Yearly Archives: 2017

Raspberry Pi image with preloaded SDRplay RSP software

The $35 Raspberry Pi 3

SDRplay support have just posted the following news on their community forum:

We have released a Raspberry Pi 3 image that has a number of SDR applications pre-built and tested that support the RSP. Periodically, we will update the image with software updates and new software.

The current list of software included on the image is:

SoapySDR/SoapySDRPlay, SoapyRemote, ADS-B (dump1090), CubicSDR and SDR-J DAB receiver

Please note: This is a complete OS with software image. Writing the image to a micro SD card will wipe the micro SD card of any other data that is on there, so we recommend you make sure you have backed up any data on your existing micro SD card or you use a new micro SD card.

Instructions:

1. Download image. There are two downloads provided, the 7zip version is just a smaller download but not everyone has 7zip which is why we also provide a zip download. The links are here:

http://www.sdrplay.com/software/SDRplay_RPi3_V0.1.zip (2.7 GB)

http://www.sdrplay.com/software/SDRplay … 0.1.img.7z (2.0 GB)

2. Extract the contents of the compressed file. This will extract to a .img file which will be about 7.2 GB

3. Use an image writer such as Win32DiskImager (https://sourceforge.net/projects/win32diskimager) to put the image onto the micro SD card.
WARNING: Please make sure that you use the correct drive letter for the micro SD card. The image writing software will completely remove any data that is on the destination media.

That’s it – put the micro SD card into the Raspberry Pi 3 micro SD card slot and boot the system. Allow the system to fully boot and you will see a GUI that will allow you to run each of the applications or read further information.

We also recommend that you use an active cooling system on your Raspberry Pi 3 to avoid any issues with over heating. In our tests, we have used heatsinks and a fan in a case. The CPU speed will be throttled if the temperature gets too hot, so for optimum use this is really recommended. These cases are available at reasonable prices from many Raspberry Pi stores.

If you are a developer of software that supports the RSP and you would like to be included on the image that we will release periodically, please contact us at [email protected] – currently we’re aiming to update the image every quarter, this will largely depend on software availability and what the demand is.

We are aware of other software that we are looking to get onto the next release such as Pothos and more SDR-J software. We will work with developers on any issues we’ve seen during this process so that we can get them onto future images.

Best regards,

SDRplay Support

This is great news in my book, because a fully-loaded and configured disk image makes it much easier to get started with an RSP/Pi combo.

Note that the message above is merely the announcement on SDRplay’s community forum. I would strongly encourage you to follow this thread, and the forum in general, if you’re interested in updates and announcements.

Raspberry Pi systems are very affordable and available in a number of configurations (from $35US – $80US depending on accessories) and from a number of retailers including:

Spread the radio love

From the Isle of Music & Uncle Bill’s Melting Pot, June 18-24



From the Isle of Music,
June 18-24

This week and next, our special guest is Bobby Carcasses, creator of Jazz Plaza, singer, trumpeter, showman, recording artist, whose new recording Blues Con Montuno just won a Cubadisco award in the Jazz Soloists category. Bobby is one of the most important people in Jazz in Cuba in the past 50 years, and you won’t want to miss this. This week we talk about his career, Jazz Plaza, International Jazz Day and other topics and we’ll listen to his earlier music. The following week he will converse with us about Blues Con Montuno, and we’ll listen to some of the tracks.
Four opportunities to listen on shortwave:
1. For Eastern Europe but audible well beyond the target area in all directions with 100Kw, Sunday 1500-1600 UTC on SpaceLine, 9400 KHz, from Kostinbrod, Bulgaria (1800-1900 MSK)
2. For the Americas and parts of Europe, Tuesday 0000-0100 UTC on WBCQ, 7490 KHz from Monticello, ME, USA (Monday 8-9PM EDT in the US)
3 & 4. For Europe and sometimes beyond, Tuesday 1900-2000 UTC and Saturday 1200-1300 on Channel 292, 6070 KHz from Rohrbach, Germany.

Uncle Bill’s Melting Pot, June 22
Episode 17 of Uncle Bill’s Melting Pot, a musical variety program that features everything from everywhere EXCEPT music that you are probably familiar with, will air on WBCQ the Planet, 7490 KHz, Thursday,June 22 from 2300-2330 UTC (7:00pm-7:30pm EDT in the Americas).   This is our Fathers’ Day special, at least by Uncle Bill’s standards (there, you were warned). Brought to you by Tilford Productions, which also brings you From the Isle of Music.

