Tag Archives: Tecsun

Matt compares the Tecsun PL-990 to the Icom IC-R9500 on an external antenna and the results are surprising

28 Replies

Many thanks to SWLing Post contributor, Matt Blaze, who shares the following comparison of the new Tecsun PL-990x and the benchmark Icom IC-R9500 communications receiver.

Matt’s excellent comparison  is in audio form. I highly recommend listening with headphones or, at least, an audio device with separate left/right channels as his comparison takes advantage of this.

I love not only how he set up this comparison with both radios sharing an identical antenna, but his evaluation also explores how well the PL-990 handles a proper external antenna via its external antenna jack.

Click below to listen to Matt’s piece, or right click here to download the audio:

Thanks for sharing this, Matt. You’ve inspired me to do similar narrated audio comparisons!

Spread the radio love

Tecsun PL-990 Hidden Feature: Toggling ferrite bar and telescopic whip antenna on MW & LW bands

11 Replies

Many thanks to Anna at Anon-Co who recently shared an interesting “hidden feature” of the Tecsun PL-990 which allows the user to toggle between the internal ferrite antenna and telescoping whip antenna while on either the mediumwave or logwave bands.

Procedure:

1) Turn on the radio and then select either the MW or LW frequency band.

2) Press and hold the [ 3 ] key for about 2 seconds.

When the display shows “CH-5” (actually an “S” which stands for shortwave telescopic antenna) the radio is now set to MW/LW reception using the telescopic whip antenna.

The display will show MW (or LW) and SW on the left side of the screen.

3) Press and hold the [ 3 ] key for about 2 seconds.

When the display shows “CH-A” (“A” stands for “AM”) the radio is now set to MW/LW reception using the internal ferrite antenna once again.

The display will also show only MW (or LW) on the left side of the screen.

Pressing and holding the [ 3] key essentially toggles between these two antenna settings.

I’ve actually found that, indoors, using the whip antenna on mediumwave has been more effective at mitigating RFI with strong local stations. The ferrite bar antenna has more gain, of course, but for locals it’s not necessarily needed.

Many thanks, Anna, for sharing this tip!

Spread the radio love

Anyone sorted out how to calibrate the Tecsun PL-990?

8 Replies

I mentioned in a previous post that one of the “hidden features” of the PL-990 series is the ability to calibrate the radio so that the frequency display is correct when say, you zero-beat an AM broadcaster/carrier in SSB mode.

For normal AM broadcast listening, you’d never notice the frequency discrepancy on the display. When I used the PL-990 in ECSS mode, though, my frequency display is a few Hertz off pretty consistently across the spectrum.

Our friend Gilles Letourneau (at the Official SWL Channel) recently told me that after a couple hours of tinkering with his PL-990 last weekend, he was able to calibrate it but was so deep into the process, he wasn’t able to document exactly how he achieved it. Of course, now that it’s accurate, he doesn’t want to inadvertently harm the calibration. I don’t blame him.

Big news is he’s confirmed that it’s possible.

I’m curious if any PL-990 or PL-990x owners have successfully calibrated their receiver. If so, please consider sharing your procedure with us!

UPDATE

Gilles comments…

“Tune a strong signal in AM .. like WWV then use LSB USB modes to fine tune the receiver as close to zero beat as possible. Then simply press and hold the USB key until display light flashes two times … you will be all set and calibration will work !”

Spread the radio love

Tecsun PL-330: Initial impressions, overview of functions, and operation

57 Replies


Many thanks to SWLing Post contributor, Jaap de Goede, for the following guest posts:

Operating the TECSUN PL-330 without an English manual

by Jaap de Goede

Introduction

Inspired by my father, I like listening to radio transmissions for the last 60 years. That includes listening to shortwave transmissions. In my collection there are a number of radios including computer based SDR-receivers. The TECSUN PL-330 is a shortwave portable radio with SSB and digital readout.

I’d like to share my operating experience of the PL-330 and throughout I will now and then compare this radio to similar radios in my collection:  Eton Satellit, XHDATA D-808 and CountyComm GP5-SSB (AKA Tecsun PL-365).

To be clear the PL-330 used here is a Chinese domestic version, probably manufactured in July 2020. An English manual was not available at the time of writing. In the meantime, the English manual of the Tecsun PL-990 helped to figure out a number of the features of the PL-330. Newer manufacturing batches might contain other firmware and that could change the way of operating.

