Category Archives: FM

A review of the Tecsun H-501x portable shortwave radio receiver

I was recently searching for my review of the Tecsun H-501x on the SWLing Post to send to a reader when I realized I had not yet published it here! Let’s fix that…

The following review of the Tecsun H-501x was originally published in the November 2021 issue of The Spectrum Monitor magazine. Enjoy:

A review of the Tecsun H-501x

by Thomas (K4SWL)

Last year [2020], we were treated to a group of new shortwave portables from Tecsun: the PL-990, PL-330, and the H-501.

Although all of these models garnered attention from shortwave listeners, one model in particular seemed to draw the most interest, the Tecsun H-501.

No doubt, much had to do with the H-501’s size––a large format portable––and especially the twin stereo speakers, that no doubt sparked the interest of those of us who owned (or wished we owned) the venerable Grundig Satellit 500 or 700 with its reputation for robust audio.

Tecsun was also very clear during their product announcement in 2019 that the H-501x is the flagship portable for the Tecsun line.

H-501 versus H-501x

Note that the product being evaluated in this review is the H-501x; the latest “export” version of the H-501.

The differences between these two models is fairly modest. The “x” model gives the user a slightly lower frequency floor in longwave and shortwave, and finer FM tuning (50 kHz as opposed to 100 kHz) when the AM tuning steps are set to 9 kHz as opposed to 10 kHz.

The differences are so modest between the H-501 and H-501x, I wouldn’t be worried if you already have the H-501. I would simply encourage you to only purchase from a reputable Tecsun distributor so you can be confident you’re not receiving one of the very early production runs of the H-501 that was only distributed domestically within China. Some of these early domestic models didn’t have all the refinements of the latest H-501 versions. I would encourage you to only purchase the H-501 or H-501x from a reputable distributors like Anon-Co, Waters and Stanton, Tecsun Radios Australia, and Bonito.

Unique features

Besides the large dual speakers of the H-501x, there are a number of other unique features and design choices that truly set the H-501 series apart from other Tecsun models.

Firstly, the H-501x uses two 18650 Lithium Ion batteries housed in two separate battery compartments. Both batteries can be internally charged, but here’s the interesting part: each battery seems to be somewhat independent of the other. When you engage battery charging, you must select, via a mechanical switch on the back of the radio, “Battery A” or “Battery B.” Only one battery can be charged at a time, and thus only one will power the radio at a time.

More than once, I’ve been listening to the H-501x and the battery indicator started flashing, signifying a low battery. I simply switched the battery switch to Battery B, and, voliá: I have a full battery again! This reminds me of a college friend’s VW Beetle that had a spare fuel tank…with this unique feature, when you were running low on fuel, you’d kick in the spare fuel tank and then make plans to refuel the main tank soon. Of course, with the H-501x, both these “fuel tanks” are also generous ones, in that the batteries last for a good while.

I find that the play time of each battery impressive given the size and audio amplification used in the H-501x. I had worries that the unit’s need for two batteries could suggest a short battery life, but fortunately this hasn’t been the case, no matter what mode I’ve used (FM, AM, shortwave, or Bluetooth).

However I will note here that the supplied switching power supply will inject noise if you try listening to AM or shortwave while charging. This hasn’t affected FM reception, though.

The fold-out metal bail on the H-501x is very large. This shouldn’t have surprised me, but it did. The H-501x is tall and wide, but not very deep––only marginally deeper than, say, the PL-880. The bail needed to be low-profile, but also support this mini “wall” of the radio while in use. The metal wire bail is handy and certainly does the trick, although there’s only one tilt position, and when it’s deployed, the radio effectively has a large footprint. This might limit where you can set it if the surface––say, a bedside table––is small. Not a problem for me, but worth noting. Continue reading →

Spread the radio love

Don Moore’s Photo Album: Ecos del Torbes

10 Replies

Many thanks to SWLing Post contributor, Don Moore–noted author, traveler, and DXer–for the following guest post series:

Don Moore’s Photo Album

by Don Moore

Introduction

When I discovered DXing over fifty years ago I also discovered the world. Through my ears I traveled to other countries and explored other cultures. But DXing has also literally taken me places. My early interest in Latin American DXing developed into a broader interest in Latin America. That led to me joining the Peace Corps after college and working three years in Honduras. That experience furthered my interest in Latin America and I have continued to travel in the region whenever possible. For me DXing and travel were always intertwined. I’m one of a handful of hobbyists who took DXing beyond just listening and went knocking on broadcasters’ doors to visit the distant stations I heard. My ex-wife dubbed this ‘door-to-door DXing.’