Spread the radio love

2017 BBC Midwinter Broadcast test transmissions

Rothera Research Station, Adelaide Island, Antarctica (Image Source: British Antarctic Survey)

Many thanks to SWLing Post contributors, Richard Langley and Mauno Ritola, who shared frequencies and times for the test transmissions in advance of the BBC Midwinter broadcast next week (June 21).

I didn’t get their tips in time to post prior to the transmissions yesterday, however, Mauno believes there may be another test transmission today.

This schedule was originally posted by Martin Goulding on BDXC-UK list–times are GMT:

ASCENSION

2130-2145 7360 kHz

DHABAYYA

2130-2145 – 6035 kHz

WOOFFERTON

2130-2145 7230 kHz
2130-2145 5985 kHz

Please comment if you log a test transmission today (or if you logged one yesterday)

As in years past, I plan to record the actual broadcast next week and share all of your recordings here on the SWLing Post as well.

Click here to browse the Midwinter recordings from last year.

Spread the radio love

Radio Bulgaria petition

Many thanks to SWLing Post contributor, David Iurescia (LW4DAF), who writes:

Hi Thomas: I’m sending you what I received today from Radio Bulgaria.
The petition can be read in Spanish, English or Bulgarian.

Dear Friends:

We need your support for a noble and responsible cause.

Radio Bulgaria, which belongs to National Radio of Bulgaria, is the only means of communication that presents the image of Bulgaria before the world in nine languages, as well as in Bulgarian language with programs destined to the Bulgarian communities abroad. Today Radio Bulgaria faces the risk of being in history!

We urge you to support the efforts of editors, journalists, translators and institutions against this destructive act, contrary to the interests of society and statehood of Bulgaria, signing our request to save our, and yours also Radio Bulgaria.

Here is the address of the website with the request: http://www.saveradiobulgaria.com/en

Sign, please.

Spanish Language Section of Radio Bulgaria

Many thanks, David!

Spread the radio love

Travelling and DXing with the Bonito MegActive MA305 antenna

 

Ok, so officially it wasn’t a DXpedition; it was a well needed vacation in the sun after several hectic months of work, some of which involved travel to slightly more exotic locations. However, these days, I view any travel, whether it be for business or pleasure as a ‘DXpedition’ opportunity! Some of you might remember that I purchased a Bonito Boni Whip at the beginning of 2017 because (a) I needed another antenna and (b) a second Wellbrook loop felt like too much of an extravagance. They’re excellent antennas for sure, but at around £300, I couldn’t justify buying another. Thus, for about a third of the price I bought the Boni Whip. It proved to be an excellent choice – very compact and so perfect for my regular DXpeditions, quick to set up and capable of really excellent DX. There are many videos on the Oxford Shortwave Log YouTube channel that are testament to this. I wrote a couple of articles, published here on the SWLing Post which were seen by Dennis Walter of Bonito, who subsequently contacted me and offered to send over their MegActive MA305 E-field antenna for testing. Dennis made it crystal-clear that I was to ‘do my own thing’…test the antenna in any way I saw fit and publish my findings so DXers/radio enthusiasts could learn more about the capabilities of the antenna – from another DXer. I was happy to agree to this arrangement and the MegActive MA305 duly arrived, complete with two lengths of (bayonet BNC terminated) high quality H-155 coaxial cable.

 My portable Dxing kit with MA305 antenna                 The MA305 power inserter and USB power ‘brick’

The specifications of the MegActive MA305 are very similar to the Boni Whip; they both offer a Gain of +3 dBs, second and third order intercept points of greater than +30 and +50 dB respectively and both tune to 300 MHz. The MA305 is supplied with a longer radiating element and tunes down to 9 KHz (versus the 20 kHz lower limit for the Boni Whip). Obviously this isn’t a specification that is going to concern most radio enthusiasts; both offer fantastically wide operating bandwidths. The way in which these antennas do differ quite significantly however, is in how they are powered. The Boni Whip operates from 12 to 15 V, whilst the MA305 operates from 5 to 15 V. Bonito’s design philosophy regarding this feature is based on the increasing difficulty in procuring reasonably priced analogue external plug-in power supplies (they are no longer allowed to be produced due to power consumption restrictions).