Size and sound

With a volume of about 18 cubic inches the PL-330 is less than 20 cubic inches. It easily fits the pocket of my jeans. 20 cubic inches (unofficially) classifies it as an Ultralight DX radio. The smallest radio of the four is the GP5-SSB with 14 cubic inches. The Satellit is the largest of the four and the size of these radios can be determined by the eye but by the ear as well.

The PL-330 has digital VOLUME control and the volume level is indicated on the display. In contradiction, the three other radios have analog volume control. All radios have a 3.5 mm socket for a stereo headset. A nice feature of the PL-330 is that the FM stereo decoder only works with a plugged-in headset. Else FM remains in mono.  I think that’s a very clever feature because why would the stereo decoder degrade the mono-sound through the speaker in case of poor FM stereo reception?

Personal audio quality ranking from best to worst:

  1. Satellit
  2. PL-330 and D-808
  3. GP5-SSB

Power and Batteries

The PL-330 is supplied with a BL-5C battery of 1000 mAh. The battery can be charged in the radio through though a micro USB port. The display permanently shows battery status, regardless whether the radio is on or off. USB makes it very easy to charge from any external USB charger or an external USB battery. Here a quick comparison of the powering of the four radios:

Radio Battery Charging Port
Tecsun-PL-330 1 x BL-5C Micro USB
CountyComm GP5 3 x AA NiMH Mini USB
XHDATA D-808 1 x 18650 Micro USB
Eton Satellit 4 x AA NiMH Bus

 

I don’t have runtime figures. I just charge when indicated on the radio’s display and carry a spare USB battery to charge the radio in case.

Antenna and Backlit

All four radios have an extensible whip antenna (what else would you expect). Also, all four radios have a 3.5 mm socket for an external antenna. The only radio with an antenna attenuator switch is the Satellit.

All four radios have backlit. But a feature that none of the other radios has is the ability with the PL-330 to toggle the backlit between “always on” or “automatic off”. Just hold and press the 5 button to toggle between the two modes. For comparison, the Satellit has the nicest illuminated display of all four, while the D-808 is way too bright.

Supported Radio Bands

The PL-330 supports the following radio bands:

  • Long Wave (153-513 kHz)
  • Medium Wave (520-1710 kHz or 522-1620 kHz)
  • Short Wave (1711-29999 kHz)
  • FM broadcast (64-108 MHz)

Radio Band and Demodulation Selection

To enable or disable the LW-band you must long press the 2 button when the radio is powered off. When the radio is powered on and LW has been enabled you can select between LW and MW by short press of the MW/LW button.

The American or Rest of World MW-band plan can be toggled by long press the 3 button when powered off. When the radio is powered on you can select between MW by short press of the MW/LW button.

To select the regional FM-band plan you should long press the 0 button when the radio is powered off. When the radio is powered on the FM-band can be selected by short press FM/ST. button.

When the radio is powered on the SW-band can be selected by short press < or > button.

In LW, MW and SW bands de-modulation can be AM, SSB and AM synchronous (SYNC). A short press of the SSB button toggles between AM and SSB. A long press of the SSB button toggles between AM/SSB and AM synchronous mode.

A nice feature within the SW band is that you can quickly skip to pre-determined broadcast or HAM bands. In AM and SSB mode you can skip to the desired band by pressing < or > button. The following bands can be selected and indicated in the display:

  • AM (broadcast) bands: 120m, 90m,75m, 60m, 49m, 41m,31m25m, 22m, 19m, 16m, 13m, 11m
  • SSB (HAM) bands: 160m LSB, 80m LSB, 60m, LSB, 40m LSB, 30m USB, 24m USB, 20m USB, 17m USB, 15m USB, 12m USB, 10m USB

Manual Tuning and Step Sizes

There is one (digital) TUNING dial for all tuning operation in any radio band. It only tunes up and down the bands and has no other function. (That makes tuning with the PL-330 so easy compared to the other three radios with multifunction dials.) Depending on the selected band and de-modulation the tuning steps can be altered by the STEP button.

In the LW and MW bands for AM demodulation the step size can be toggled between 1 kHz and 10/9 kHz by short press of the STEP button.

In SW for AM demodulation the step size can be toggled between 1 kHz and 5 kHz by short press of the STEP button.

