ground.  Crystal radios derived their name from use of galena crystals as detectors. Continue reading

Spread the radio love

Guest Post: An Introduction to DXing the MF Marine Bands

Many thanks to SWLing Post contributor, Don Moore–author of  Following Ghosts in Northern Peru–for the following guest post:


Monitoring the MF Marine Bands

By Don Moore

For me, DXing has always been about the challenge of receiving difficult-to-hear radio stations, regardless of the type of station or frequency range. In my five decades in the radio hobby I’ve logged a lot of different kinds of stations – shortwave broadcast, medium wave, shortwave utility, longwave beacons, etc. But some of my favorite catches have been in the upper end of the medium frequency range.

Technically speaking, medium frequency (MF) is the range from 300 to 3000 kHz and includes the standard medium wave (AM) broadcast band. The upper end of the MF band, from 1600 to 3000 kHz (except for a small portion reserved for amateur radio),  has always been assigned to various types of utility uses including broadcasts and other voice communications from regional maritime stations. And while digital modes and satellites have done a lot to change the nature of communication with ships at sea, there is still a lot of good human-voice DX to be heard.

Several dozen stations, mostly in Europe and North America, broadcast regularly scheduled marine information broadcasts in the MF range. These broadcasts are usually between five to ten minutes in length and include weather forecasts, navigational warnings, and other notices to keep ships at sea safe. On occasion it’s possible to hear two-way voice communication here between ships and shore stations, although that’s much less common today.

The Equipment

Nothing special is needed to DX the marine MF band other than a receiver that covers the frequency range and can receive USB mode (which all these broadcasts are in). However, for reasons explained below, I highly recommend using an SDR to make spectrum recordings of the entire band to go through later. Continue reading

Spread the radio love

Airspy HF+ Discovery & Shortwave Portables: Having Fun with the Airspy YouLoop!

Many thanks to SWLing Post contributor, Bill Hemphill, who shares the following guest post:


YouLoop Antenna Fun

by Billy Hemphill WD9EQD

Like many listeners, I live in an antenna restricted community.  While I have strung up some hidden outdoor wire antennas, I have found that they didn’t really perform that much better than just using the telescoping antenna with maybe a length of wire attached.  The biggest problem (whether indoor or outdoor antenna) has been the high noise floor.

A few months ago I bought an AirSpy HF+ Discovery SDR receiver.  I had already owned a couple of SDRPlay SDR receivers, but the high noise floor limited their performance.  I had read good reviews about the AirSpy, especially its performance on the AM Broadcast band and the lower shortwave bands.

I have about 80 feet of speaker wire strung from the second floor and across the high windows in the living room.  This does perform fairly well, but the high noise floor still exists.

A couple of weeks ago, I bought the YouLoop Magnetic Loop antenna from AirSpy.  I gave it a try and am amazed at the lower noise floor compared to the indoor wire antenna.

Wire Antenna vs. YouLoop–some examples:

AirSpy with Wire Antenna

AirSpy with YouLoop

AirSpy with Wire Antenna

AirSpy with YouLoop

AirSpy with Wire Antenna

AirSpy with YouLoop

Dramatic reduction in the noise floor.  I’ve done a lot of playing around with it and find that the YouLoop picks up just about the same stations as the indoor wire antenna does.  But with the lower noise level, the YouLoop makes it more enjoyable to listen.  Overall, the YouLoop is now my main antenna.

YouLoop with a Portable Radio

It works so well with the AirSpy, I started wondering if I could use it with a portable radio, like the Tecsun PL-880.  But the AirSpy website has the following note:

Note: It is very likely your third party radio will not be sensitive enough to operate with the YouLoop properly. We have even seen self-documented failed attempts to build pre-amplifiers to compensate for the lack of sensitivity and/or the required dynamic range in third party radios. Use your brain, and eventually an Airspy HF+ Discovery.

Doesn’t sound like it will work with portable radios.  BUT, I’m always one to try anyway.

Tecsun PL-880

Since the YouLoop has a SMA connector, I bought a SMA to 1/8” phone jack cable.  Plugged it into the PL-880 antenna jack and found I had almost a dead radio.  Very few stations heard.  But in playing around, I accidentally touched the phone plug to the telescoping antenna and instantly got strong signals.