To date I’ve visited over 150 radio stations in thirteen countries. A few were medium-wave or FM only, but I was always most interested in visiting broadcasters that used shortwave, either at the time of my visit or a few years before. As my station visits were primarily made in the 1980s and 1990s, almost all of the stations are long-gone from the shortwave bands. However, many are still around on medium wave and FM and often also via streaming on the Internet. As much as I miss the magic of shortwave I know that these stations reach more listeners today via streaming than they ever did with their low-powered shortwave transmitters. Honestly, I sometimes enjoy tuning them in without the fading and static of shortwave. But the memories of what shortwave once was are still there.

Photos also bring back memories. I took dozens of pictures on my station visits and enjoy scrolling through them now and then. You may have seen some of them. Many of my photos were printed with articles I wrote for various DX publications and I’ve done a few slide-shows at DX get-togethers over the years.

In this series of columns I want to share my old photos once again. If you’ve been DXing as long as I have maybe they’ll bring back memories of what you once heard. And if you haven’t been around that long you will have a better understanding of the good old days we oldtimers talk about.

Ecos Del Torbes

There is no better place to start this journey than with Ecos del Torbes. Using ten kilowatts on 4980 kHz, this Venezuelan broadcaster was possibly the most consistent station in the sixty-meter band throughout the 1970s, 80s, and 90s. If you were DXing the tropical bands during those years you surely logged them a few times. If you were lucky you may even have heard their one kilowatt signal on 9640 kHz. They were a very good verifier and for many DXers Ecos del Torbes was among the first Latin American stations QSLed.

Just after Christmas in 1994, my then-wife, four-year-old daughter, and I flew to Mérida in western Venezuela for a family vacation. For ten days we had a great time in this Andean city and then Theresa and Rebecca returned to Iowa while I stayed another week to visit radio stations. I was also getting paid by the Voice of America to research and write a study on the media scene in Andean Venezuela. The now very-out-of-date report can be read at my Patepluma Radio website (which hasn’t been changed in over twenty years and is in need of a facelift).

In that week I visited fifteen radio stations in six towns and cities and Ecos del Torbes was the highlight. I arrived at their doorstep unannounced but was immediately treated as an important guest. I was given a great tour and even got to sit in on a live newscast to see the famous Venezuelan doorbell being used live. I was there about ninety minutes and then walked a block up the street to sister station Radio Táchira. Their facilities were smaller but that’s where the technical offices were and Chief Engineer Ivan Escobar had been told to expect me. Ivan gave me a tour and invited me to visit the Ecos del Torbes transmitter site with him in the afternoon. On the way we stopped by his house where his wife had lunch waiting for us. Visiting Ecos del Torbes was not just the highlight of this trip but ranks as one of my all-time favorite station visits. These pictures bring back many good memories.

Photos

Ecos del Torbes was located in the second floor of this building in downtown San Cristóbal. The entrance was the door on the side.

The small plaque next to the door was easy to miss. I walked right by the first time.

Edgar Fabala of the news department showed me around. Here he demonstrates the mini-xylophones that Venezuelan stations used to make the distinctive ‘doorbell’ sound that separated items in the news reports.

Announcer in the studio preparing to read the news.

The adjoining control room.

Ecos del Torbes had one of the largest record libraries in Venezuela. The LPs were color-coded by type.

Julio Achila was a control room operator who had worked at the station since it opened in 1947.

This pennant was considerably larger than the ones sent to DXers.

Sister station Radio Táchira was located a block up the street on the fourth floor of this building.

The Ecos del Torbes transmitter building.

The 50 kilowatt medium wave transmitter on 780 kHz.

Chief Engineer Ivan Escobar and Don Moore next to the 31 meter transmitter. The larger transmitter was for the well-heard 4980 kHz frequency.

The antenna array used for 4980 kHz. The medium wave tower is in the background.

Dipole antenna used for 9640 kHz.