In the SW band for SSB and synchronous mode the step size can be toggled between 10 Hz, 1 kHz and 5 kHz by short press of the STEP button. My other three portable radios, but only plus or minus 1 kHz of the actual frequency in steps of 10Hz. The PL-330 has continuous fine tuning in SSB; you can tune the entire SW band up and down in steps of 10 Hz. However, I noticed that the step size can change from 10 Hz to 50 Hz in case you turn the TUNING dial fast.

In the FM band the step size can be toggled between 100 kHz and 10 kHz by short press of the STEP button.

Bandwidth Settings

For AM and SSB you can change the bandwidth by pressing the AM BW button, turn the VOLUME dial to the desired bandwidth and press the AM BW button again.

  • LW/MW band, AM bandwidth selection: 2.5 kHz, 3.5 kHz, 5.0, 9.0 kHz kHz
  • SW band, AM bandwidth selection: 2.5 kHz, 3.5 kHz, 5.0 kHz
  • SSB bandwidth selection: 0.5 kHz, 1.2 kHz, 2.2 kHz, 3.0 kHz, 4.0 kHz

Easy Tuning Mode or ETM and Memories

I decided to purchase the PL-330 because of my good and bad experience with the GP5-SSB (PL-365). The PL-365 is super portable and I think ETM is great for occasional shortwave listening. However, without direct frequency entry the GP5-SSAB is a nightmare to operate just now and then. Now the PL-330 has an enhanced version of ETM:  ETM+. No other radio has such a feature and I think ETM+ is fantastic.

ETM + provides 24 ETM banks that are chosen automatically based on the hour. Every hour you can press and hold the ETM button to initiate a (new or renewed) shortwave scan. It will display “E” plus the hour in 24 hours format like E00 to E23 depending on the time. When you quick press the ETM button it recalls the memory bank according to the time. As an example, when you quick press the ETM button at 15:24h it will recall bank E15. Then you can select the memory locations stored in the bank by turning the TUNING dial.

To toggle between ETM and Tuning mode press the ETM button.

In addition to ETM memories, the PL-330 has a lot of memories but lacks alpha tags. I really have difficulties remembering what I put in those memories. I hardly use them. The only one of the four that has alpha tags is the Eton Satellit, that makes things a lot easier.

Memories can be automatically populated in a bank separate from the ETM banks by using the Automatic Tuning and Storage (ATS) function. All four radios have ATS and I think it’s only convenient for FM. It works like:

  1. Press FM/ST. to select FM Band
  2. Press and hold FM/ST. to start ATS
  3. Use the TUNING dial to select from the stored FM stations

To toggle between Memory and Frequency tuning mode simply press the VM/VF button.

Bugs or Features

With the DISPLAY button you can change the upper right part of the display between:

  • Signal strength
  • Clock
  • Preset (only in VM Mode)
  • Alarm time

The display always returns to signal strength after a few seconds. Except if time is chosen with a long press of the DISPLAY button. Nevertheless, the display returns to signal strength after applying any operation, including volume change. I’m not sure if this is a feature or a bug.

When using a headphone and changing volume, sometimes the sound is cut off. By changing the volume again, it comes back. Seems like a bug, not a feature.

I tried AM synchronous mode. It works like on the Satellit: poor. I would recommend to make this mode hidden or make it work well.

Universal Serial Bus

When connecting the radio with an USB cable to a PC, its operating system does not show any connection information. If the radio would have USB logic apart from charging, connection information would have showed up. I assume there is no way to update firmware via USB.

Hidden Features

Without an English manual, and maybe even with a Chinese manual I couldn’t understand all functions.

When the radio is powered off:

  • Press and hold VF/VM shows all items of the display.
  • Press and hold 8 toggles display clock in “HH:MM” and “HH:MM: SS”
  • Press and hold 3 in MW/LW band toggles between internal ferrite and external whip antenna
  • Press and hold Enter shows “dEL ALL”, probably delete all (except what is all)?
  • Press and hold M shows numbers, no idea.
  • Press and hold 0 shows “PO []”, no idea.

There seems to be a combination to show the firmware version.

Missing Features

RDS display would be welcome. Even though the PL-330 shares the radio chip with the D-808 and the Satellit, the PL-330 does not display FM Radio Data System (RDS) on its display. Backlit buttons would be a welcome for operation in the dark. (Although you’ll quickly get used to the button layout.)

Features I didn’t miss

None of the four radios has DAB+ or HD radio. For DAB+ reception I use a Sony XDR-S41D and I can’t receive HD radio in Europe. DAB+ and HD radio could make the radio way more expensive and I prefer good SW performance anyway.