Interestingly, when the power supply for my Wellbrook ALA1530 packed up, I called them to purchase a replacement and was told they only have limited stocks remaining. Thus, a solution for powering active antennas with a suitable low-noise supply is an issue that needs resolving. The guys at Bonito figured a USB power source was suitably quiet and with USB ‘power bricks’ almost ubiquitous these days for charging mobile phones and other portable electronic devices on-the-go, the idea could be applied to their active antennas. The result is the MegActive MA305, designed to operate at 5 Volts with no loss of performance. As a DXer who probably spends more time listening on DXpeditions than I do in my shack at home, the USB power solution was perfect. I myself often carry a cheap Chromebook laptop to use as an additional power source for my camera phone when I’m DXing, so Bonito’s design approach resonated with me completely.

 

Travelling with the MegActive MA305

Ok, so the MA305 is very compact and very light indeed – perfect for a trip to Crete! However, I know from many conversations with my YouTube friends and followers that some of us feel a slight sense of trepidation carrying shortwave radios and antenna systems on board flights, be they national or international. I myself wasn’t really concerned other than if my bag got pulled from the X-ray machine, there’s often quite a long wait whilst the security staff work through the queue of luggage requiring er…human intervention! Predictably, my rucksack did get pulled and I waited patiently until it was my turn to explain the contents! Looking back on this retrospectively, it’s hardly surprising. Other than the usual holiday paraphernalia, my rucksack contained:

  • A 10.0 metre length of H-155 coaxial cable
  • A 1.0 metre length of H-155 coaxial cable
  • Eton Satellit receiver
  • MA305 Coaxial Power Inserter
  • MA305 Antenna Amplifier
  • Bonito USB ‘Power Brick’
  • Bonito USB Power Cable
  • NooElec RTL-SDR dongle
  • NooElect ‘Ham It Up’ upconverter
  • Various screened cables and connectors
  • 10 metres of equipment wire

I explained to the (friendly) security chap that I was a shortwave radio hobbyist and identified the various pieces of equipment for him, as he removed them from my rucksack. He confirmed my X-ray had ‘lit up’ (in blue as it happens) with metallic/electronic items and was even kind enough to swivel his monitor to show me the mess of items strewn across the screen – just as I had thrown them all into my rucksack! However, after quickly swabbing some of the items, he said all was fine and hoped that I enjoyed my holiday and listening. Service with a smile at Gatwick Airport – and I was on my way. My outbound experience got me thinking whether it would be possible to pack my DXing kit in such a way that it wouldn’t alarm airport security. Thus, for the trip home, I packed all of my cables into my (checked-in) suitcase. I figured it would be obvious there was no security risk associated with cables alone. I then packed my RTL-SDR, upconverter and all of the MS305 components very neatly into a single box and put that in my carry-on rucksack. Now, some might argue that security measures at Heraklion International Airport in Crete differ a little from London Gatwick, but I observed staff at the X-ray machine very carefully monitoring every piece of luggage passing through it – including my own and I passed straight through without a problem. All I did was take my laptop out as usual, and put it in a separate tray. Job done.

DXing with the MegActive MA305

                                      My listening post in Crete, with the brilliant Eton Satellit receiver

My apartment in Crete was on the second floor and a large balcony provided a decent outdoor location for DXing. As regards electrical noise, the location was much quieter than my shack at home, but it certainly wasn’t perfect, thus a good test of the MA305 in a real-world pseudo-urban environment. in an attempt to improve SNR, I bought a cheap ‘Selfie Stick’ and some tape and managed to construct a mount for the amplifier, increasing the overall height above ground by about 1.5 metres and displacing the radiating element an additional 2 metres thereabouts from the building. I’m not sure whether it made much difference, but it seemed like the sensible thing to do for less than 10 Euros.