San Cristóbal once had a third broadcaster on shortwave. Radio San Sebastian used 6070 kHz in the early 1970s. (They were not affiliated with Ecos del Torbes).

That was nearly three decades ago and a lot has changed. Ecos del Torbes and Radio Táchira have been gone from shortwave for over twenty years.

In 1995 Ecos del Torbes was at the corner of Calle 9 and Carrera 8, the same address as when I first QSLed them in 1972. Sometime since my visit they moved an outer neighborhood about two kilometers to the east. To find the new offices locate San Cristóbal on Google maps and then search for “Grupo Radial Gonzalez Lovera”. The transmitter site is still where I visited it and can be seen by plugging the coordinates “7.7885, -72.2725” into Google maps and switching to satellite view. (Ignore the picture that pops up to the side. That’s not it.) Zooming in, the medium wave tower is clearly visible but there are no signs of the old shortwave antennas. I suspect they were sold for scrap years ago. I never have found out where the Radio Táchira transmitter site was.

I’d love to go back to Venezuela someday and see some of the other cities that I used to listen to, such as Barquisimeto, Valencia, El Tigre, and Sucre. Unfortunately the political and economic situation there doesn’t look good and it doesn’t look as if it will improve any time soon. But when it does, I’ll be back.

Click here to check out all of Don Moore’s Photo Album columns. Each new article will appear on the SWLing Post home page/feed and in this link.

Spread the radio love

“The Texas Tank: A Prison Radio Station Changing Lives”

1 Reply

SWLing Post friend and contributor, David Goren, notes that a piece he’s produced and Maria Margaronis has presented is now available to listen to online via BBC Radio 4:

(Source: BBC Radio 4 with Photo credit from Michael Starghill))

The Allan B. Polunsky Unit in Livingston, Texas, used to be known as the Terror Dome for its high rates of inmate violence, murder and suicide. Polunsky houses all the men condemned to death in Texas (currently 185) and nearly 3,000 maximum security prisoners. But since the pandemic, a prison radio station almost entirely run by the men themselves has helped to create community–even for those on death row, who spend 23 hours a day locked alone in their cells.

The Tank beams all kinds of programmes across the prison complex: conversations both gruff and tender; music from R&B to metal; the soundtracks of old movies; inspirational messages from all faiths and none. The station’s steady signal has saved some men from suicide and many from loneliness; it lets family members and inmates dedicate songs to each other and make special shows for those on their way to execution. Maria Margaronis tunes in to The Tank and meets some of the men who say it’s changed their lives—even when those lives have just weeks left to run.

Produced by David Goren.

Click here to listen to The Texas Tank: A Prison Radio Station Changing Lives on Radio 4.

Spread the radio love

Small Unidirectional Loop Antenna (SULA) Part 3: Questions & Answers

7 Replies

Many thanks to SWLing Post contributor extraordinaire, 13dka, who brings us Part Two of a three part series about the new SULA homebrew antenna project. This first article describes this affordable antenna and demonstrates its unique reception properties. The second article focuses on construction notes. This third and final article will essentially be a Q&A about the SULA antenna.

This wideband unidirectional antenna is an outstanding and innovative development for the portable DXer. I love the fact that it came to fruition via a collaboration between Grayhat and 13dka: two amazing gents and radio ambassadors on our SWLing.net discussion board and here on the SWLing Post. So many thanks to both of them!

Please enjoy and share Part 3:

Part 3: SULA Q&A

by 13dka

Q: Where can I ask questions, discuss all aspects of the the SULA or collaborate in its further development?

A: There is a thread dedicated to the SULA in the new SWLing.com message board: https://swling.net/viewtopic.php?t=55

Q: Since the antenna is “lossy”, what’s the point of having a “beam”?

A: The answer is once again “SNR”: First off, remember that the LNA is there to make up for most of the losses. Secondly, this is all about the noise pickup, 20dB less gain/more losses outside the main lobe means also a reduction of atmospheric/cosmic/whatnot QRN and of course everything manmade from all these sides. The wide horizontal lobe is more or less one hemisphere horizontally, but the flat-ish vertical pattern makes that only a slice of it. In other words, there will be less QRN and QRM pickup from the back and the top. The idea is that the SNR will ideally increase more than the preamp’s noise figure will cost and it often sounds like this is what actually happens. Of course it’s also nice that you can turn an unwanted signal down using the more or less pronounced notch in the backside pattern up to 21 MHz – also very helpful for direction finding.