The possibility to upgrade firmware would be convenient. But I understand constraints of costs and the liability of bricking the radio.

The Satellit and D-808 support the Air band (108-135 MHz). That is ok for occasional listening to one single channel, but forget about channel scanning. I have my Bearcat UBC XLT125 VHF/UHF scanner for that purpose.

Conclusion

Like I started, I’m an occasional shortwave listener. I couldn’t really tell the difference in radio performance between the four radios. Of course, the best radio is the one you have with you. And because of its size, easy operation with a single tuning dial and features like ETM+, the PL-330 is probably the best portable shortwave receiver at the moment (for me ?). Thanks to Tecsun!

Jaap de Goede

October 2020

Many thanks, Jaap, for taking the time and care to put together this excellent overview of the Tecsun PL-330! This will serve nicely as an operation manual. Your father would be proud of you! 🙂

Readers: Please note that you can also download Jaap’s PL-330 guide as a printable PDF document by clicking here. The PDF has even better formatting as Jaap has used operation manual styled fonts to indicate button labels and functions. 

Spread the radio love

Field Notes: Comparing the Tecsun PL-990x and PL-880

9 Replies

Many of you have been asking about the new Tecsun PL-990, especially as compared with the venerable PL-880. If you haven’t checked out Dan Robinson’s post yet, I highly recommend you do so. His long-format video will also give you a good indication of how both radios compare. Also check out George’s review of the PL-990.

I’ve been incredibly busy here at SWLing Post HQ because a number of new products have all arrived at once–most were held up due to supply chain and logistics issues due to Covid-19.

In the background, I’ve been spending some dedicated time with the new PL-990x and comparing it with the PL-880. I’m writing a review of the PL-990 that will appear in the 2021 issue of the World Radio and TV Handbook.

Here are a few of my “field notes” I’ve gathered along the way. Most of these confirm what Dan and I have already stated about the PL-990x, but the notes below address the most common questions I’ve been asked by readers,

Shortwave

As Dan and I have both noted, the PL-880 still has a slight edge on the PL-990 in terms of sensitivity. It’s not a drastic difference in performance, but it is noticeable when comparing the radios in a noise-free location (in the field).

The PL-990 has a proper synchronous detection mode with sideband selection. Unlike the PL-880’s “hidden feature” sync detector, the PL-990 sync detector is quite functional. It does indeed help with selective fading and has an adjustable bandwidth that, in combination with sideband selection, helps mitigate noises or adjacent signals in one half of the carrier.  With that said, I don’t feel the sync lock is as stable as, say, that of the PL-660 or PL-680. I do hear a muted heterodyne “wobble” when tuned to weak stations or during times of deep fading (as we are currently experiencing).

I’ve yet to spend a meaningful amount of time comparing both radios with external antennas connected.

Mediumwave

I’ve been testing this pre-production PL-990x  for a couple weeks already and I do believe it has a slight edge on the PL-880 in terms of mediumwave sensitivity. Not a drastic difference–much like the difference between the two radio on shortwave, but the PL-990x seems to have the upper hand.

FM

Both radios have superb FM reception. I feel like they’re very comparable.

But since the PL-880 has a slightly better built-in speaker, it really can take advantage of FM radio audio fidelity when listening to music, for example. This is not to say that the PL-990 has crappy audio–far from the truth. Indeed, I was impressed with the audio when I first put the PL-990 on the air. You only notice the PL-880’s superior audio while doing side-by-side comparisons. Is it enough to sway my purchase decision? No, not really. For AM and shortwave–which is where I spend most of my time–the PL-990 audio is robust.

PL-990 strong points

A number of PL-880 owners have been asking if it’s worth upgrading to the PL-990. I’m pretty sure Dan and I–both being primarily shortwave enthusiasts–would agree that it’s not worth upgrading to the PL-990 at this point. I would wait to see how the upcoming, much larger, H-501 performs.

I’ve also been asked by readers what I like about the PL-990 in comparison with the PL-880. Here’s a list from my notes:

I prefer the ergonomics and front panel layout of the PL-990. The PL-880 is fine, but the PL-990 is better in my opinion.

The MicroSD card is found on the bottom of the radio.

While I really wished the PL-990 had a recording feature, I do appreciate the new digital audio player with removable MicroSD storage. It’s a simple process to load music, audiobooks, or podcasts on the PL-990. This is especially a bonus for me while I travel because I can also load recordings of ambient noises (from myNoise) to help with sleep in, say, a noisy hotel. (But golly I wish it could record as well!)