I did some very unscientific tests.  I attached the YouLoop through the side antenna jack, did an ATS scan, then did the same with the YouLoop clipped to the telescoping antenna.  Also did a scan with just the telescoping antenna fully extended..  I got some very interesting results.  These were done one after the other, so there can be differences in signal fading, etc.

I have repeated the above test several times at different hours.  While the actual number of ATS stations varied, the ratio between them remained fairly consistent to the above numbers.

From the above, it appears that the telescoping antenna circuit is more sensitive than the 1/8” antenna jack circuit.  Maybe some attenuation is being added to the 1/8” jack since it’s more likely a higher gain antenna would be used there.  Can anyone confirm that the circuit indeed attenuates thru the antenna jack?

The YouLoop seems to be a decent performer when directly clipped to the telescoping antenna.  While not as good as a high gain outdoor antenna would be, it definitely is usable for indoor uses.

I also tested it clipped to the antennas of some other portable receivers. Tecsun S-8800, PL-330, Panasonic RF-2200 and Philco T-9 Trans-World receivers.  All showed an increase over just using the telescoping antenna.

Some interesting notes:

The Tecsun PL-330 saw the same reduction in signal when directly plugged into the antenna jack as opposed to clipping on the telescoping antenna.

The Tecsun S-8800 did not show that much of a drop.  I basically got the same number of stations when clipped to antenna as when I connected to the BNC jack:

In conclusion, I find that I can use the YouLoop with my portable radios to increase the signals on strong stations when used indoors.  And it is quite the performer when used with the AirSpy HF+ Discovery SDR receiver.  It easily portable and I find that I move it around the house as I need to.  I just hang it off a window curtain rod.  I may just order a second one so that my family room radio has one permanently attached to it.

Click here to check out the Youloop at Airspy.com.

Spread the radio love

Guest Post: Pavel’s Homebrew “Monster” Drain Pipe FSL Antenna


Many thanks to SWLing Post contributor, Pavel Kraus, for the following guest post:


Building a Drain Pipe FSL Antenna

by Pavel Kraus

Hi, I greet all DX fans and the entire SWLing Post community! I enjoy reading reading this blog and the diversity of contributions from our authors and contributors; many thanks from me for so much useful information.

The following are the construction notes of my FSL antenna, which I designed thanks to the suggestions of GaryDeBock, and other FSL designers.

The antenna is a classic design featuring 60 ferrite rods 200x 10 mm, which are placed on a plastic sewage pipe.

Pict 3: Pipe with ferrite rods and windings

Pict 4: Pipe with ferrite rods and windings

In addition, sewer pipe sections are used for the entire antenna cover. I assume that this material can be obtained in other countries as well. Continue reading

Spread the radio love

AGA Nostalgia Trip: Haluk soon to be reunited with his childhood radio

Many thanks to SWLing Post contributor, Haluk Mesci, who shares the following guest post:


AGA is the agha of radios…

by Haluk Mesci

Full disclosure: Contains nostalgia of ‘my parent’s radio’ and some 36 ‘and’s…

I was born and raised in Turkey. Throughout some part of my primary and secondary school years–between 1960 to 1968–we enjoyed listening to an AGA tube radio in the family room.

Although AGA is mainly Swedish as far as I know, I re-discovered a stock photo of it on agamuseum.nl which is Dutch:

Ours had a ‘magic eye’ just above the tuning knob on the right

I remember, at age 9, trying to listen to a live broadcast of a soccer match between Fenerbahce–my favorite team–and the French team of Nice: There was a ‘Nis’ -Turkish spelling- on the MW screen, so there had to be a broadcast, right?  Wrong.

I learned much later that it wasn’t that easy on radio. (Alas, my team was devastated 5-1 anyhow.) Similar ‘search’ for ‘Russian Sputnik sending messages to the world’ yielded nothing but strange sounds like ‘a diesel engine working loudly’… I wasn’t a silly kid, but nobody taught us basic radio then.

Years passed and my family relocated to Samsun, another city by the Black Sea, because of my father’s work. I was about to graduate from ODTU and there was the famous leftist (anti-US etc) ‘boycott’s of 1968 and later, I had to go live with my parents while my  university courses remained suspended.

Ironically, the city had a US radar base; the base had a low power MW radio station broadcasting news and music -rock and country etc- 24 hours in English to the base staff: AFRTS 1590 kHz.

Shortly thereafter, the base was closed and the radio station went off the air, maybe because of the boycotts and the political winds in Turkey, so I had to look up another such station. Continue reading

Spread the radio love