Q: Do I need a rotor?

A: It depends. If you are one of the lucky few still having a low-QRM-environment at home and you want to put it in the backyard, you really may want to be able to turn it remotely. If you’re using it portable you can simply rotate the mast manually. If you have local QRM or can’t mount it very far away from your or other houses, you may want to rotate the back of the antenna towards that source, leave it at that position forever and enjoy what’s coming in on the pretty wide main lobe of the antenna. The horizontal lobe covers more or less half of the horizon, depending on your stations of interest and location you could get away with never turning the antenna at all.

Q: Is it better than the XYZ loop?

A: Hey, that’s exactly what I wanted to ask you! 🙂 Even though the SULA is very similar in appearance and performance to a good SML working in ideal (ground conductivity) conditions, the SULA is a pretty different animal with a different behavior: Regular small loops, besides being bidirectional, can lose quite a bit of their low angle sensitivity over “poor” ground while the SULA is supposed to be retaining its properties better over any type of ground. Also, while many SMLs are tuned for VLF through the lower portion of the shortwave, the SULA complements those with quite uniform (good) properties up to 30 MHz and beyond.

Q: I have an end-fed random wire or dipole strung up from the house to a tree etc. – can the SULA beat that?

A: That’s quite possible. To get low takeoff angles from horizontal wire antennas you need to string them up at least 1/2 wavelength high, that’s 20m/66ft on 40/41m, 10m/33ft on 20m and so on. If you can’t do that, the SULA may be your ticket to listen farther beyond the horizon. Also, wire antennas are often strung up to match space restrictions or avoid QRM vectors and that way you may end up with some directionality in directions you don’t want, or no directionality at all when the wire is too low. Another noteworthy point is the ground: For most horizontal antennas, better ground means a considerable higher takeoff angle so the dipole needs even more height for low angles. The SULA’s takeoff angle benefits a little from the better ground and only gets a little worse over poor ground.

Q: Do I really need an LNA?

A: I hope so? Of course it depends… if you are going to try this antenna in a very noisy environment, the LNA may have little to no benefit. The noise is limiting your “radio horizon” to very loud signals anyway and for those you may not need an LNA, ever. On the other hand, the antenna is very lossy and in a quiet environment where noise is not an issue at all, weak signals may drop below the sensitivity threshold of your receiver without the LNA. The less noise you have, the more you’ll be able to benefit from an LNA. You will also need one when your radio isn’t all that sensitive, similar to the requirements to run a YouLoop. Andrew kept the loop impedance as constant as possible in order to allow any low impedance coax preamp to work behind the Balun. Any LNA with 20dB of gain should do, as per usual, better stuff may bring better results.

Among the sparse offers for decent shortwave LNAs, the NooElec LANA HF seems to be the only decent LNA sold via Amazon. It’s comparatively low-cost and unlike the other offers on Amazon, ready to be powered via Bias-T or even via Micro-USB and therefore happy with 5V. Since I also had the balun from the same company I could simply connect that all with a couple of these cute little SMA plumbing bits and it worked. The downside is its unknown but perceivably low resilience against intermodulation (low 3rd-order intercept point), this is usually not a problem with such a small loop but it can be in the presence of nearby transmitters.

If you do have nearby transmitters and don’t mind sourcing an LNA from Europe, Andrew recently pointed me to preamps from here. They offer a moderately priced preamp with a 2N5109 transistor (based on the W7IUV design) for a high IP3 value and low noise, which is also available in PCB-only and fully assembled versions including a compartment. They also offer Bias-T boxes.

Q: What is special/different about this antenna? There are already very similar designs!

A: It’s supposed to be simpler and more compact/portable, and it seems to deliver more consistent results over the entire coverage range in different usage environments than similar designs. The SULA was designed to be made with things that are particularly easy to obtain, or which were already obtained — many of us SWLs have some of that Nooelec stuff in our drawer anyway, even when (or because) we’re not habitual antenna builders and balun winders. Now making a better balun and buying a better preamp is not hard and could even bring better results but the point is that you don’t have to. In summary, this is not meant to be a miracle antenna, just number of compromises re-arranged to create a particularly uncomplicated, small, unidirectional loop antenna that aims for DX, for apartment dwellers and DX nomads like me.