Why it’s a “hidden feature” I’m not sure, but I appreciate the fact that the PL-990 can also double as a capable Bluetooth speaker.

Summary

In the end, the PL-990 is not a game-changer in the Tecsun product line: it’s an incremental upgrade in terms of features.

If you own the PL-880 and are primarily an SWL, there’s no need to grab a PL-990 just yet. Wait for the H-501. If you’re considering either the PL-990 or PL-880 and prefer slightly better mediumwave performance, digital audio playback, and Bluetooth functionality, grab a PL-990.

Pricing and availability

Tecsun Radio Australia has just received their first batch of PL-990 inventory and are immediately available for $550 AUD.

Nevada Radio plans to receive their first batch of the PL-990 in the UK next week and have a pre-order price of £259.95.

Anon-Co has not yet posted pricing or availability of the PL-990x, but I expect they will soon.

Production and Pre-production comparison

Tecsun Radio Australia has kindly offered to send me one of their production PL-990 units to compare with the pre-production PL-990x.  I’m very grateful to them for doing this as it will be interesting to see if there are any differences between the two models. Of course, I’ll report my findings in the 2021 WRTH review and notes here on the SWLing Post. The production PL-990 is already en route to SWLing Post HQ via DHL.

For more PL-990 information check out:

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Tecsun PL-990x Initial Assessment

41 Replies

SWLing Post contributor, Dan Robinson, and I have been evaluating a pre-production model of the Tecsun PL-990x portable shortwave radio–the same model which will be soon sold by Anon-Co.

Dan has just completed his initial assessment and included a long-format video. Many thanks to Dan for sharing the following:

Tecsun PL-990x:  An Initial Assessment

by Dan Robinson

Recently, Thomas Witherspoon posted the first photos of the Tecsun PL-990x – we both received units from Anon-co in Hong Kong for testing.

I was able to spend some time outside my house here in Maryland, running the 990x and comparing it to the older receiver by Tecsun, the PL-880.

Tecsun undertook a thorough re-design of the PL-880, which among other things was known for its superb sound through a large speaker.

The 880 was available both on its own, or in a hard-case kit that also included (or includes assuming these are still purchasable) a separate Tecsun-branded solid state recording device, spare knobs and other accessories including Li-ion batteries.

So, the long-awaited PL-990, which we have been seeing in YouTube videos being tested by various individuals who purchased pre-production versions from Asian sites such as AliExpress, is finally here – or will be in coming weeks and months.

Those who view my videos know that I like to do fairly long hands-on tests of receivers, and this is no exception, at about 50 minutes.  My test did not include medium wave or FM, focusing only on shortwave performance and using only the telescopic whip antenna.

Throughout the video, I do put the 990x up against the older PL-880, which had the well-known issue of poorly-implemented synchronous detection (SYNC was not an official feature in the older receiver).

IMPORTANT NOTE:   On the 990x, hitting the “4” key while the radio is powered on activates DNR (Dynamic Noise Reduction) which then activates auto-bandwidth switching, a feature I found quite annoying in the PL-880 and would no doubt find just as annoying in the 990x.  I can’t imagine why anyone would want bandwidths auto-switching on their own.

I always tell people who come to me for advice about radios that you don’t always have to have the latest receiver to enjoy what’s left of shortwave.

I am a big fan of classic older portables such as the SONY ICF SW55s, 7600GRs, SW100s, SW-07s, SW-1000Ts, SW-77s, etc along with other classics such as the Panasonic RF-B65.  I own one or more of most of these – they’re a joy to use assuming they are in good condition.

One more thing – I did not compare the 990x to the Tecsun S-8800.  I think they are really different radios – the 8800 has that gorgeous remote control and fantastic audio . . . I really don’t put it in the same category as the 880/990s or even the 600 series Tecsuns.

I will leave extensive tests of the 990x on medium wave and FM to others – there are already quite a few YouTube demonstrations online showing this.  In the tuning I did on MW and FM, the radio did seem quite sensitive.  I noted that whereas the 9 kHz bandwidth is not visible on shortwave, it is on MW.

Here is my list of high points and low points for the 990x.  Since this receiver, and the still-to-be-released H-501, may in fact be the last we will ever see from Tecsun, it’s up to the individual to make a judgment as to whether to buy.

