Category Archives: Ham Radio

Listening to the International Space Station (ARISS) with a Yaesu VX-3

Yesterday, my buddy Eric (WD8RIF) sent the following message:

“Take your girls outside with an HT and listen to the ARISS pass in just about 10 minutes. The downlink freq is 145.800.”

Though I was in the middle of another project, I took Eric’s advice: I grabbed my Yaesu VX-3, corralled my daughters and ran outside. Eric’s message was already eight minutes old when I read it, so I only had about two minutes to get ready.

My Everyday Carry (EDC) pack, loaded with all of the essentials.

Fortunately, I always have a Yaesu VX-3R loaded with fresh batteries in my EDC pack (above).

Official NASA portrait of British astronaut Timothy Peake. Photo Date: August 28, 2013. Location: Building 8, Room 183 - Photo Studio. Photographer: Robert Markowitz

Official NASA portrait of British astronaut Timothy Peake. Photographer: Robert Markowitz

With the VX-3 tuned to 145.8 MHz, we waited as the ISS made its way above the horizon. The downlink audio of astronaut Tim Peake (KG5BVI) communicating with Walter Jackson Elementary in Decatur, Alabama, started to punch through the static after a minute or two. We listened the entire time we had line-of-sight to the ISS–about five minutes or so. We were pretty deep in a valley at that point, so I’m pleased we were able to catch even that much of a pass.

Of course, we could only hear one side of the conversation: the downlink from the International Space Station.

It was a memorable event for my girls who have seen ISS passes at night, but had never heard live audio from an astronaut before.

Here’s a short video of two of the exchanges we heard:

(Click here to view on YouTube.)

Eric pointed me to the ARISS “Upcoming Contacts” (http://www.ariss.org/upcoming-contacts.html) page where future ARISS QSOs are listed. Evidently, this particular ARISS QSO was the third Eric had monitored in two weeks.

Pretty much any receiver that can tune to 145.80 MHz FM–or a VHF scanner–can hear the ARISS downlink as long as the ISS is passing overhead during the transmission. Of course, if you have a high-gain antenna that can track the ISS as it moves across the sky, you’ll get even better results than I did with my basic rubber duck antenna.

My advice? If you want to impress a child (or your inner child–!) find a little time to listen to a future ARISS QSO!

Indeed, the next step for me is to see if I can propose an ARISS QSO for our school group!

Mark’s Icom IC-7100 go kit

4 Replies

Click to enlarge

Many thanks to SWLing Post reader, Mark Hirst, who writes:

Thomas,

I have been very impressed by the shacks featured on SWLing !

I don’t really have the room to accommodate such large collections, or to dedicate a special area to just radio.

I tend to perch a radio on a spare surface in the front bedroom, and then cycle through my small collection on a weekly or bi-weekly basis, returning the previous radio to storage to await its turn in a month’s time.

Since newer houses and gardens are typically quite small in the UK, I’ve always been thinking in terms of radio on safari, so with the weather starting to improve, I present to you my ‘shack’ consisting of a recently acquired IC-7100 inside a fortuitously sized toolbox. The radio runs in the bedroom like this too, usually connected to a Wellbrook loop when not transmitting.

The picture [above is of the] head unit in stowed configuration, as the lid of the box doesn’t quite clear the unit when sitting on the base. The space on top of the radio is then filled by the SOTA Beams antenna bag and other sundries. The battery travels separately in the backpack.

My plan was to never have to connect/disconnect the ethernet style cable between the two halves, looks like the plan worked !

You can see it in action here:

This is a brilliant kit, Mark–a great way to escape urban radio interference! The Icom IC-7100 is uniquely qualified for the deep case, too, since the control head can sit on top of the body while in use. The angle of operation is also ideal. Very cool–thanks for sharing!

Stuart Sizer: Heathkit designer, dad, and “bon vivant”

9 Replies

Two weeks ago, through a radio preservation group, I met the son of Heathkit product designer of the 1950s-70s, Stu Sizer––”stylist, artist, maker of models, bon vivant.” His son described the discovery of a few vintage Heathkit brochures, photos, and illustrations his father kept in his family’s basement shop, many of which had been scanned at some point.

Stu Sizer––”stylist, artist, maker of models, bon vivant”––was tasked with crafting Heathkit’s user-friendly and attractive exterior designs. For many years Sizer was Heathkit’s only product designer, and was therefore often busy. “He was a great dad,” his son told me, “but he spent a lot of time in the basement proof-building kits.” He adds wryly, “Let that be a lesson to the hams of this world.”

Sizer’s son kindly shared with us the following scans and photos of his dad’s work, many of which are original drawings; the series concludes with some clippings featuring Sizer.

On Stuart Sizer

Video: TX Factor Episode 10

Bonito’s new catalog in English

Mike’s Virtual Audio Cable (VAC) promotion

1 Reply

SWLing Post contributor, Mike Ladd, has been working with vendors to lock in promotional pricing on products and accessories commonly used by SDR enthusiasts. Last week, for example, he shared an excellent promotion for high/low pass filters.

This time, Mike has reached out to the author of Virtual Audio Cable (VAC) who has also kindly offered a discount.

VAC is a fantastic piece of software that allows you to port audio from one application to another on your PC without loss of audio quality. For example, if you’re running an SDR and you want to port its audio to FLDigi (to decode SSTV, RTTY, PSK31, or another digital mode) VAC does this for you.

Mike’s discount allows you to purchase a self-support copy of VAC for $21.42 US (a $3.78 discount).

To get the promo price, you’ll need to use this link which has the embedded coupon code, then simply make the selections as shown below:

Click here to purchase VAC with promotional pricing.

Thanks again, Mike, for sharing discounts with the SWLing and ham radio communities!

Icom IC-7300: retail price and shipping dates set

9 Replies

Many thanks to Dave Zantow (N9EWO) who notes that Universal Radio is accepting orders for the Icom IC-7300 at a price of $1499.95 US and expects to ship units by the latter part of this month (March 2016).