Spread the radio love

Radio Waves: The Gamut All Digital at 4 Years, Glory Days of Pirate Radio, AIR to Kashmir, and Podcast Collaborations

5 Replies

Radio Waves: Stories Making Waves in the World of Radio

Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

Many thanks to Eric Jon Magnuson for summarizing these news items for Radio Waves!

Hubbard Is Four Years In With All-Digital AM. Here’s How It’s Doing. (Inside Radio)

It has been just over four years since Hubbard Radio’s adult alternative “The Gamut” WWFD, Frederick, MD (820) powered down its analog signal and began operating as a digital-only AM station under experimental authority granted by the FCC. Since then, new FCC rules permitting all-digital AMs industrywide have broadcasters taking a closer look at WWFD as they consider options for struggling AMs.

WWFD posted a 1.5 share (12+) in Nielsen’s Frederick, MD spring survey with a weekly cume of 3,300. Before it went all digital, Dave Kolesar, Senior Broadcast Engineer at Hubbard and the station’s PD, says it was a ratings no-show, “a wasted signal.”

The idea for making the all-digital leap came around Christmas 2016 when Kolesar concluded that a music format on AM – even one as differentiated as The Gamut’s expansive playlist – was “pretty much a nonstarter that exists for the purpose of having an FM translator. In all-digital mode, the AM signal has the capability of becoming relevant again” with digital sound quality, and artist and album title and album artwork displays.

According to Xperi, about 35% of cars on the road in the DC market are equipped with HD Radio receivers. Yet only a small fraction of listening to radio in the market is to AM radio. The station focuses on the one-third of the market that could enjoy a music format that looks and feels like any other service in the dashboard. The strategy involves using the FM translator as promotional vehicle for the digital AM frequency: “when you’re outside the coverage area of our 94.3 FM signal, tune into 820 and hear us while you’re driving around,” Kolesar explains. [Continue reading…]

OPINION: Remembering the glory days of pirate radio 55 years on (Eastern Daily Press)

Radio DJ Tom Edwards looks back at his youth spent broadcasting off the East Anglia coast

Although I’ve lived in Lincolnshire for nearly 30 years having been born and educated in Norwich, I will of course always be a Norfolk man. At 77 years of age now I’ve been a broadcaster for 57 of those years.

During Easter of 1964 a somewhat mysterious radio station came on the airwaves playing non-stop music and the presenters seemed to be just ad libbing at the microphone in contrast to the rather staid BBC light programme which hardly played any popular music. The station turned out to be the now famous Radio Caroline, which was transmitting from a ship off the East Anglia coast.

I was a Bluecoat at Pontins holiday camp at Pakefield and the site had a Radio Pontins Tannoy system so I asked the boss for some money to buy some 45 hit singles which he agreed to and so started doing record requests for the happy campers.

Other stations, whether they were ships or wartime fortresses, suddenly began to appear right around the coast of the UK. Apart from Caroline there were other stations including Radio London, Radio England, Radio270 and Radio 390.

The more I heard of these stations, which were becoming so popular with an estimated audience of 22 million, the more I wanted to be out there at sea with them. I wrote and sent tapes of my Pontins shows to all of them. While on a few days off in Norwich, a man called Reg Calvert called me and said he liked what he heard and offered me a weekend try out on Radio City. [Continue reading…]

AIR’s Station At 9,000 Feet Along LoC In Kashmir Broadcasts Programs For People Living Across Border (India Times)

Surrounded by the barbed wires, dense deodar trees and Pir Panchal mountains in the backdrop, this is the All India Radio (AIR) Srinagar’s Radio Station which has been set up close to the Line of Control (LoC) in Rustum area of J&K’s Uri sector.

Set up in November 2020, the station has been built 9,000 feet above the sea level.

The radio station has been set up with an aim to provide access to the Kashmiri people living on the other side of the border to listen to their favourite programs.

“The local news, music programs and especially Pahari and Gojari programs are aired from this station for the Kashmiri population living on the other side of the LoC,” said Qazi Masood who heads the station in Uri. [Continue reading…]

Podcast Collaborations: The positives, the pitfalls, and the public interest (Public Media Alliance)

Three top public media podcast executives discuss with PMA the benefits and complications that come with collaborations, and how ultimately, they can help public media organisations fulfil their public service obligations.