PL-990x High Points

  • A thorough physical re-design of the old PL-880
  • Tecsun has mostly fixed the problem with synchronous mode which is now a regular as opposed to a hidden feature.
  • Selectivity options are still excellent.
  • Calibration function retained (but see below)
  • Audio is fairly full and powerful.
  • Sensitivity seems good
  • Tecsun has added mp3 play capability and a microSD slot
  • Tecsun has added bluetooth capability (NOTE:  This is activated by pressing the RADIO/MP3 key in powered off state, and then toggling Bluetooth on or off with the PLAY/PAUSE button).
  • Tuning and other knobs remain of high quality as on the PL-880
  • Bandwidths given their own separate buttons
  • Line out retained and hidden feature can adjust line out level
  • Claimed “Triple Conversion” in AM mode
  • Timer functions
  • ATS (automatic station tuning) retained
  • Nice faux-leather case retained

PL-990x negatives:

  • Re-design appears to have come at expense of speaker real estate.
  • Synchronous mode improved, but there still seems to be some distortion which is more noticeable on some frequencies and in some reception situations than others.
  • PL-880’s wide AM bandwidth of 9 kHz is no more at least on SW, but it does appear when using MW.
  • Sensitivity seems good BUT in some situations, PL-880 sounded better and seemed to bring in stations better
  • MicroSD capability does not provide recording from broadcasts (likely due to copyright issues)
  • Method for re-calibrating radio is puzzling – more information needed on this
  • Birdies are present
  • Top element of telescopic antenna is VERY thin, vulnerable to bending and breaking
  • Number keys seem to be not as good as they could be – the white paint on the keys is certain to fade over time.  On my test unit part of the “W” on the MW/LW key was already beginning to disappear.

Selectivity comparison of the PL-990x and PL-880

PL-990x

Selectivity Options on SW:

2.3, 3.5, 5.0, 6.0

Selectivity Options LSB/USB:

0.5, 1.2, 2.3, 3.0, 4.0

Selectivity Options LW/MW:

2.3, 3.5, 5.0, 9.0

PL-880

Selectivity Options SW/LW/MW:

2.3, 3.5, 5, 9

Selectivity Options LW/MW:

0.5, 1.2, 2.3, 3.0, 4.0

Video

Many thanks, Dan, for sharing your initial review with us. As always, your expertise as an experienced DXer is incredibly valuable. 

I’ve tested every function on the PL-990 save some of the hidden features (yes, there will be hidden features). Dan and I are both trying to sort out the calibration sequence so that when these units hit the market, there’ll be a documented procedure in place. 

We’ve been comparing notes along the way and are in agreement on all of the major points with this radio. Still more testing to do, but updated with be posted here with the tag: Tecsun PL-990x

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Detailed photos of the Tecsun PL-990x and difference between it and the PL-990

30 Replies

This week, I received a pre-production unit of the Tecsun PL-990x.

You might have noticed the “x” in the model number which is used to specify the particular model that will be exported and distributed by Anon-Co.

It’s my understanding that the PL-990x is essentially the same as the PL-990 when the MW tuning steps are set to 10 kHz. When set to 9 kHz steps, however, it differs. I was sent the following chart showing the differences between the models:

PL-990x photos

Click to enlarge the following photos:

The side ports have small, protective inserts installed. They’re tiny and not attached in any way to the chassis so could be easily lost.

They can be a bit finicky to put back in as well. I’m sure I’ll simply remove the one from the headphones port permanently and leave the others in.

It’s a nice option to keep unused ports free of dust and dirt.

The radio comes with rubber pads installed on the tuning, fine-tuning and volume knobs. This does add a little extra grip while rotating the knobs, but I don’t personally think they’re necessary. Fortunately, they’re very easy to remove if you don’t like them.

Another thing I love about the PL-990 are the dedicated mechanical switches on the front of the radio for functions like antenna switching, gain/attenuation, and back lighting:

The keypad layout is very logical and in keeping with previous Tecsun models.

I’ll soon be putting the PL-990 through the paces! So far, I’m very impressed with the build quality and built-in speaker audio. I’ve yet to properly evaluate performance.

Funny: I’ve been so eager to check out both the PL-990 and the lab599 TX-500. Both have been held months up due to the Covid-19 pandemic. This week, on the same day, I received them both. For a radio geek like me, it’s almost overwhelming.

Stay tuned–there’s much more to come!

(Also, check out George’s recent PL-990 review!)

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love