Shortwave listening and everything radio including reviews, broadcasting, ham radio, field operation, DXing, maker kits, travel, emergency gear, events, and more
With the radio off, press and hold button 5, this disables/enables the light switch.
Pressing same button whilst on FM reveals information of which I’m unsure, I expect you or your readers will no doubt know what that’s about.
Thanks for sharing this, John. I’ve let a friend borrow my PL-880 so I don’t have it for reference. I’m hoping someone here can shed some light on the information display you’re seeing by pressing button 5 while in FM mode.
Hello readers! As a broadcaster I am always interested in the reach of various transmissions – how far they propagate and how they can be received! Today I’m asking the following:
Can you hear this transmission?
Saturday 2200 UTC (6 PM Eastern / 5 PM Central) – 6115 kHz – WWCR 100 kW – North America
The show is 1 Hour in length and will feature a variety of music from the 1960s to Present, including listener requests! It’s a very diverse show where you are guaranteed to hear music of many genres and eras!
If you can receive this broadcast I encourage you to submit a reception report via email to [email protected] and it will be verified with a QSL.
Many thanks to SWLing Post contributor, TomL, who shares the following guest post:
Summer Daytime DXing 2019
by TomL
I took note of the mediocre band conditions this summer amongst amateur radio operators as they were making off the cuff comments about still being in a solar minimum. Some had gone out and bought upgraded transmitters to solve the problem (MOAR WATTS!). And more power thrown at a weak ionosphere does seem to help get a signal farther. I had not been out since the spring and decided to find out for myself. But instead of more watts, I wanted more height.
Greene Valley Scenic Overlook is open to the public from May through October on weekends only (and only from 11am-6pm). It was the largest land fill (aka, garbage dump) in Illinois, now covered over and producing captured methane gas. On August 3 & 4, I ventured over there to see if its 190 feet above the surroundings might help my radio reception.
After trying my luck with a 12 foot vertical antenna on a tripod (and numerous children running around it chasing butterflies or looking at the view of Chicago), I went out the next day and parked away from anyone and put up my 19 foot vertical on the roof of the car. This setup is still amazing to me and works much better than the tripod mounted antenna, probably because it has a proper ground plane as well as being 7 foot taller.
So, yes, the conditions were so-so, not too bad and not too good. Lots of weak signals and some empty frequencies that I had expected to hear some South American stations around the 5 – 10 kw range. Weak stations from Asia were more scratchy sounding than usual even with the extra 190 feet of height. Here are 5 broadcast recordings as a sample (times in UTC):
Running out of things to listen to, I wandered over to the 20 meter amateur radio band and found a different situation. Propagation was decent between the Western hemisphere and Europe. Lots of “pile ups” going on with people trying to make contact with their trans-Atlantic counterparts. Some said they were running 500 watts or more, so more power does seem to help! Here are 5 recordings to show how active it was:
This outing was quite educational and I find it curious that people running 1000 watts or less are able to be heard well between continents but the large broadcasters were difficult to hear. Antennas pointed in the right direction, at the right time of day and frequency, can certainly do amazing things, plucking those weak signals out of the air so easily. And I do think the extra height had something to do with hearing this magic, too!
Happy Listening,
TomL
NOTES:
An easy way to lookup amateur radio operator “call signs” is to go to web site QRZCQ.com which does not need a login. Some records may be out of date, but most of it is accurate.
Setup used was a cheap Dell laptop, Windows 10, SDR Console 3.03, connected to the AirSpy HF+, a Palstar amplified preselector, and an old Kiwa BCB filter, then going up to the car roof magnetic balun (a Palomar MLB2) which is then connected to the 4 magnet base and the MFJ 19 foot stainless steel antenna. You can read about it here:
Brilliant report, Tom! It’s true: the bands are fickle, but like you I always find interesting things to hear on HF. I think your setup using your vehicle as the ground plane for the antenna is a fantastic idea. Plus, set up is easy, self-supporting, and you’ll never have to worry about a park ranger, for example, complaining because you have a wire suspended from a tree. And when there are no trees? You’re still golden.