As the podcast market globally becomes ever more saturated and competitive, PMA invited three top podcast executives from three leading public media organisations to discuss how collaborations might provide the pathway for public media organisations to remain the premier podcast producers. It came after a talk about podcast collaborations at Radiodays Europe in Malmö, Sweden in May 2022.

They spoke to PMA’s Editorial Manager, Harry Lock.

Harry Lock: Could you give me some examples of podcasts which you’ve worked on where you collaborated with another organisation? How does it actually work logistics-wise?

Arif Noorani, Director of CBC Podcasts: Hunting Warhead is a collaboration we did with VG, Scandinavia’s biggest newspaper, on a story they’d spent more than two years on (it was nominated for a Prix Italia.) Production wise – CBC led the podcast and embedded a VG team member in the production team providing contacts, research and notes on scripts.

We have three international co-productions with the BBC World Service – launching in the next year. It’s an equal joint effort – Jon Manel, commissioner for the BBC World Service and I co-lead all aspects of the project. We think the combined heft of CBC Podcasts and the BBC World Service was attractive. We meet weekly and more (along with Whatsapping each other if it’s urgent) to discuss production, content, rollout and all the business side of things. We have one point person between the production teams and the BBC/CBC to keep it streamlined. To make this work, you have to have lots of trust between all sides, and a shared vision of the type of content you want to make (in this case journalistically-driven serialised narrative storytelling rich in characters and heartbeat). Jon and I have informally collaborated for a few years so that really helped. We’ll also combine our audience building, digital and marketing efforts in the launch and rollout.

Andrew Davies, Digital and Engagement Editor, ABC Australia: Co-productions and collaborations with external organisations/partners is still a relatively new area for the ABC in podcasting. There have been a number of collaborations between Radio National (ABC’s specialist talks network) and the BBC but those have mostly been radio focused. The ABC’s Audio Studios team did a co-production with WNYC Studios a few years ago with Short & Curly, our very popular ethics podcast for children.

More recently we’ve worked with Arif and the CBC Podcasts team around the release of series two of our popular Stuff The British Stole podcast. That involved the CBC team helping with audience building (through cross-promotion, publicity, marketing and digital/social content) in the North American market. That was a really successful collaboration and we were excited to work with the CBC as we knew they recognised not just what a great show it is but also wanted to help it reach a bigger audience. There were a large number of people involved from both broader teams but I want to echo Arif’s point about having clear point people on both sides to keep things streamlined.

Tim Watkin, Executive Producer of Podcasts & Series, RNZ: RNZ Podcasts has produced 46 podcasts in partnership with 38 different organisations. That includes other broadcasters and media, production houses and funders. Collaboration can take many forms.

The most common form of collaboration for RNZ is where we make a podcast alongside an independent production company. For example, Eating Fried Chicken in the Shower is a series that was pitched to us by an independent producer, Charlie Bleakley, and host James Nokise. RNZ paid for the series but was very hands-on, more than a mere commission. We provided a supervising producer, sound recordist on location, draft audio edits, studios for the final mix and promotion. [Continue reading…]

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Radio Waves: AM/FM Receiver Sales Stabilize, Asheville Radio Museum Adds Model HS2, Legacy remains of WSY, and Farewell to WCFW

4 Replies

Radio Waves: Stories Making Waves in the World of Radio

Welcome to the SWLing Post’s Radio Waves, a collection of links to interesting stories making waves in the world of radio. Enjoy!

AM/FM Receiver Sales Have ‘Stabilized’ Even As Audio Turns Up On More Devices. (Inside Radio)

Anyone who has tried to find an AM/FM receiver in a big box retailer knows they are not as easy to find as they once were. It is little surprise then that the Consumer Technology Association expects fewer to sell this year. But at roughly five million units now sold each year, CTA expects that number to hold steady in the years to come, in part due to the role radio plays during emergencies.

“That category has stabilized,” said Rick Kowalski, Director of Industry Analysis and Business Intelligence at CTA. “It’s a low number relative to other categories, but there’s a steady demand, just in terms of people having an AM/FM radio for those situations where you might need a battery-powered radio as a backup.”

