Tag Archives: Vintage Radio

A carpenter “who carves vintage radio sets”

Many thanks to SWLing Post contributor, Kim Elliott, who shares the following story from the Odisha Sun Times:

Bhubaneswar: Only a lucky few get to live and breathe their passion and Rajendra Sahu, a carpenter, is one of them.

From Odisha’s capital city of Bhubaneswar, Sahu steals time to give shape to his imagination. He has been carving radios of varied shapes and sizes since past decade-and-half.

“I make radios just because it makes me happy. I return from work by 7 pm and start with the daily ritual of making radio,” said Rajendra. He prepares the cabinet with plywood, sunmica and cane whereas the circuit board is affixed from discarded ones.

“It takes around five days to assemble a radio. I browse through online sites looking for designs,” said Rajendra, who also collects antique radio sets from various parts of Odisha.

“I grew up listening to the radio. There’s a charm to it that the gadgets today fail to deliver. My father too was very fond of them. He would make radios, but I learnt to make them by myself,” he added.[…]

Continue reading the full story at the Odisha Sun Times.

Spread the radio love

Doctor Vlado repairs the Panasonic RF-2200 (Part 1)

33 Replies

Last year, at Hamvention, I picked up a Panasonic RF-2200 for $70. It came with the original box, manual and was in superb cosmetic condition.

The seller told me that over the years he exclusively used the radio to listen to a local FM station.

At that price, I didn’t hesitate to make the purchase even if this would have simply been a non-functioning parts radio for my other RF-2200.

After I brought the radio home, I unpacked it and gave it a quick test.

FM worked brilliantly. Mediumwave and shortwave, however, were essentially deaf. I made the assumption that the ‘2200’s switches and pots likely needed cleaning with DeoxIT. The next day, I was leaving for a two month trip to Canada though, so I packed the RF-2200 back into its box and set it to the side of my shack table.

Fast-forward to yesterday…

While digging around my shack, I re-discovered the boxed RF-2200. Since I was planning to visit my buddy Vlado (the best radio repair guy in the world) yesterday evening, I thought I’d take the RF-2200 and do a proper contact cleaning. Several of the RF-2200’s switches and pots cannot be easily cleaned without removing the chassis.

(Click photos to enlarge.)

Vlado is familiar with the RF-2200 and since it’s not the easiest radio to work on, I asked for his expert hands on the job. Within seconds of handing him the radio, he plugged it in, tested the switches and pots, then removed the back cover (disconnecting the battery compartment leads) and then the front cover (disconnecting the speaker leads).

The magic behind the RF-2200’s classic analog dial:
Vlado offered a word of caution to anyone operating on their RF-2200: as you can see in the photo below, the dial string snakes around the front of the radio and is very close to some key components. You must exercise caution when having a soldering iron tip near the string, or using lubricants nearby.I didn’t realize this, but by the time Vlado started taking apart the RF-2200, he had already determined that even though the contacts needed cleaning, this wasn’t the source of the audio problem for the MW and SW bands.Vlado expertly pulled out the pot for the FM/AM/SW selection–not an easy task–began cleaning it, testing it and re-soldering contacts.

Vlado determined the pot was actually in good shape, thus started testing the rest of the circuit.

After a few minutes of performing tests and getting intermittent performance, he determined that at least one, if not more, of the RF-2200’s caps need to be replaced. Of course, neither one of us was terribly surprised. At this point though, it was getting late and I had an early wake up time in the morning, so I left my RF-2200 with Vlado.

Am I worried about this prognosis? No, not in the slightest…

Doctor Vlado is on the job!

Vlado will have the RF-2200 back on the air in no time, working as well as it did when it was new. He’s actually performed a similar RF-2200 repair for an SWLing Post reader and I’m willing to bet this repair job is relatively simple compared to most he encounters (including the Icom IC-7200 he recently repaired after it was hit by lightening!).

I’ll try to post a “Part 2” update with photos of the RF-2200 repair. Follow the tag: Panasonic RF-2200 Repair

Spread the radio love

Can you ID this radio in “Diamonds Are Forever”–?

15 Replies

Many thanks to SWLing Post contributor, Chris, who writes:

Last weekend, I watched a few old James Bond movies and this caught my attention when Blofeld was listening to a shortwave broadcast:

Can anyone identify this radio?

Post readers: Please comment if you can ID this radio model!

Spread the radio love

Dan spots shortwave radios in the film “Operation Chromite”

Dan spots an Icom IC-R71A in Narcos

1 Reply

Many thanks to SWLing Post contributor, Dan Robinson, who writes:

I like to note appearances by shortwave receivers in TV programs…here’s the latest…at the 14 minute mark of the new season of NARCOS (one of the best TV series there is by the way) a ICOM IC-R71A makes an appearance. At the point in the show, a key character is listening to reel-to-reel tapes, so it’s not quite clear why they stuck in a 71A tuning to a shortwave frequency….ah, the drama! Another show, The Americans, features numerous shots of various receivers, including Zenith Transoceanics and Hallicrafters…

Great catch, Dan–thank you for sharing! I’ll add this find to our growing archive of radios in film.