During my week-long stay, I managed to fit in several listening sessions and copied some really excellent DX from this ultra-compact, USB-powered set up. In fact, the MA305 coupled to the Eton Satellit performed so well, I managed to copy a number of personal firsts, including CRI on 7295 kHz, via their relay in Bamako, Mali, The Voice of Beibu Radio on 5050 kHz, Nanning, XSL ‘Slot Machine’ on 6251 kHz USB, Ichihara, Japan, S32 ‘The Squeaky Wheel’ on 3828 kHz and NHK World Radio Japan, 11910 kHz. I also copied RTM Wai/Limbang FM on 11665 kHz from Kajang, Myanmar Radio on 5985 kHz and AIR Bhopal on 4810 kHz, amongst others – all of which I would certainly consider to be difficult catches in Europe. To hear them with an 18 cm antenna felt pretty special. African shortwave stations were also very well represented and I managed to copy a number of them including Radio Hargeysa on 7120 kHz, Voice of Tigray Revolution on 59150 kHz, Radio Oromiya on 6030 kHz, Radio Fana on 6110 kHz, Radio Ethiopia on 7235 kHz, Radio Sonder Grense on 3320 kHz and Radio Guinée on 9650 kHz. I expected to hear all of these stations, except for Radio Guinée, which is farther away from Crete than the UK. So, all-in-all an excellent result.

Despite hearing a lot of excellent DX whilst in Crete, there is one signal I copied, which more than any other, demonstrates the DXing credentials of the MA305 – and Eton Satellit for that matter. In the early hours of the morning (00:59 hrs UTC) I copied and recorded Radio Tarma from Peru on 4775 kHz. With a TX power of 1 kW, this is a very difficult station to hear in Western Europe, even with a longwire. To catch this station in Crete, at all, was incredible on an ultra-compact set-up. It was at this point during the trip that I realised E-field antennas really do work superbly well for hard-core DXers on the move. It inspired me to conduct further tests back home in the Oxfordshire countryside, where electrical noise is absent. This I did a few days ago, with some quite amazing results on the Tropical Band. More on that to come in my next post. In the meantime, please find text links and embedded videos for selected reception recordings, below. Many more recordings are available on the Oxford Shortwave Log YouTube channel and please don’t hesitate to contact me if you require further information on the MA305 or the Eton Satellit. Thanks for reading/watching/listening and I wish you all excellent DX.


Personal firsts

Click here to view on Oxford Shortwave Log

 

Click here to view on Oxford Shortwave Log

 

Click here to view on Oxford Shortwave Log

 

Click here to view on Oxford Shortwave Log

 

Click here to view on Oxford Shortwave Log

 

Radio Tarma, Peru, 4775 kHz

Click here to view on Oxford Shortwave Log

 

Other notable catches

Click here to watch on Oxford Shortwave Log

Click here to watch on Oxford Shortwave Log

Click here to watch on Oxford Shortwave Log

Click here to watch on Oxford Shortwave Log

 

Clint Gouveia is the author of this post and a regular contributor to the SWLing Post. Clint actively publishes videos of his shortwave radio excursions on his YouTube channel: Oxford Shortwave Log. Clint is based in Oxfordshire, England.

Spread the radio love

Carl Laufer of RTL-SDR.com on HamRadioNow

(Source: Southgate ARC)

Carl Laufer’s RTL-SDR on HamRadioNow

Carl Laufer isn’t a ham (yet), but he got caught up in the RTL-SDR craze in his home town, Auckland NZ, as he was completing his PHD

He began writing about them, and selling them, on his blog at www.RTL-SDR.com, and soon discovered that the little SDR receiver dongles could stand some improvement.

So he designed ways to make them work better, and contracted a Chinese manufacturer to build them with his mods. That just about doubled the price, from $10 to about $20. Yeah, big deal.

TAPR invited Carl to come to the 2017 Dayton Hamvention to talk about them at both their Friday Forum (part of HamRadioNow Episode 324) and as the main speaker at the TAPR/AMSAT Banquet.

And we got him for a conversation with HamRadioNow’s KN4AQ and PhasingLine’s Chicken With Fries in the SIB back in Tent City.

Watch HRN 328: Carl Laufer’s RTL-SDR on HamRadioNow:

Click here to watch on YouTube.

I got to meet Carl at the Hamvention this year–what a great guy and his website is certainly the best source of information about the RTL-SDR.

I should note that I also met with contributor, Mike Ladd, in person at the Hamvention. Mike now works for SDRplay.

This is one of the great things about gatherings like the Hamvention–it brings together so many people that you’d otherwise likely never meet in person!

Spread the radio love