CTA forecasts 4.7 million traditional radio receivers will be sold this year in the U.S. That is six percent lower than the five million units sold in 2021. “Looking out in the next five years. It’s not going to get much lower than that,” Kowalski said in an interview.

CTA projects 24.5 million smart speakers will sell this year, or roughly five-times as many as traditional radio receivers. But in what may be a surprise to many, that estimate is actually two percent lower than the 25 million smart speakers that CTA says were sold last year. [Continue reading…]

“Bringing it home” Asheville Radio Museum adds local piece of history to its collection (WLOS)

ASHEVILLE, N.C. (WLOS) — The Asheville Radio Museum has added a new piece of history to its’ collection!

It’s a 1922 radio receiver built by an Asheville-based business.

The model HS2 radio the museum procured is only one of two known to exist.

Collector and restorer Robert Lozier found that it was the first name brand radio built in North Carolina.

News 13 spoke to the director of media communications Peter Abzug about why this radio is so significant.

“Having this radio here, in Asheville, where it was built is really significant,” he said. “It’s bringing it home. Although the company itself didn’t last for years and years, it did employ people and it was a significant part of Asheville’s history, and something we can be very proud of.”

Click here to watch the video at WLOS.

Legacy remains of WSY, Alabama’s first radio station (Alabama News Center)

Innovation is at the historic heart of Alabama Power, beginning with its founding in 1906 and Capt. William Patrick Lay’s vision of electrifying the state by harnessing the power of Alabama’s rivers.

But the company’s embrace of another cutting-edge technology, just 16 years after Alabama Power’s incorporation, is also historic.

One hundred years ago this year, on April 24, 1922, Alabama Power hit the airwaves with the state’s first operating radio station. WSY (an acronym for “We Serve You”) began broadcasting from rented space in a building on Powell Avenue in Birmingham.

The 500-watt AM station was initially designed as a company tool, to provide better communications among employees – especially those in the field and at remote generating plants. In fact, radio technology was so new – regularly scheduled radio programming in the United States started only in 1920 – Alabama Power engineers had to design and build most of WSY’s transmitting equipment.

“We began assembling the set … with intentions of using it for purposes of operation of the system exclusively,” wrote George Miller, the employee in charge of the station, in the July 1922 issue of the company’s Powergrams. “The broadcast feature came up, though, and materially changed our plans.”

Indeed, a month before the station went on the air, The Birmingham News published a do-it-yourself piece about “how to make your own radiophone receiving set” so local residents could pick up WSY when it began broadcasting.

Interest in the station was so strong that within weeks it began offering entertainment programs, according to “Developed for the Service of Alabama,” the centennial history of Alabama Power, written by noted historian Leah Rawls Atkins.

Dee Haynes, with the Alabama Historical Radio Society, recalled one story that underscores WSY’s popular embrace. Soon after WSY went on the air, earpieces began disappearing from the handsets of payphones all over Birmingham, apparently because people were swiping them to use in home-built receiving sets. [Continue reading…]

FAREWELL TO FM: A Grandson’s Recollections of His Family’s Legacy Radio Station, WCFW (Volume One)

For 54 years, WCFW has been a beloved independently owned radio station on 105.7FM. But for lifelong Eau Claire resident Parker Reed, it has been more than that: it’s his family’s life, love, and legacy.

A catchy jingle – featuring the melody “WCFW, where FM means fine music” – came across a young radio station owner’s desk in 1969.

It was short, simple, and it worked. The owner paid $25 for it, and more than 50 years later that same jingle – which has aired thousands of times on 105.7FM radio – exemplifies the values of WCFW in Chippewa Falls and the couple who have owned it for over half a century: simplicity and consistency.

My grandparents, Roland and Patricia Bushland, have owned and operated WCFW since its inaugural broadcast on the airwaves on Oct. 20, 1968. Earlier this summer, they decided to end their 54-year stint in radio, selling the legacy station to Magnum Media – a Wisconsin-based media organization owned by Dave Magnum who now owns 25 radio stations across the state and will take over operations of the quaint, easy-listening station later this fall.

It’s a bittersweet moment – for the community, yes, but especially for our family, for whom the station has been an integral part of our lives for decades.

“It’s hard to not have mixed feelings about it, because it was our life for so long,” said my grandmother, Patricia Bushland. “When you start something, and you’re the only people who ran it all those years, you get attached to it. But after so many years, I’m thrilled to death that someone new is coming in, and we can finally take a break.”