Spread the radio love

A photo tour of the 2018 Greenwood, SC hamfest

4 Replies

Last week, my buddy Vlado (N3CZ) informed me about a small hamfest in Greenwood, SC–I had never attended, but had heard positive comments about it.

I believe Vlado was somewhat on the fence about going, but once I expressed a strong interest in selling some gear, he did too so it quickly became a plan!

Greenwood, South Carolina, is about a 2.5 hour one-way drive from my home. Vendors were encouraged to arrive around 7:00 to set up (general public admission was at 9:00), so Vlado and I hit the road by 4:30 AM!

Notice the lack of traffic on the interstate at 4:30 AM!

We arrived as the doors opened and purchased a total of three tables to sell our gear. My goods took up most of one table and Vlado packed the other two with his gear!

By general admission time, less than half of the vendor tables were occupied, which did worry me. However, overall foot traffic wasn’t bad at all! This vendor was certainly pleased.

I sold at least 80% of the items I brought with me, no doubt due to my generous and agressive pricing scheme (i.e. nearly giving things away–!). Vlado sold some large items, too.

In the end, I didn’t purchase a single item at the hamfest. I was in selling mode, not buying mode, at this hamfest as I’ve been making an effort to downsize some of my collection and use the money to offset the costs of travel this year. With that said, I would have snagged a classic portable had one appeared.

This BC-317 is just asking to be taken home!

Mind you, I was very tempted by two BC-317 receivers being sold together for an asking price of $60, but I resisted as the whole idea of “thinning the herd” is to make room in my small radio shack.

I find that small hamfests like Greenwood actually have better vintage radio pricing than the larger ‘fests.

Greenwood Photo Gallery

Though the hamfest was modest in size, there were quite a few quality offerings among the vendors. I was very impressed with the number of transceivers–indeed, a new ham would have had a selection of affordable benchmark 90s era rigs to choose from!

Click on the thumbnails below to enlarge or comment on the photos. Most of the photos were taken prior to the doors opening but I did my best to capture price tag information if available:

I love the design of this Heathkit Signal Tracer

Though this Delco hadn’t been refinished and didn’t have original knobs, it was still a thing of beauty.

A very clean Heath SB-1400.

This Icom IC-761 was eventually sold for less than asking price–a briallint deal for a superb benchmark transceiver.

Vlado was selling this R-1000 which he recently repaired and restored. No one bought it, so if interested, you might try contacting him!

Greenwood had quite a few Drake transmitters and receiver combos for sale.

A gorgeous Collins.

The IC-7200 is a fantastic rig for $650.

Do I plan to revisit Greenwood next year? You bet!

Spread the radio love

The National HRO-5TA1: Parting is such sweet sorrow…

15 Replies

As I mentioned in a previous post, I’m in the process of selling and giving away radio gear that I no longer use or that’s been sitting on the workbench way too long.

This is an easier process when it involves modern gear, as I have comparatively little attachment to radios I could go out and purchase once again, should I feel so moved. The only modern portables I keep, regardless, are those I must have on hand for comparison testing and reviews. And, yes, I do have a number of favorites I never intend to sell.

But when it comes to vintage gear? Letting go is hard to do.

A few years ago, I acquired a bunch of vintage gear and accessories from a friend whose father was a radio operator in WWII. Since then, I’ve been selling this equipment and giving the proceeds to our non-profit (ETOW). I’ve also donated a lot of equipment to the Hickory Aviation Museum in North Carolina––I’m a member, and have been piecing together an AN/ARC-8 system for permanent display (only now lacking a good BC-348).

The only receiver I kept for myself was a National HRO-5TA1. It’s totally original and has likely not been operated since the late 1940s.

In a sense, this is the radio equivalent of a “barn find.”

I love the HRO dial and the overall aesthetics of this vintage set. It absolutely shouts “1940s” radio––! These sets were initially manufactured during WWII under some large orders. Indeed, the “H.R.O.” acronym is said to be the National internal designation of the series…meaning, “Hellva Rush Order.” There were many variations of the National HRO; mine was the 1946 “5TA1.”

The HRO-5TA1 uses coils to change bands. My HRO has the full set of coils and even the coil box. To change coils, you simply pull out (unplug) the coil from the front of the receiver and plug in a new one.

The power supply is self-contained and connects to the HRP-5TA1 via a four conductor plug.

The back panel of the receiver couldn’t be more simple.

Inside, it’s impressively clean for its age; check this out:

If you can’t tell, letting this one go is going to be one of the toughest I’ve experienced. Parting will, indeed, be sweet sorrow. I must give someone else an opportunity to put this girl on the air, else it will sit here for many more years before I have an opportunity to do the necessary upgrades to make her airworthy again (needs at least recapping).

This weekend, my buddy, Vlado (N3CZ) and I will reserve a couple of tables at the Greenwood, SC hamfest. Unless I sell the HRO-5TA1 beforehand, you’ll find it on my table there!

On that note, readers, please comment if you have a suggestion what I should charge for this set. You can also comment if you think I’m crazy for selling it. It’s not going to be easy!

Spread the radio love