Thanks for sharing your experience and DX! Amazing that even with mediocre conditions, you still snagged some distant signals.
Many thanks to SWLing Post contributor, Eric McFadden (WD8RIF), who shares the following announcement from Ken (WA4MNT) via the QRP-L forum:
QRPGuys is open for orders after this year’s Summer shutdown. We have added a product that may be of special interest to SWL listeners and some hams. It is an active antenna splitter that will enable connection to three receivers from a single antenna.
Product Deescription:
The KN8TND Active RX Antenna Splitter will allow you to use one antenna with mulitple HF receivers simultaneously. Many hams and SWLers like to monitor several bands and/or frequencies, i.e. 14.300, international nautical emergency freq, 14.100, world HF beacons, etc, etc. Having two or three HF receiving antennas is a luxury some Hams and SWLers can’t afford. With the active receiver antenna splitter you can use one antenna and three receivers at the same time. Keep abreast of what’s going on on the bands, put some of those dust collecting receivers back in action. On a difficulty scale of 1 to 5, this kit is a 2. Build time is about 2 hours, depending on your experience, with the normal kit tools. Bear in mind, this is for receiving only. For HF transceivers you would need a T/R switch to your tuned transmitting antenna.
QRPGuys makes amazing QRP kits. Immediately after receiving Eric’s email, I purchased the active antenna splitter kit. Total cost with shipping was $25 US. A true bargain! Although I already have an ELAD Active antenna splitter, this one would be nice to take to the field as it’s much smaller and lighter weight.
Fernando Duarte of Fenu-Radio has just posted his review of the AirSpy HF+ Discovery SDR prototype. I trust Fenu’s reviews because they’re always thorough and based on actual listening sessions.
In short, he’s quite impressed with the prototype. In many instances the Discovery outperformed his benchmark Winradio G33DDC Excalibur Pro. Quite an accomplishment for a $169 SDR!
I will evaluate a first production run AirSpy HF+ Discovery. Since it’s incredibly lightweight and compact, I believe I’ll try to even build a small portable SDR station around it. Stay tuned.
Many thanks to SWLing Post contributor, RBC, who shares the following article from the website Defense One:
For more than four months, Hong Kong has been in the grips of a civil crisis. Protestors have taken to the streets to challenge the Hong Kong government’s growing acquiescence to Beijing while Chinese government forces and their allies have used militias to attack protestors and electronic tools to disrupt their communications. But media censorship means that few mainland Chinese know what’s going on.
A Silicon Valley-based organization has found a way to get information into China and out to Chinese speakers around the world: shortwave radio.
“Shortwave broadcast is kinda like a grey area,” said Sean Lin, one of the co-founders of the Sound of Hope radio network. “There’s no law that says you cannot do it. It depends on if governments want to keep [a particular radio station] going or shut it down based on Beiging’s pressure,”
Shortwave radio has been used for decades to broadcast news, information, political messages, and disinformation. During World War II, the Germans and the British both used radio waves between 3–30 MHz (10 to 100 metres) to try to persuade listeners around the world.
Sound of Hope, co-founded by Lin and Allen Zeng in 2004, looked to take the same technology and broadcast messages into China. Zeng originally set up the station to broadcast to the Chinese language population in Silicon Valley. It was his response to a dearth of Chinese-language news coverage that wasn’t heavily influenced by the Chinese government. “You would expect them [Chinese language news and media in the United States] to have some basic media decency and do their job. They don’t. They all have family in China. They need to go back to China. They need to do business in China,” said Zeng.[…]
Many thanks to SWLing Post contributor, Dan Robinson, who shares this excellent photo gallery from the Berryville Hamfest. Dan notes:
You will notice one photo in particular — of a rare Skanti R-8001 and a Telfunken E1500.
The Skanti, which went for only $600, is now comfortably sitting in my radio shack!
Wow! What an impressive collection of radios at this flea market. Looks like Berryville is worth the trip for anyone with an interest in vintage radio.