When my grandfather, Roland, was young, he would draw pictures of radio towers during school – as his life too began with radio, front and center. My great-grandfather Roy Bushland owned and operated multiple Bushland Radio Specialties storefronts in Chippewa Falls and Eau Claire since the early 1930s – a business where my grandfather got his start in 1952 after he graduated Chippewa Falls High School as salutatorian. [Continue reading…]

Do you enjoy the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Spread the radio love

Introducing the amazing SULA: An affordable unidirectional DX-grade loop antenna that you can build!

43 Replies

Many thanks to SWLing Post contributor extraordinaire, 13dka, who brings us a three part series about the new SULA homebrew antenna project. This first article describes this affordable antenna and demonstrates its unique reception properties. The second article will focus on construction notes. The third and final article will essentially be a Q&A about the SULA antenna. All articles will eventually link to each other once published.

This wideband unidirectional antenna is an outstanding and innovative development for the portable DXer. I love the fact that it came to fruition via a collaboration between Grayhat and 13dka: two amazing gents and radio ambassadors on our SWLing.net discussion board and here on the SWLing Post. So many thanks to both of them!

Please enjoy and share SULA Part 1:

Introducing the Small Unidirectional Loop Antenna (SULA) 1-30MHz

A small and simple, unidirectional and DX-capable loop “beam” for SWLs!

by 13dka

In early June, Andrew (grayhat), SWLing Post‘s resident antenna wizard suggested a variation of the “cardioid loop” on the SWLing Post message board: The original “cardioid loop” is a small loop receiving antenna deriving its name from a cardioid shaped (unidirectional) radiation footprint. The design is strikingly simple but it has a few downsides: It relies on a custom preamp, it needs a ground rod to work and it is unidirectional only up to 8 MHz.

Andrew’s version had the components all shuffled around and it did not only lose the ground rod, it also promised a nice cardioid pattern over the entire shortwave, from a small, diamond shaped loop. Wait…what? It can be made using parts available on Amazon and your DIY store:

You need some 3m wire and PVC tubes to create a support structure to hold the wire, a 530 Ohm resistor and a 9:1 balun like the popular “NooElec One Nine”. Since it’s a “lossy” design, adding a generic LNA like the NooElec “LANA HF” would help getting most out of it. When you put that all together you have what sounds like an old shortwave listener’s dream: a small, portable, tangible, and completely practical allband shortwave reception beam antenna with some more convenient properties on top, for example, it is a bit afraid of heights.

That sounded both interesting and plain crazy, but the .nec files Andrew posted were clearly saying that this antenna is a thing now. Unfortunately Andrew suffered a little injury that kept him from making one of those right away, I on the other hand had almost all the needed parts in a drawer so I ended up making a prototype and putting it through some of its paces, with Andrew changing the design and me changing the actual antenna accordingly, then mounting it upside down. Let me show you around:

Small, diamond shaped wire loop (with 76cm/29.92″ sides), needing as little space as most other small loops.
Unidirectional with a ~160° wide “beam” and one pronounced minimum with a front/back-ratio of typically 20dB over the entire reception range 1-30MHz.
Moderate height requirements: It works best up to 3m/10′ above ground, where it gives you…
…a main lobe with a convenient flat takeoff angle for DX
Antenna is comparatively insensitive to ground quality/conductivity.
Wideband design, works best on shortwave and is pretty good up to 70cm.

A functional small beam antenna for shortwave reception that’s just as small and possibly even more lightweight (prototype:~250g/9oz) than your regular SML, that can be easily made out of easy to obtain parts and easily carried around for mobile/portable DXing and due to its cardioid shaped directional pattern also for direction finding, a “tactical” antenna that’s also doing DX? Unlike conventional, Yagi-Uda or wire beams it can achieve a low takeoff angle at only 3m/10ft height or less, the front/back ratio is typically better than that of a 3-element Yagi, with a particularly useful horizontal pattern shape. That it’s rather indifferent to soil quality could mean that more people get to reproduce the good results and being a real wideband antenna is making the SULA an interesting companion for multiband radios and SDRs. Really? A miracle antenna? Is it that time of year again? If I had a dollar for every….

Continue reading →

Spread the radio love